Nu-Calgon 4050-05 EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats fractional to 1.5 Ton
• Strongest sealant on the market
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TXVs, cap tubes or pistons
• New UV dye formula available for detection of larger leaks
  
  

  Nu-Calgon 4050-05

Nu-Calgon 4296-50 Pan-Spray is an effective, easy-to-use water proof rubberized coating that won't chip, flake or peel. It's ideal for sealing out rust and corrosion as well as repairing leaky condensate pans, cooling towers, swamp coolers, roofing, gutters and down spouts. Pan-Spray is the perfect solution for emergency and permanent repair.

Reliable rubberized coating
• Quick and economical answer to repair troublesome leaks
• Stays flexible and won't freeze or sag
• Contains no CFC's
• Ideal for sealing out both rust and corrosion
• Can be painted
  
  

  Nu-Calgon 4296-50

Nu-Calgon 4296-51 Pan-Spray Condensate Pan Leak Sealer, 16 oz. Can, Gas, Pan-Spray is an effective, easy-to-use water proof rubberized coating that won't chip, flake, or peel. It's ideal for sealing out rust and corrosion as well as repairing leaky condensate pans, cooling towers, swamp coolers, roofing, gutters, and down spouts. Pan Spray is the perfect solution for emergency and permanent repair. It is a quick, easy and economical repair on troublesome leaks. Use on condensate pans, swamp coolers, humidifier pans, plumbing and pipe fixtures, roofing, downspouts or gutters.

Nu-Calgon 4296-51

Duro Dyne DuroSeal EDS-RSC Vinyl Acetate Water Based Duct Sealant, EDS-RS is a smooth Water Based Duct Sealer designed for use in high velocity air conditioning, refrigeration, ventilating, and air distributing systems up to 15 WG. It is suitable for use in both indoor and outdoor applications and exceeds all SMACNA Pressure and Sealing Classes.,

5233

Duro Dyne 5231 EDS-RS is a smooth Water Based Duct Sealer designed for use in high velocity air conditioning, refrigeration, ventilating, and air distributing systems up to 15 WG. It is suitable for use in both indoor and outdoor applications and exceeds all SMACNA Pressure and Sealing Classes.

Non-flammable and non-hazardous
• Mold and mildew resistant
• Exceeds all SMACNA pressure and sealing classes
• Low, medium and high pressure applications up to 15" WG
• Fast dry time
• Less shrinkage allows installer to fill larger joints and provides less slump
• Excellent adhesion to metal
• Very good elasticity
• Very thixotropic
• Product can be easily scooped out of the bucket onto the brush without the duct sealer sliding off the brush
• Can be exposed to moisture quicker when applied outdoors because it cures much quicker than other products on the market
• Anti-microbial biocide package included to prevent the growth of mold
• Cartridge is auto-filled, creating less air pockets
• Minimum 24 months at 72 deg F storage life
  
  

  Duro Dyne 5231

Clean-Fit Products Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from Galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Compatible with a broad range of gases and liquids
• Compatible with a broad range of piping materials will not harden or crack on the joints
• Effective across a broad range of temperatures and pressures
• Acts as a thread lubricant and anti-seize
• Prevents electrolytic corrosion of threads
• No curing time
• Unlimited shelf life
• Non-flammable
• 99.6% PTFE less than 0.4% composition
• Greater than 100% elongation
• Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000kPa
• Temperature range -450 to 500 deg F PTFE is completely stable up to 500 deg F
• Decomposition is slow up to 750 deg F
• Although decomposition will occur on contact with naked flames
• Note - pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
  
  

  Clean-Fit Products 70887

Clean-Fit Products 3-wrap yellow gas seal tape is a PTFE thread sealing tape designed specifically for gas lines. This is a full or maximum-density thread sealing tape. Mill-Rose 3-wrap yellow gas seal tape is approved by relevant authorities and used by the gas industry world-wide. It's color-coded yellow so fitters and inspectors can easily recognize it as an approved tape.

Just 3 wraps for leak-proof joints



Clean-Fit Products 70820

Clean-Fit Products Blue Monster Compression Seal Tape stops problem leaks while under pressure - without turning off the water source! Developed for professional plumbing contractors, Blue Monster Compression Seal Tape is ideal for crisis and long-term applications. Blue Monster Compression Seal Tape features self-fusing layers that form a waterproof compression seal. Seal leaks up to 150 psi on any type of rigid piping, from Galvanized and cast iron to copper and all types of plastics and rubber. Blue Monster Compression Seal Tape contains no adhesive. This tape seals by compression, so pulling the tape as tight as possible forms a chemical reaction that fuses the layers of tape into a mass of silicone. Once fused, the silicone mass forms a heavy-duty bond on the leak or connection that serves as an emergency or long-term repair. Blue Monster Compression Seal Tapes are offered in 1 in and 2 in width. Use the"big" 2 in width tape for larger applications as it requires fewer wraps for a leak-proof seal. No waste and no re-taping make sealing joints a breeze.

Stops problem leaks under pressure without turning off the water source!
• Seal leaks up to 150 psi (water, air and steam)
• Self-fusing layers for a waterproof, long term compression seal
• Effective to 500 deg F/260 deg C temperature
• Suitable for burial without jacketing
• Environmentally safe and non-toxic
• Stops and prevents corrosion
• Safe for drinking water
• All purpose - use on iron, brass, copper, aluminum, stainless steel, Galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS and more easy to use no waste
  
  

  Clean-Fit Products 76085

Blue Monster PTFE pipe thread sealant is formulated with PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2). It is inert and compatible with a very wide range of materials. Use blue monster on threads made from all metals, PVC, CPVC, ABS and nylon plastic pipe systems.

Specially formulated for production line use
• Adheres to oily threads
• Non-hardening industrial grade thread sealing compound with added PTFE
• Non-toxic
• Slow drying
• Easy cleanup
• Soft set
• Grit free
• Low odor
  
  

  Mill-Rose 76005

Clean-Fit Products Blue Monster PTFE pipe thread sealant is formulated with PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2). It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from all metals, PVC, CPVC, ABS and nylon plastic pipe systems. Now available in a convenient 2 oz. squeeze tube. Specially formulated for extra lubrication on metal pipe threads. Ideal, compact size for any tool box or storage bin. Non-hardening, slow-drying soft-set formula is non-toxic and grit free.

Brushable from -50 to 400 deg F
• Pressure ratings - gases up to 3000 (211 kg/sq-cm ), liquids up to 10000 (703.1 kg/sq-cm)
• Not recommended for use on oxygen systems
• Use clean-fit 3 wrap oxygen PTFE tape
• Specially formulated for production line use
• Adheres to oily threads
• Non-hardening
• Non-toxic
• Slow-drying
• Easy clean-up
• Soft set
• Grit free
• Low odor
• With PTFE
  
  

  Clean-Fit Products 76001