Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 73 - 84 of 1132 ▶ ▶|
View:

Package Roof Top Unit Gas 3 Ton 36K BTU 14 SEER 460/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV036LEFA0AAA

    • Item#:
    RGV036LEFA0AAA
    Manufacturer Item:
    RGV036LEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGVSERIES_Spec

    Air Handler Multi-Position 2-1/2 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied



    INTERNATIONAL COMFORT PRODUCTS FXM4X3000AL

    • Item#:
    FXM4X3000AL
    Manufacturer Item:
    FXM4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3000AL_Spec

    Oil Furnace Hi-Boy 107-129K BTU Output 85-86.3% AFUE 120 VAC 5 Ton Cooling

    Heil OMF High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 126000 - 154000 BTU, 2000 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed

      OMF154L20

    Item#:
    OMF154L20
    Manufacturer Item:
    OMF154L20A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMF154L20_Spec

    QuietComfort 96 Heating Gas Furnace 35" H x 21" W x 29-1/2" D

  • Up to 96%+ AFUE in upflow and horizontal positions 95% AFUE in downflow
  • ION Communicating Control System
  • Variable-speed, constant airflow ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    F96CTN1002122A
    Manufacturer Item:
    F96CTN1002122A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    Oil Furnace Hi-Boy 81-94K BTU Output 85-85.2% AFUE 120 VAC 3.5 Ton Cooling

    Heil OMF High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 95200 - 112000 BTU, 1400 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed

      OMF112K14

    Item#:
    OMF112K14
    Manufacturer Item:
    OMF112K14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMF112K14_Spec

    QuietComfort 96 Heating Gas Furnace 35" H x 21" W x 29-1/2" D

  • Up to 96%+ AFUE in upflow and horizontal positions 95% AFUE in downflow
  • ION Communicating Control System
  • Variable-speed, constant airflow ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products F96CTN0802120A

    • Item#:
    F96CTN0802120A
    Manufacturer Item:
    F96CTN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    Air Handler Multi-Position 1-1/2 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 17-5/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X1800AL

    • Item#:
    FXM4X1800AL
    Manufacturer Item:
    FXM4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X1800AL_Spec

    Oil Furnace Hi-Boy 59-80K BTU Output 81.9-85% AFUE 120 VAC 2.5 Ton Cooling

    Heil OMF High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 70000 - 98000 BTU, 1200 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed

      OMF098J10

    Item#:
    OMF098J10
    Manufacturer Item:
    OMF098J10B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMF098J10_Spec

    Gas Furnace 2-Stage 80K BTU 96% AFUE ECM Motor Up/Downflow 17" Communicating

    International Comfort Products F96CTN0801714A Gas Furnace 80K BTU 96% AFUE ECM Motor Up/Downflow 17",

    International Comfort Products F96CTN0801714A

    ,

    F96CTN0801714A

    Item#:
    F96CTN0801714A
    Manufacturer Item:
    F96CTN0801714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    Air Handler Multi-Position 5 Ton 208/230 TXV R410A ECM Motor 59-3/16" H x 24-11/16" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X6000BL
    Manufacturer Item:
    FVM4X6000BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X6000BL_Install
    FVM4X6000BL_Spec

    Oil Furnace Lo-Boy 81K BTU Output 85-86.8% AFUE 120 VAC 4 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel

    Kenmore OLV High-Gloss Baked Lowboy Oil Furnace, 85 - 86.8% AFUE, 115 VAC, 95200 - 112000 BTU, 1600 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • Variable speed ECM motor that provides true constant CFM capabilities
    • Fan control switch for continuous fan operation
    • Easy access control panel
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • High gloss baked finish

      OLV112A16

    Item#:
    OLV112A16
    Manufacturer Item:
    OLV112A16A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLV112A16_Spec

    Package Roof Top Unit Gas 3 Ton 36K BTU 14 SEER 208/230/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    RGV036HEFA0AAA

    • Item#:
    RGV036HEFA0AAA
    Manufacturer Item:
    RGV036HEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    |◀ ◀ 73 - 84 of 1132 ▶ ▶|
    View: