Sid Harvey Remanufactured R80-30R

• Immersion type aquastat controller and oil burner primary control provides high limit and low limit/circulator control for oil-fired hydronic heating systems
• Use in intermittent ignition applications
• Capable of zone control with zone valves
• Circulator zone control with ZC and ZR terminals on R8182D, E, H, J
• 8-flame failure during the running cycle results in a 45 sec attempt to restart
• If unsuccessful, safety shutoff occurs, requiring manual reset before burner can be restarted
• C554A cadmium sulfide flame detector and a 24 VAC thermostat required
• Includes auxiliary ZC and ZR terminals may be used to provide circulator zone control through an R845A switching relay, horizontal case
• Maximum 250 deg F at element, 15 deg F fixed high limit differential temperature
• 45 sec safety switch timing
• 1/2"-14 NPT well spud size
• 0.2 amp anticipator setting
• 1-1/2" insulation depth,
  ,
  

  Sid Harvey Remanufactured R80-58R

Skuttle L26-24

Sid Harvey Remanufactured R75-58R

• Remanufactured with 100% pure, solid silver pyrostat contacts for longer on-the-job service life
• Backed by 2-year warranty
• All new stack relays contain brass contacts covered with a slight silver plating, it wears off as the contacts open and close, exposing the brass surface over time, the exposed surface is a poor conductor and may result in relay failure and nuisance callbacksSid Harvey Item #:R5R: Replaces Part #:'s : 0R541R,
  ,
  

  Sid Harvey Remanufactured R5R

• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout Remote lockout indication
• Enclosed safety switch with External reset butTon
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• With 30 sec safety timing, alarm outputs and manual safety switch

Sid Harvey Remanufactured R75-42R

Sid Harvey Remanufactured R75-41R

• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with External reset butTon
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• With 15 sec safety timing, alarm outputs and manual safety switch

Sid Harvey Remanufactured R75-40R

Resideo Braukmann AMU200-RP

• Designed to be directly installed on water heater hot outlet port
• Offers constant water temperature under changing operating conditions
• Temperature is adjustable using 3/16 allen wrench and if cold water supply is interrupted, flow reduction occurs in seconds
• Heat trapping not required and recirculation portion option allows for fast response
• Dramatically reduces installation time and cuts number of parts in half
• Easy recirculation integrated port allows for optional recirculation connection
• DirectConnect to water heater NPT bottom connection attaches easily
• Teflon coating increases product life and reduces callbacks
• Free thermostrip included to make temperature setting easy for one person to handle
• Less than 0.25% low lead content by weighted average
• Minimum temperature difference between hot and mix should be 10 deg F
• Includes check valves on hot and cold port
• Includes 3/4" NPT bottom connection

Resideo Braukmann AMX101-US-1LF

• Temperature is adjustable using push-twist-release locking hand wheel design and if cold water supply is interrupted, flow reduction occurs in seconds
• Recirculation portion option offers fast delivery of heated water to the furthest fixtures, increasing user comfort with more available hot water
• The alternate hot port bypasses hot water directly from the tank to non-mixed temperature applications
• Easy installation on water heaters saves time and money
• Commonly used for scalding protection
• Teflon coating extends service life
• Free thermostrip included to make temperature setting easy for one person to handle
• Less than 0.25% low lead content by weighted average
• Includes mixing valve, cold water tee fitting and 8" Flexible stainless steel connector
• Teflon coated brass shuttle, EPDM O-ring
• Minimum temperature difference between hot and mix should be 27 deg F
• 1/2" NPT recirculation and alternate hot port

Resideo Braukmann AMX300TLF

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed to increase the amount of usable hot water
• Tamper resistant design with nickel plated brass construction and EPDM o-rings
• Designed for easy maintenance and teflon coating prevents mineral build-up and extends life
• Lockable hand wheel for accurate temperature control
• Straight through wiring (hot and cold at same level)
• Free thermostrip included to make temperature setting easy for one person to handle
• Teflon coated brass shuttle, EPDM rubber O-ring
• Includes check valves on hot and cold port
• 1 year limited warranty

Resideo Braukmann AM101R-US-1