Clean-Fit Products Blue Monster 76003 Blue Heavy Duty Industrial Grade Blue Monster industrial grade PTFE enriched pipe thread compound is a slow drying, soft setting, non-hardening pipe thread compound. Blue Monster has a high bulk density, which means there are more solids in the formulation. This allows you to work the product into the valley of the threads giving you greater sealing capabilities to fill any voids that occur under different tolerances of pipe and fittings. Blue Monster with PTFE is recommended for on site or assembly line work. It is lead-free, non-toxic and will not harden or separate in the can. When applied properly, Blue Monster allows the system to be pressurized immediately after assembly. It does not require any set or cure time. Blue Monster PTFE pipe thread sealant is formulated with PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials.,

Clean-Fit Products 76003

Mars 93247 High-Temperature Heat Resistant Silicone for Use Around Furnace Vent Pipes, Restaurant Hoods and Heat Exchangers, 2.8 oz. Squeeze Tube, Red

Mars HVAC/R high-temperature red silicone sealant is a superior quality silicone which was formulated to perform at temperatures ranging from -85 to 500 deg F for continuous operation and 600 deg F for intermittent exposure



Motors & Armatures 93247

Cliplight Super Seal Advanced, now with DRY R to eliminate moisture, is a faster and compressor-friendly method of permanently sealing and preventing leaks in A/C and refrigeration systems. DRY R boosts sealant performance, increases drier efficiency, while preventing waxing and acid formation.

For all systems up to 1.5 Ton/5 kw
• Advanced sealing power with moisture eliminator
• Faster no recovery, no pump down
• Contaminant and particle-free
• Compatible with all oils and refrigerants
• Super seal advanced is engineered to HVACR industry standards and is easily installed into a fully charged system, with no pump down or recovery
• Recommended for systems that are not losing more than 15% of the entire charge over a four week period
• Eliminates 2 drops/1 mL of water
• .95 g/cu-cm at 25 deg C density
• Vacuum packed can
• Hose
  
  

  Cliplight 947KIT

Mars 93526 Drain Pan Seal Caulk,

Motors & Armatures 93526

Cliplight Super Seal Advanced 948KIT Commercial Leak Sealant with Hose, 3 oz., Can

Super seal advanced, now with dry R to eliminate moisture, is a faster and compressor-friendly method
• Dry-R boosts sealant performance, increases drier efficiency, while preventing waxing and acid formation
• Advanced sealing power with moisture eliminator
• Faster - no recovery, no pump down
• Contaminant and particle-free
• Compatible with all oils and refrigerants
• Large systems above 5 Ton, above 5 kw
• Contains 89 ml
  
  

  948KIT

Cliplight 944KIT Super Seal Leak Sealant ,

Cliplight 944KIT

Diversitech 995 Flex Inject Sealant Total W/UV Dye for Systems Up to 6

995

Quietflex Metalized Polyester Boxed Package Air Duct Sleeve, 8" Diameter x 5' L, R6

27541

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

13062 All Purpose Pipe Cement 16 oz.,

Bramec 13062

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

13061 All Purpose Pipe Cement 8 oz.,

Bramec 13061

Rectorseal 23551 Thread Sealant 1/2 Pint

RectorSeal 23551