|◀ ◀ 961 - 972 of 1393 ▶ ▶|
View:

Item#:
UN12

Item#:
UN1

Cushion Clamp 2-1/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX21834

    • Item#:
    UX21834
    Manufacturer Item:
    UX21834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX21834_Broc

    Copper Coated 2-Hole Tubing Clip 1"

    Warwick Hanger 100-10 Copper Plating Carbon Steel 2-Hole Tubing Clip, 1"
    • Our copper plated tubing clips are designed to snap onto the tubing for hands free nailing
    ,
    ,

    Warwick Hanger W100-10

    Item#:
    W100-10
    Manufacturer Item:
    100-10
    Manufacturer:
    WARWICK HANGER COMPANY
     
    Warwick-Hanger_Broc

    Item#:
    X88.15
     
    HangerLok-Product-Guide_Broc
    X88.15_Spec

    Item#:
    X88.12
     
    HangerLok-Product-Guide_Broc
    X88.12_Spec

    Item#:
    X88.32

    Item#:
    X88.25

    Item#:
    X88.28

    Item#:
    X88.22

    3-Hole Conduit Hanger 1/4" 50 lb.

    Sunrise Electric Supply 0B Silver Zinc-Plated Low Carbon Cold Rolled Steel 3-Hole

    Sunrise Electric 0-B

    Item#:
    0-B
    Manufacturer Item:
    0-B
    Manufacturer:
    ELECTRICAL PARTS & FITTINGS

    Adjustable Swivel Ring Hanger 1-1/4" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301734 Adjustable Swivel Ring Hanger 1-1/4"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,
    ,

    Anvil 0500301734

    • Item#:
    0500301734
    Manufacturer Item:
    0500301734
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301734
    |◀ ◀ 961 - 972 of 1393 ▶ ▶|
    View: