|◀ ◀ 397 - 408 of 591 ▶ ▶|
View:

96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0261410A

    • Item#:
    N96MSN0261410A
    Manufacturer Item:
    N96MSN0261410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0451714A

    • Item#:
    N80MSN0451714A
    Manufacturer Item:
    N80MSN0451714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    96% Performance Series Gas Heating Furnace 35" H x 21" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+

    International Comfort Products N96VSN1002120B

    • Item#:
    N96VSN1002120B
    Manufacturer Item:
    N96VSN1002120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN_SPEC

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0601716A

    • Item#:
    N96MSN0601716A
    Manufacturer Item:
    N96MSN0601716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    Oil Furnace Mobile Home 60-72K BTU Output 86% AFUE 120 VAC 4" Flue 3 Ton Cooling

    Thermo Pride OME-72T36 Steel Mobile Home Oil Furnace, 86% AFUE, 120 volt, 85000 BTU Input, 72000 BTU Output
    • Durable reinforced interlocking steel casing with powder coated finish
    • Highly efficient, 16 ga aluminized steel Octatherm heat exchanger, top-quality control system, easy-access service port
    • Foil-faced fiberglass insulation and high-efficiency, direct-vent oil burner
    • Designed to fit many existing bases and optional combustion air connection, insulated blower compartment
    • High torque, low speed, direct drive motor and easy access, easy cleaning, permanent, washable filter
    • Partitioned burner and blower compartments
    • Pre-purge, post-purge, positively closing solenoid oil burner is safe and odor-free
    • Intermittent ignition system
    ,
    ,

    Thermo Pride OME-72T36

    Item#:
    OME-72T36
    Manufacturer Item:
    OME-72T36
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OME-72T36_Install
    OME-72T36_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701712A

    • Item#:
    N80MSN0701712A
    Manufacturer Item:
    N80MSN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Oil Furnace Lo-Boy Direct Drive 101-132K BTU Output Front Flue (BURNER NOT INCLUDED)

    Thermo Pride OL8FA119T60 Oil Furance Direct Drive 101-132 BTU Output Front Flue,
    ,

    Thermo Pride OL8FA119T60

    Item#:
    OL8FA119T60
    Manufacturer Item:
    OL8FA119T60
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OL8FA119T60

    Oil Furnace Low-Boy ECM Motor ECM Motor 90K BTU Rear Flue

    Highlights
  • The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings.
  • It is designed to fit nicely in your low ceiling basement since it is 11 shorter than a typical highboy furnace.
  • Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils). This means the lower furnace height makes the installation job less cumbersome for installers and saves on your costs.
  • Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you.
  • Utilizes the Thermo Pride 13-gauge copper coated Octatherm heat exchanger.
  • The OH6 is available with a Beckett, Carlin or Riello oil burner.
  • The OH6 provides Annual Fuel Utilization Efficiencies (AFUE) of 86% for Beckett AFG and Carlin EZ-1HP and 86.1% for Riello BF3.
  • With a simple nozzle change to vary the firing rates, your contractor can customize the OH6 to meet the specific needs of your home.

    Thermo Pride OL6RA072T60

    • Item#:
    OL6RA072T60
    Manufacturer Item:
    OL6RA072T60
    Manufacturer:
    THERMO PRODUCTS, LLC

    96% Performance Series Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+

    International Comfort Products N96VSN0401712B

    • Item#:
    N96VSN0401712B
    Manufacturer Item:
    N96VSN0401712B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0401712B_Spec

    96% Peformance Series Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+
    • Item#:
    N96VSN0401712A
    Manufacturer Item:
    N96VSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0401712A

    Oil Furnace Mobile Home 60-72K BTU Output 86% AFUE 120 VAC 4" Flue 3 Ton Cooling

    Thermo Pride OME-72D36 Steel Mobile Home Oil Furnace, 86% AFUE, 120 volt, 85000/70000 BTU Input, 72000/60000 BTU Output
    • With Beckett AFG burner
    • Durable reinforced interlocking steel casing with powder coated finish
    • Highly efficient, 16-gauge aluminized steel Octatherm heat exchanger, top-quality control system, easy-access service port
    • Foil-faced fiberglass insulation and high-efficiency, direct-vent oil burner
    • Designed to fit many existing bases and optional combustion air connection, insulated blower compartment
    • High torque, low speed, direct drive motor and easy access, easy cleaning, permanent, washable filter
    • 12" width x 12" depth supply air outlet
    • 14" height x 22" depth return air outlet
    • 4" flue diameter
    • Partitioned burner and blower compartments
    • Pre-purge, post-purge, positively closing solenoid oil burner is safe and odor-free
    • Intermittent ignition system
    ,
    ,

    Thermo Pride OME-72D36

    Item#:
    OME-72D36
    Manufacturer Item:
    OME-72D36
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OME-72D36_Install
    OME-72D36_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0801716A

    • Item#:
    N92MSN0801716A
    Manufacturer Item:
    N92MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install
    |◀ ◀ 397 - 408 of 591 ▶ ▶|
    View: