S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Item#:
FHX091H2AA0AUA
Manufacturer Item:
FHX091H2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
1-1/2 thru 4 tons
Available for environmentally balanced R-410A systems
Factory installed piston metering device with Teflon ring
Sweat connections
Aluminum Tube, Aluminum Fin Evaporator
Primary and secondary drain fittings with brass inserts
Multiple electrical entry locations
Time delay relay (TDR)
Field installed heater packages from 5 kW - 30 kW available separately
HUD approved for manufactured housing
208/230-1-60 supply voltage
Assembled at the factory compliant with low leak requirements of less
than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet
leakage rate at 0.5 inches W.C. when tested in accordance with
ASHRAE 193 standard.
1 inch thick insulation with R value of 4.2
Multiposition installation - upflow or horizontal left standard,
horizontal right with minor modification (field convertible to
downflow with available accessory kit)
No Heat (Plug) Kit factory installed
Filter (washable) available as accessory
ECM 5-speed motor
Low voltage circuit protective fuse (3amp) inline on wire harness
Item#:
FEM4X3000BL
Manufacturer Item:
FEM4X3000BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
FHX120L2AA0AUA
Manufacturer Item:
FHX120L2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
STANDARD FEATURES
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes.
Integrated motor controls, with 90-sec off TDR function, have
replaced integrated circuit board.
Five available speed tags to meet a wide range of applications.
Large, grooved tube, louvered fin coils.
Efficient, quiet, time-tested blower housings and diffusers.
Sturdy, drainable condensate pans.
Construction innovations designed to prevent cabinet sweating.
Tested for condensate disposal in much tougher conditions than Air
Conditioning and Refrigeration Institute requirements.
Super-thick R-4.2 insulation with vapor barrier.
Pre-painted galvanized steel cabinet (dark grey).
Design meets stringent regulations for cabinet air leakage of less than
2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches
W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design
available for 42 thru 60 sizes. Facilitates attic and crawlspace
installations..
Horizontal hanging provisions on cabinet.
Newly improved filter rack area filter door insulation added for
improved air seal. No tools required to access filter.
3 through 30 kW accessory heaters - field installed.
Easy plug-in provisions for heater installation.
Entry options for high and low voltage wiring hook-up.
Leak-preventing sweat connections.
Factory installed thermostatic expansion valve, TXV, on all coils.
Designed for manufactured housing applications
Item#:
FHMA5B42L0CA
Manufacturer Item:
FHMA5B42L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5X24L0BA
Manufacturer Item:
FHMA5X24L0BA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5X48L0CA
Manufacturer Item:
FHMA5X48L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5X42L0CA
Manufacturer Item:
FHMA5X42L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5B48L0CA
Manufacturer Item:
FHMA5B48L0CA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
1-1/2 thru 4 tons
Available for environmentally balanced R-410A systems
Factory installed piston metering device with Teflon ring
Sweat connections
Aluminum Tube, Aluminum Fin Evaporator
Primary and secondary drain fittings with brass inserts
Multiple electrical entry locations
Time delay relay (TDR)
Field installed heater packages from 5 kW - 30 kW available separately
HUD approved for manufactured housing
208/230-1-60 supply voltage
Assembled at the factory compliant with low leak requirements of less
than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet
leakage rate at 0.5 inches W.C. when tested in accordance with
ASHRAE 193 standard.
1 inch thick insulation with R value of 4.2
Multiposition installation - upflow or horizontal left standard,
horizontal right with minor modification (field convertible to
downflow with available accessory kit)
No Heat (Plug) Kit factory installed
Filter (washable) available as accessory
ECM 5-speed motor
Low voltage circuit protective fuse (3amp) inline on wire harness
Item#:
FEM4X2400CL
Manufacturer Item:
FEM4X2400CL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5X18L0AA
Manufacturer Item:
FHMA5X18L0AA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
Item#:
FHMA5B60L0DA
Manufacturer Item:
FHMA5B60L0DA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Item#:
FEM4P1800AL
Manufacturer Item:
FEM4P1800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS