Home  > FUJITSU(x)
|◀ ◀ 301 - 312 of 1137 ▶ ▶|
View:

Fujitsu Gas Furnace 100,000 BTU AFUE 80% Multipoise Width 21.0" Non-Communicating One Stage>>LIMITED STOCK CLEARANCE ITEM<<

  • Features
  • 80% residential Gas Furnace CSA certified
  • 3 way multi poise design UF / HZ
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Solid doors provide quiet operation
  • Solid bottom
  • Insulated blower compartment
  • Low profile 34" cabinet ideal for space constrained installations
  • Blower shelf design  serviceable in all furnace orientations
  • Hemmed edges on cabinets and doors
  • 1/4 turn door knobs for tool less access
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193
    Fujitsu FF100215TS80M

    Fujitsu FF100215TS80M

    • Item#:
    FF100215TS80M
    Manufacturer Item:
    FF100215TS80M
    Manufacturer:
    FUJITSU
     
    FF100215TS80M_Broc
    FF100215TS80M_Spec
    FF100215TS80M Product Video

    Fujitsu Gas Furnace 85,000 BTU AFUE 95% Multipoise Width 21.0" Non-Communicating One Stage

    Fujitsu FF85215TS95M 1-Stage Constant Torque ECM Multipoise 5-Speed Gas,

    FF85215TS95M

    Item#:
    FF85215TS95M
    Manufacturer Item:
    FF85215TS95M
    Manufacturer:
    FUJITSU
     
    FF85215TS95M_Broc
    FF85215TS95M_Spec
    FF85215TS95M Product Video

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT2421SJZTNAB10

    • Item#:
    FHFSTT2421SJZTNAB10
    Manufacturer Item:
    FHFSTT2421SJZTNAB10
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB10_Spec

    Air Handler 3 Ton 2-Stage Constant Torque R410A 21" W x 50-1/2" x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections
  • Air handlers are 230/1 Volts

    FUJITSU FHSMTT3621SAZTNAN00

    • Item#:
    FHSMTT3621SAZTNAN00
    Manufacturer Item:
    FHSMTT3621SAZTNAN00
    Manufacturer:
    FUJITSU
     
    FHSMTT3621SAZTNAN00_Spec

    Evaporator Coil Cased 3 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    FCCN3621SZEA

    • Item#:
    FCCN3621SZEA
    Manufacturer Item:
    FCCN3621SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Air Handler 3 Ton Multi-Position Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper Stub braze connections
  • Air handlers are 230/1 Volts

    Fujitsu FHRNTT3617SJZTNA

    • Item#:
    FHRNTT3617SJZTNA
    Manufacturer Item:
    FHRNTT3617SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SJZTNA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT2421SJZTNAB05

    • Item#:
    FHFSTT2421SJZTNAB05
    Manufacturer Item:
    FHFSTT2421SJZTNAB05
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB05_Spec

    Air Handler 3 Ton Multi Position 120/1 PSC Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FUJITSU FHRNTT3617SAZTNA

    • Item#:
    FHRNTT3617SAZTNA
    Manufacturer Item:
    FHRNTT3617SAZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SAZTNA_Spec

    Air Handler 2 Ton 2-Stage ECM Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT2421SJZTNAB08

    • Item#:
    FHFSTT2421SJZTNAB08
    Manufacturer Item:
    FHFSTT2421SJZTNAB08
    Manufacturer:
    FUJITSU
     
    FHFSTT2421SJZTNAB08_Spec

    Fujitsu Gas Furnace 75,000 BTU AFUE 80% Multipoise Width 21.0" Non-Communicating One Stage

  • Features
  • 80% residential Gas Furnace CSA certified
  • 3 way multi poise design UF / HZ
  • Diagnostics  7 Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Heat exchanger is removable for improved serviceability. Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
  • Solid doors provide quiet operation
  • Solid bottom
  • Insulated blower compartment
  • Low profile 34" cabinet ideal for space constrained installations
  • Blower shelf design  serviceable in all furnace orientations
  • Hemmed edges on cabinets and doors
  • 1/4 turn door knobs for tool less access
  • Integrated Control board features dip switches for easy system set up
  • QR code for quick access to product information from your smart phone or tablet
  • Constant Torque electrically commutated motor
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193


    FF75214TS80M

    • Item#:
    FF75214TS80M
    Manufacturer Item:
    FF75214TS80M
    Manufacturer:
    FUJITSU
     
    FF75214TS80M_Broc
    FF75214TS80M_Spec
    FF75214TS80M Product Video

    Evaporator Coil Cased 4 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    FCCN4824SZEA

    • Item#:
    FCCN4824SZEA
    Manufacturer Item:
    FCCN4824SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Fujitsu Gas Furnace 60,000 BTU AFUE 95% Multipoise Width 17.0" Non-Communicating One Stage

  • Features
  • 95% residential gas furnace CSA certified
  • 4 way multi-poise design
  • 7-Segment LED all units
  • Ignition System  Direct Spark Ignition for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Constant Torque electrically commutated motor
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up

  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193

    Fujitsu FF60173TS95M

    Fujitsu FF60173TS95M

    • Item#:
    FF60173TS95M
    Manufacturer Item:
    FF60173TS95M
    Manufacturer:
    FUJITSU
     
    FF60173TS95M_Broc
    FF60173TS95M_Spec
    FF60173TS95M Product Video
    |◀ ◀ 301 - 312 of 1137 ▶ ▶|
    View: