Polymer Adhesives Sealant Systems Airseal 22 AS22-1 Smooth Water Based Duct Sealant, 1 Gallon, White

• Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
• Has excellent mold and mildew resistant
• 18 months in unopened container shelf life
• Cures to a tough, Flexible film

,
,

Polymer Adhesives Sealant AS22-1

Polymer Adhesives Sealant Systems Airseal 33 AS33-T-G Fiber Reinforced Water Based Duct Sealant, 10.5 oz Tube, Gray

• Fast dry time
• High solids content
• Has excellent mold and mildew resistant
• Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
• 18 months in unopened container shelf life

,
,

Polymer Adhesives Sealant AS33-T-G

Provides a protective coating or gasket where parts must perform at temperatures up to 500°F.

Accmetric BOSS326

Everkem DP-44242 Leak Sealant W/Hose

Everkem DP-44242

RectorSeal EP-200 is a pre-measured, high grade epoxy and hardener formulated together in one stick, making it easy to break off the amount needed for each repair. RectorSeal epoxy putty bonds to most surfaces and hardens in 15 to 20 min. It can then be sanded, painted, drilled, taped and machined.

• Pressure tested to 1300 psi
• Can even harden under water
• Contains no asbestos
• No special tools required
• Permanent repair
• Premeasured resin and hardener in 1 tube
• Used to bond, seal, plug, mold and rebuild

,
,

RectorSeal EP200

RectorSeal EP400 Epoxy Putty Tube 4 oz Gray/White/Bronze 1.9 Specific Gravity,
,

RectorSeal EP400

Carlisle Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, fiberglass duct board, flex duct and duct fabric. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays Flexible and will not crack. Flex-Grip's excellent coverage rates and brush-on application provide low installed cost.

• Heavy brush-on and spray grade consistency
• Synthetic latex base
• Excellent water resistance

,
,

Carlisle FG550-1

Fire Seal fireblocking caulk meets and exceeds standards for fireblocking/firestopping single-family residential construction. Fire Seal possesses superior adhesion and freeze-thaw characteristics and is the contractors #1 choice for fireblocking non-rated wood- frame construction. Fire Seal will not shrink, crack, or crumble upon cure. Fire Seal creates an air-tight barrier to prevent the passage of flames, smoke, and toxic gases from spreading area to area within concealed spaces.

• Great adhesion
• Smooth consistency
• Identifiable color
• Chemically compatible with flowguard gold blazemaster and corzan pipe fittings as well as all PVC, CPVC, ABS, PEX tubing and other applicable tested penetrating items
• Low VOC
• CPVC compatible
• Water-based type
• Silicate mortar chemistry
• 2 hr fire rating
• Glossy paste physical uncured state
• Solid mortor physical cured state
• Evaporation rate is slower than ether
• Volatiles is 35 - 39 % by weight at 21 deg F
• Excellent 5 cycles freeze - thaw stability

,

,

Everkem Diversified Products FS-136

Polymer Adhesives Sealant Systems FS-T Intumescent Firestop Sealant, 10.5 oz

,
,

Polymer Adhesives Sealant FS-T

RectorSeal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2" and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded Galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.

• For use with potable water (hot or cold)
• Lead free and contains no other metals
• Soft setting, slow drying
• Brushable
• Will not dry out in the can
• Multi purpose - wide range of service uses
• For pressure up to 12000 psi (liquids) and 2600 psi (gases)
• Smooth easy application
• Permits easy break out with no damage to threads
• Economical - requires only a small amount
• Reduces friction to allow tighter joint makeup
• Lubricates and protects threads
• 2 years shelf life

Sid Harvey Item #:F3-63A: Replaces Part #:'s : 7G175,
,

RectorSeal F3-63A