|◀ ◀ 589 - 600 of 650 ▶ ▶|
View:

Oil Furnace Lo-Boy 70-117K BTU Output 85% AFUE 120 VAC 6" Flue 3.5 Ton Front Flue

Thermo Products VLF-DBP Oil Furance Lo-Boy Front Flue,
JB Industries WP-2
Item#:
VLF-DBP
Manufacturer Item:
VLF-DBP
Manufacturer:
THERMO PRODUCTS, LLC
 
VLF-DBP

Oil Furnace Lo-Boy 70-117K BTU Output 86% AFUE 120 VAC 6" Flue 3.5 Ton Rear Flue

Thermo Products VLR-DCP Oil Furance Lo-Boy Carlin Burner 86% 132-156K BTU On High Fire,
Item#:
VLR-DCP
Manufacturer Item:
VLR-DCP
Manufacturer:
THERMO PRODUCTS, LLC
 
VLR-DCP

Electric Strip Heater 7.5 KW 240/1 VAC

Warren WHE0802X Electric Strip Heater 7.5 KW 240/1 VAC,
Item#:
WHE0802X
Manufacturer Item:
WHE0802X
Manufacturer:
WARREN TECHNOLOGY

Electric Heater 240 VAC 7.2 KW

Warren WGS0752H Electric Heater 240 VAC 7.2 KW

Item#:
WGS0752H
Manufacturer Item:
WGS0752H
Manufacturer:
WARREN TECHNOLOGY
 
WGS0752H

Oil Furnace Hi-Boy Beckett Burner 85% 90-106K BTU On High Fire 86% AFUE 4 Ton Cooling

Thermo Pride VHF-ABP Powder Coated Highboy Oil Furnace, 85% AFUE, 120 volt, 106250/85000/70000 BTU Input, 90000/72000/60000 BTU Output
    With Beckett AFG burner
  • Front flue
  • Low profile
  • Spirit furnaces are equipped with a multi speed direct drive blowing motor
  • 4 Ton cooling capacity
  • Entire blower assembly can be removed for cleaning
  • Fully insulated cabinet to reduce energy loss
  • 19" width x 19" depth supply air outlet
  • 24" height x 14-1/4" depth return air outlet
  • 7" flue diameter
  • Preformed refractory chamber of ceramic fiber heats up quickly, re-radiates heat back into the fire providing more complete combustion, and cools down quickly after the burner stops
  • Heavier metal and hand welded wrap around design provides smoother airflow for even heat, quieter operation, and 70 deg F nominal temperature rise for comfort
Item#:
VHF-ABP
Manufacturer Item:
VHF-ABP
Manufacturer:
THERMO PRODUCTS, LLC
 
VHF-ABP_Spec

Oil Furnace Lo-Boy 70-117K BTU Output 86% AFUE 120 VAC 6" Flue 3.5 Ton Front Flue

Thermo Products VLF-DCP Oil Furance Lo-Boy Carlin Burner 86%,
Item#:
VLF-DCP
Manufacturer Item:
VLF-DCP
Manufacturer:
THERMO PRODUCTS, LLC
 
VLF-DCP

Electric Strip Heater 240/1 VAC 10KW


Item#:
WZH1002X
Manufacturer Item:
WZH1002X
Manufacturer:
WARREN TECHNOLOGY

Unit Heater Suspended Hydronic 33,000 (High) 23,000 (Low) Copper Tube/Alumium Fins

  • Reznor Model WS Steam/Hot Water Suspended Heaters are design-engineered to be technically advanced and esthetically pleasing which makes it the hydronic heater for the 21st century.
    This smart new concept in commercial heating units will accommodate all architects who are looking for something new and different.
  • The heating range of Model WS is 13,000 to 350,000 BTUH. The air volume ranges from 270 to 4,750 CFM.
  • The heat exchanger is made of one or two rows of steel coils (standard or optional copper coils) with aluminum
  • The standard steel tubing is very strong and long lasting. Steel tubing is designed for hot water applications up to 150 psi.
  • The copper tubing used for the heating coil is very thick (0.03, 0.75 mm), making Reznor heating coils extremely sturdy and long lasting. The copper tube diameter is 0.867 (22 mm) O.D. The large tube diameter reduces the water pressure drop, which means these units require lower pump pressure than other hydronic heaters. It also allows a very rapid heat radiation. For steam heating applications copper tube (Option HA12) is required. Designed for high working steam pressure up to 145 psi (10 bar), every heat exchanger is subjected to a pressure test at over 350 psi (25 bar) before leaving the factory.
  • The heat exchanger assembly receives a special epoxy-polyester powder coating which makes the coil long lasting and increases the thermal output.
  • The Fan/Motor Assembly is made up of three components: the fan, the motor and the fan guard, which also acts as the main support for the fan. This fan guard is galvanized for protection against corrosion, and is mounted onto the main casing with anti-vibration rubber mountings. The fan guard meets OSHA requirements.*
  • The standard 2-speed motor is a hermetically sealed motor which is maintenance free. The motor is wired for Data Chart for fan RPM, heating output and CFM ranges. output, or low speed for reduced noise level. All motors have internal protection as a standard feature.
  • All Model WS units can be installed for either vertical or horizontal discharge.
  • pre-painted steel helps protect the cabinet against oxidation.
  • The cabinet is held together by shake-proof screws and molded corner sections to add additional strength and installation.
  • The optional Air Flow Induction Optimizer is available for horizontally discharged units. The Air Flow Induction the heated air stream. See the optional accessories section for more information.
  • Units are packaged into strong corrugated cardboard cartons with strengthened upper and lower side sections. These containers are clearly marked with the model number, size and approximate shipping weight.
  • Units are manufactured in an ISO 9001 registered facility.
    • Item#:
    WS23/33C
    Manufacturer Item:
    WS23/33C
    Manufacturer:
    REZNOR LLC
     
    WS-Series-Broc
    WS-Series-Install
    WS-Series-Spec

    Duct Furnace Suspended 250K BTU Gravity Vented 120 VAC

    Nortek Global(Reznor) X-250 Duct Furnace Suspended 250K BTU Gravity Vented 120 VAC
    Item#:
    X-250
    Manufacturer Item:
    X-250
    Manufacturer:
    REZNOR LLC
     
    X-Series-Gas-Conversion-Parts_Misc
    X-Series-Reznor_Spec

    Forced Air Propane Heater 70K BTU M18

    Our M18 70,000 BTU Forced Air Propane Heater delivers best in class heat output and is equipped with optimal access to heat settings. The variable heat output control and forced air fan allow for optimal heat in cold weather conditions, delivering BTUs Rated from 30,000 - 70,000. Powered by a brushless motor, our M18 Propane Heater will deliver all day run time on an M18 XC 5.0 battery (batteries and charger sold separately). With AC/DC functionality and ergonomic design, our Propane Heater can easily be transported and used in various well-ventilated environments. The M18 Propane Heater has an easy to follow start up process, with a straightforward user interface on the top of the unit for easy access and quick ignition. Equipped with on-board hose storage, this Propane Heater provides space to store its hose and regulator directly on the unit.
    Item#:
    0801-20
    Manufacturer Item:
    0801-20
    Manufacturer:
    MILWAUKEE ELECTRIC TOOL CORP.

    Oil Tank 12 Gauge Steel Residential Narrow Vertical 240 Gallon 47" x 23" x 60" Gray

    Granby 202201G Granby 12 Gauge Steel Oil Tank Residential Narrow Vertical,
    Item#:
    202201G
    Manufacturer Item:
    202201G
    Manufacturer:
    GRANBY INDUSTRIES LP
     
    Granby-Industries-Residential-Tank_Spec

    Oil Tank 12 Gauge Steel Residential Vertical 240 Gallon 47" x 23" x 60"

    Granby 202701-1 Granby 12 Gauge Steel Oil Tank Residential Vertical,
    Item#:
    202701-1
    Manufacturer Item:
    202701
    Manufacturer:
    OIL TANKS
     
    Granby-Industries-Residential-Tank_Spec
    |◀ ◀ 589 - 600 of 650 ▶ ▶|
    View: