Air Handler Heat Pump 15 Ton 460/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

Item#:

FHS180LAAA2AUA

Manufacturer Item:

FHS180LAAA2AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHS180LAAA2AUA_Spec

Air Handler Multi-Position 2.5 Ton ECM R454B TXV 21" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

Item#:

FHMA5X30L0BA

Manufacturer Item:

FHMA5X30L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X30L0BA_Broc

Air Handler Multi-Position TXV3-1/2 Ton 208/230 R410A ECM Motor Installed Metering Device 42-11/16" H x 14-15/16" W x 22" D

Standard Features

Limited Warranty*

Multi-tap ECM (electronic commutating motor) motors - all sizes

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Cabinet construction features innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units

Horizontal hanging provisions on cabinet

No tools required to access filter

Newly improved filter rack area filter door insulation added for improved air seal

3- through 30-kW accessory heaters - field installed

Factory-supplied power plug

Easy plug-in provisions for heater installation

Entry options for high and low voltage wiring hook-up

Leak-preventing sweat connections

Thermostatic expansion valve, TXV, on all sizes

Designed for manufactured housing applications

Item#:

FJMA4B42L0CB

Manufacturer Item:

FJMA4B42L0CB

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FJMA4B42L0CB_Spec

Air Handler Heat Pump 20 Ton 575/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 89 W x 283/16 L