Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 85 - 96 of 1060 ▶ ▶|
View:

QuietComfort 96 Heating Gas Furnace 35" H x 14-3/" W x 29-1/2" D

  • Up to 96%+ AFUE in upflow and horizontal positions 95% AFUE in downflow
  • ION Communicating Control System
  • Variable-speed, constant airflow ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    F96CTN0601714A
    Manufacturer Item:
    F96CTN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    Oil Furnace Lo-Boy 81-94K BTU Output 85.6-86.5% AFUE 120 VAC 4 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel

    Heil OLR High-Gloss Baked Lowboy Oil Furnace, 86.5% AFUE, 115 VAC, 95200 - 112000 BTU, 1600 cfm
    • Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • Direct drive motor permanently lubricated for long life performance
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Easy access control panel
    ,
    ,



    OLR112A16


    OLR112A16

    Item#:
    OLR112A16
    Manufacturer Item:
    OLR112A16A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLR112A16_Spec

    Air Handler Multi-Position 2 Ton 208/230 TXV R410A ECM Motor 42-11/16" H x 17-5/8" L x 22" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X2400BL
    Manufacturer Item:
    FVM4X2400BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X2400BL_Install
    FVM4X2400BL_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

    Quiet performance
  • Variable-speed, constant airflow (VCA) ECM blower motor and two-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • Wi-Fi enabled remote access with the Ion System Control
  • 10-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration



    F80CTL0451712A


    F80CTL0451712A

    • Item#:
    F80CTL0451712A
    Manufacturer Item:
    F80CTL0451712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F80CTL_Spec

    Oil Furnace Lo-Boy 66-82K BTU Output 85-86.1% AFUE 120 VAC 3 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel

    Heil OLR High-Gloss Baked Lowboy Oil Furnace, 86.1% AFUE, 115 VAC, 70000 - 98000 BTU, 1200 cfm
    • Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • Direct drive motor permanently lubricated for long life performance
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Easy access control panel
    ,


    icp olr098a12


    icp olr098a12

    Item#:
    OLR098A12
    Manufacturer Item:
    OLR098A12A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLR098A12_Spec

    Mini-Split Condenser Cool Only 12K BTU 120/1 R454B

    INDUSTRY LEADING FEATURES / BENEFITS
    A PERFECT BALANCE BETWEEN BUDGET
    LIMITS, ENERGY SAVINGS AND COMFORT
    .
  • The D5CERAA series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
    The ductless system permits creative solutions to design problems such as:

    Add-ons to current space (an office or family room addition)
    Special space requirements
    When changes in the load cannot be handled by the existing system
    When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
    Historical renovations or any application where preserving the look of the original structure is essential. The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. The compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
    • Item#:
    D5CERAA12AAJ
    Manufacturer Item:
    D5CERAA12AAJ
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    D5CERAA_SPEC

    Air Conditioning Condensing Unit 4 Ton 18 SEER 2 Stage 230/1 R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5A8T48CKAWA
    Manufacturer Item:
    N5A8T48CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    ICP Heat Pump Condensing Unit 3 Ton 14.3 SEER 1 Stage 230/1 R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5H5S36CKAAA
    Manufacturer Item:
    N5H5S36CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H5S-Series-ICP_Spec
    N5H5S_SPEC

    92% Modulating Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/NOx emissions requirement



    R92MSN0801716A


    R92MSN0801716A

    • Item#:
    R92MSN0801716A
    Manufacturer Item:
    R92MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92MSN-ICP_Spec

    Piston #73

    International Comfort Products Fast Parts 1174017 Piston #73

    International Comfort Products Fast A/C Parts 1174017

    Item#:
    1174017
    Manufacturer Item:
    1174017
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Handler Heat Pump 7-1/2 Ton 460/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 49 W x 28-3/16 L

  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    FHS091LAAA2A0A

    • Item#:
    FHS091LAAA2A0A
    Manufacturer Item:
    FHS091LAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHS
    FHS091LAAA2A0A_Spec

    Zone Damper Slip-In Bottom Mount 10" x 20" 3 Wire

    Internatinoal Comfort Procusts
  • Zone Damper
  • Slip-In
  • Bottom Mount
  • 10 x 20
  • 3 Wire



    DAMPSLB10X20-B


    DAMPSLB10X20-B

    • Item#:
    DAMPSLB10X20-B
    Manufacturer Item:
    DAMPSLB10X20-B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ICP-Damper_Install
    ICP-Damper_Spec
    |◀ ◀ 85 - 96 of 1060 ▶ ▶|
    View: