Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 61 - 72 of 1132 ▶ ▶|
View:

ICP Heat Pump Condensing Unit 1-Stage 1.5 Ton

Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability

    International Comfort Products N4H5S18CKAAA

    • Item#:
    N4H5S18CKAAA
    Manufacturer Item:
    N4H5S18CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H5S-ICP-Service_Misc
    N4H5S-ICP_Install
    N4H5S-ICP_Spec

    Air Handler Apartment Fan Coil Upflow Only 3 Ton Piston 208/230 R410A 39-1/2" H x 22" L x 19" D

  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit

    International Comfort Products FMA4X3600AL

    • Item#:
    FMA4X3600AL
    Manufacturer Item:
    FMA4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMAX COILS
    FMA4X3600AL_Spec

    Air Conditioning Condensing Unit Quiet Performance 3 Ton 15 SEER

    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the oz.one
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N4A5S36CKAWA

    • Item#:
    N4A5S36CKAWA
    Manufacturer Item:
    N4A5S36CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A5S-ICP-Care_Misc
    N4A5S-ICP_Broc
    N4A5S-ICP_Install
    N4A5S36CKAWA_Spec

    ICP Heat Pump Condensing Unit 1-Stage 1.5 Ton

    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability

    International Comfort Products N4H5S18AKAAA

    • Item#:
    N4H5S18AKAAA
    Manufacturer Item:
    N4H5S18AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H5S-ICP-Service_Misc
    N4H5S-ICP_Install
    N4H5S-ICP_Spec

    Air Handler Apartment Fan Coil Upflow Only 2-1/2 Ton Piston 208/230 R410A 39-1/2" H x 22" L x 19" D

  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit

    INTERNATIONAL COMFORT PRODUCTS FMA4X3000AL

    • Item#:
    FMA4X3000AL
    Manufacturer Item:
    FMA4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMAX COILS
    FMA4X3000AL_Spec

    QuietComfort 96 Heating Gas Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions
  • 95% AFUE in downflow position
  • All models earn the ENERGY STAR
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193


    International Comfort Products F96VTN0601714A

    • Item#:
    F96VTN0601714A
    Manufacturer Item:
    F96VTN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96VTN_Spec

    Air Handler Apartment Fan Coil Upflow Only 1-1/2 Ton Piston 208/230 R410A 36-1/2" H x 20-1/2" W x 15" D

  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit

    International Comfort Products FMA4X1800AL

    • Item#:
    FMA4X1800AL
    Manufacturer Item:
    FMA4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMAX COILS
    FMA4X1800AL_Spec

    QuietComfort 96 Heating Gas Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions
  • 95% AFUE in downflow position
  • All models earn the ENERGY STAR
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193


    • Item#:
    F96VTN0401712A
    Manufacturer Item:
    F96VTN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96VTN_Spec

    Oil Furnace Hi-Boy Multi-Position 95-112K BTU Output 86-86% AFUE 120 VAC 3.5 Ton Cooling

    Heil OMV High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 95200 - 112000 BTU, 1400 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Variable speed ECM motor that provides true constant CFM capabilities

      OMV112K14

    Item#:
    OMV112K14
    Manufacturer Item:
    OMV112K14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMV112K14_Spec

    Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    FXM4X3600AL

    • Item#:
    FXM4X3600AL
    Manufacturer Item:
    FXM4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3600AL_Spec

    Air Conditioning Condensing Unit Quiet Performance 1.5 Ton 15 SEER

    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the oz.one
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N4A5S18AKAWA

    • Item#:
    N4A5S18AKAWA
    Manufacturer Item:
    N4A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A5S-ICP-Care_Misc
    N4A5S-ICP_Broc
    N4A5S-ICP_Install
    N4A5S18AKAWA_Spec

    Oil Furnace Hi-Boy Multi-Position 52-80K BTU Output 81.9-85% AFUE 120 VAC 2.5 Ton Cooling

    Heil OMV High-Gloss Baked Highboy Multi-Position Oil Furnace, 86% AFUE, 115 VAC, 70000 - 98000 BTU, 1200 cfm
      Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • True 4-way multipoise unit that opens up installation possibilities
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Variable speed ECM motor that provides true constant CFM capabilities

      OMV098J12

    Item#:
    OMV098J12
    Manufacturer Item:
    OMV098J12B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OMV098J12_Spec
    |◀ ◀ 61 - 72 of 1132 ▶ ▶|
    View: