Mitco 70-104 Line Set Flush 2LB|2PACK

Mitco 70-103 Line Set Flush 2LB Aerosol

Mitco 20-107M Maximum Injection Seal W/UV Dye 1-.5-7.5 Ton,
,

20-107M

Mitco 20-110M Maximum Seal XL4 (2-10 Tons),

Boss 125 multi seal building/construction sealant is a multipurpose, one part sealant, formulated from a hybrid polymer. This unique sealant is free from solvents, silicone, isocyanates and other hazardous raw materials. It cures on exposure to atmospheric moisture to form a highly durable flexible sealant. Multi seal has been formulated to offer outstanding primerless adhesion to most common building materials including vinyl, aluminum, steel, concrete, wood and glass. It can be applied and tooled under most weather conditions. This sealant is paintable with most latex base paints.

12507

Boss 125 multi seal building/construction sealant is a multipurpose, one part sealant, formulated from a hybrid polymer. This unique sealant is free from solvents, silicone, isocyanates and other hazardous raw materials. It cures on exposure to atmospheric moisture to form a highly durable flexible sealant. Multi seal has been formulated to offer outstanding primerless adhesion to most common building materials including vinyl, aluminum, steel, concrete, wood and glass. It can be applied and tooled under most weather conditions. This sealant is paintable with most latex base paints.

• Ease of use, one part sealant, no mixing required
• Good weather ability virtually unaffected by sunlight, rain, snow, ozone and temperature extremes
• Good UV resistance and color stability
• Long life reliability, cured sealant stays flexible without tearing, cracking, drying out or becoming brittle
• With its non slump properties, can be used in vertical, horizontal and overhead joints
• Wide temperature gunnability, can be applied in any season
• Non yellowing and non staining
• Non streaking
• Paintable with most latex base paints
• Free from solvents and isocyanates

,
,

12519

Boss 125 multi seal building/construction sealant is a multipurpose, one part sealant, formulated from a hybrid polymer. This unique sealant is free from solvents, silicone, isocyanates and other hazardous raw materials. It cures on exposure to atmospheric moisture to form a highly durable flexible sealant. Multi seal has been formulated to offer outstanding primerless adhesion to most common building materials including vinyl, aluminum, steel, concrete, wood and glass. It can be applied and tooled under most weather conditions. This sealant is paintable with most latex base paints.

12501-BOSS

These thread sealants are a variation of our basic RectorSeal® No. 5 formulation modified for specific applications where low odor, non-staining, and soft set features are desired. RectorSeal® No. 5 Special is especially formulated for use around gas detection equipment. RectorSeal® No. 5 Sub-Zero is especially formulated for low temperature applications and is brushable to -35 deg F. They are listed under the uniform plumbing code (IAPMO) file no. 1282. In addition, they are approved and listed with the Canadian standards association (CSA).

• Soft set
• Won't dry out in the can
• Non-hardening and odorless
• Smooth easy application
• Non-staining all weather formula
• Lubricates and protects threads
• Breaks out easily without damaging threads
• Lead free and contains no other metals
• For use with water systems
• Reduces friction to allow tighter joint makeup
• 2 years minimum shelf life
• 11.8 lb/Gallon plus or Minus 0.5 at 77 deg F

Sid Harvey Item #:26431: Replaces Part #:'s : 1M321,
,

26431

RectorSeal® No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2" and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded Galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.

• For use with potable water (hot or cold)
• Lead free and contains no other metals
• Soft setting, slow drying
• Brushable
• Will not dry out in the can
• Multi purpose - wide range of service uses
• For pressure up to 12000 psi (liquids) and 2600 psi (gases)
• Smooth easy application
• Permits easy break out with no damage to threads
• Economical - requires only a small amount
• Reduces friction to allow tighter joint makeup
• Lubricates and protects threads
• 2 years shelf life

Sid Harvey Item #:F3-63A: Replaces Part #:'s : 7G175,
,

F3-63A

RectorSeal® No. 5 is our most popular thread sealant. It has withstood the test of time in a variety of uses and is widely known as the standard of the industry. RectorSeal® No. 5 is a soft setting, slow drying thread sealant made from special inert fillers dispersed in an oleoresinous base to facilitate its application to threaded pipe connections. RectorSeal® No. 5 is a unique, versatile and reliable sealant that is non toxic in accordance with NSF Standard 61-G and 372.

• Lead free and contains no other metals
• Brushable from 20 - 140 deg F
• Will not dry out in the can
• Immediate pressurization on pipe up to 2" and 100 psi
• Smooth easy application
• Permits easy break out with no damage to threads
• Economical - requires only a small amount
• Reduces friction to allow tighter joint makeup
• Lubricates and protects threads
• 2 years shelf life

,
,

F3-61A