Home  > FUJITSU(x)
|◀ 313 - 324 of 1088 ▶|
View:
  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    Fujitsu FHRNPS2417SJZTNA

  • Item#:
    FHRNPS2417SJZTNA
    Manufacturer Item:
    FHRNPS2417SJZTNA
    Manufacturer:
    FUJITSU
  • Features
  • 92% residential gas furnace CSA certified
  • 4 way multi-poise design
  • 7-Segment LED all units
  • Direct Spark Ignition for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up
  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    Fujitsu FF100215TS92M

  • Item#:
    FF100215TS92M
    Manufacturer Item:
    FF100215TS92M
    Manufacturer:
    FUJITSU
  • Fujitsu® Indoor Furnace cased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW]
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing
  • Coils are tested at the factory with an extensive refrigerant leak check
  • Coils have copper sweat refrigerant connections
  • Feature two sets of 3/4" [19.1 mm] N.P.T. Condensate drain connections for ease of connection
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only)
  • Approved for system application with variety of Fujitsu outdoor units
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right
  • Unique drain pan design maximizes application flexibility and condensate removal
  • N-Coil design maximizes performance and minimizes height required at installation
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units

    FCCN3717SZTA

  • Item#:
    FCCN3717SZTA
    Manufacturer Item:
    FCCN3717SZTA
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Insulated blower compartment
  • Constant Torque electrically commutated motor


    FUJITSU FF100215TS80D

  • Item#:
    FF100215TS80D
    Manufacturer Item:
    FF100215TS80D
    Manufacturer:
    FUJITSU
  • Features and Benefits
  • Energy Efficiency: ENERGY STAR certified, featuring 97% AFUE across all model sizes
  • Diagnostics: Industry first, 7-Segment LED Display makes service calls quick and easy
  • Ignition System: Proven Direct Spark Ignition (DSI) for reliability and longevity
  • Water Management System: Exclusive patented block drain sensor that automatically shuts off the furnace when the drain is blocked and alerts the contractor via diagnostic code
  • Modulating Heating Stage: Gradual auto-adjustment from low to 100% of capacity to meet precise comfort requirements
  • Constant CFM Motor: Truly variable speed technology allows for ultimate humidity control, quieter sounds levels and year-round energy savings
  • Quietest Operation1: A fully insulated blower cabinet, solid bottom and truly variable speed airflow technology makes this furnace of the quietest available
  • EcoNet Enabled Furnace: The latest in sensor technology and the EcoNet monitoring system provides a new level of protection, control and energy savings
  • Allows on-the-go control and receipt of system alerts by the homeowner via the EcoNet Smart Thermostat and EcoNet App2

    FF97MV511524DHSGAAP

  • Item#:
    FF97MV511524DHSGAAP
    Manufacturer Item:
    FF97MV511524DHSGAAP
    Manufacturer:
    FUJITSU
  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FUJITSU FHRNPS3017SAZTNA

  • Item#:
    FHRNPS3017SAZTNA
    Manufacturer Item:
    FHRNPS3017SAZTNA
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34" cabinet ideal for space constrained installations
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Insulated blower compartment
  • Constant Torque electrically commutated motor

  • Item#:
    FF75173TS80DB
    Manufacturer Item:
    FF75173TS80DB
    Manufacturer:
    FUJITSU
  • Features
  • 92% residential gas furnace CSA certified
  • 4 way multi-poise design
  • 7-Segment LED all units
  • Direct Spark Ignition for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up
  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193


    FF40173PS92M

  • Item#:
    FF40173PS92M
    Manufacturer Item:
    FF40173PS92M
    Manufacturer:
    FUJITSU
    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.
  • Item#:
    FCC6024TSA
    Manufacturer Item:
    FCC6024TSA
    Manufacturer:
    FUJITSU
  • 95% AFUE
  • Multi-Position
  • 40,60,70,85,100,115 MBH
  • Constant Torque Blower
  • 1-Stage Gas Valve
  • Direct Spark Ignition
  • Aluminized Steel Heat Exchanger
  • Base Panel & Cabinet Insulation NOT Included
  • Std. LoNOx Compliant
  • 10-Year Warranty (With Registration)

    Fujitsu FF95ST304017M4SNAAS

  • Item#:
    FF95ST304017M4SNAAS
    Manufacturer Item:
    FF95ST304017M4SNAAS
    Manufacturer:
    FUJITSU
  • Features
  • 80% residential Gas Furnace CSA certified
  • 3 way multi poise design UF / HZ
  • PlusOne Diagnostics  7 Segment LED all units
  • PlusOne Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Solid doors provide quiet operation
  • Low profile 34" cabinet ideal for space constrained installations
  • Blower shelf design  serviceable in all furnace orientations
  • Hemmed edges on cabinets and doors
  • 1/4 turn door knobs for tool less access
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193
    Fujitsu FF75214CS80M

    Fujitsu FF75214CS80M

  • Item#:
    FF75214CS80M
    Manufacturer Item:
    FF75214CS80M
    Manufacturer:
    FUJITSU
    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    FCCN4821SZEA

  • Item#:
    FCCN4821SZEA
    Manufacturer Item:
    FCCN4821SZEA
    Manufacturer:
    FUJITSU
    |◀ 313 - 324 of 1088 ▶|
    View: