|◀ 5173 - 5184 of 5928 ▶|
View:
Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
  • 42K BTU 3-1/2 Ton
  • 208/230/1 VA
  • 21" Wide
  • PSC Motor
  • Multi-Position,




    FUJITSU FH4221TPSJSN

Item#:
FH4221TPSJSN
Manufacturer Item:
FH4221TPSJSN
Manufacturer:
FUJITSU
  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FHRATT4821SAZTNA

  • Item#:
    FHRATT4821SAZTNA
    Manufacturer Item:
    FHRATT4821SAZTNA
    Manufacturer:
    FUJITSU
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X6000AL

  • Item#:
    FXM4X6000AL
    Manufacturer Item:
    FXM4X6000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • ComStar International Inc. manufactures the most comprehensive product line of environmentally safe, industrial strength chemical products for trade professionals
    For over 50 years, ComStar has been a leader in developing, manufacturing and marketing over 360 proprietary products designed specifically for a breadth of applications used worldwide in the HVACR, plumbing, commercial and industrial maintenance industries
    ComStar is proud to be a business that uses smart-g rowth strategies and consistently employs talented individuals and strategic partners.
    Industrial Petrolic Corporation (IPC) was formed in New York in 1970 as a manufacturer and distributor of specialty chemical products for professionals in the heati and plumbing industries
  • In 1990, a group of investors founded ComStar to acquire IPC and expand the product line from 100 to over 360 products. Comstar diversified its offerings not only to the HVACR (heating, ventilation, air conditioning and refrigeration) industries, but also the hospitality, train, automo- tive, indoor air quality, precision parts and building maintenance industries

    Comstar F1-72

    Comstar F1-72

  • Item#:
    F1-72
    Manufacturer Item:
    SH20-3510
    Manufacturer:
    UTILITY ENTERPRISES
  • ComStar International Inc. manufactures the most comprehensive product line of environmentally safe, industrial strength chemical products for trade professionals
    For over 50 years, ComStar has been a leader in developing, manufacturing and marketing over 360 proprietary products designed specifically for a breadth of applications used worldwide in the HVACR, plumbing, commercial and industrial maintenance industries
    ComStar is proud to be a business that uses smart-g rowth strategies and consistently employs talented individuals and strategic partners.
    Industrial Petrolic Corporation (IPC) was formed in New York in 1970 as a manufacturer and distributor of specialty chemical products for professionals in the heati and plumbing industries
  • In 1990, a group of investors founded ComStar to acquire IPC and expand the product line from 100 to over 360 products. Comstar diversified its offerings not only to the HVACR (heating, ventilation, air conditioning and refrigeration) industries, but also the hospitality, train, automo- tive, indoor air quality, precision parts and building maintenance industries

    Comstar F1-70

    Comstar F1-70

  • Item#:
    F1-70
    Manufacturer Item:
    F1-70
    Manufacturer:
    SID HARVEY INDUSTRIES INC.
    Dry deodorant absorbent for cleaning up unexpected accidents where wet mopping is inconvenient. The granules soak up liquid spills with rapid, blotting action, while a powerful deodorant neutralizes offensive odors. Especially effective for classrooms, hospitals, nursing homes, small animal clinics, and kennels. Provides excellent odor control for refuse and garbage containers. Safe for use on composition floors. Low order of toxicity. USDA applicable.,
    ,



    F1-80


    F1-80

    Item#:
    F1-80
    Manufacturer Item:
    315115
    Manufacturer:
    SEALED UNIT PARTS CO, INC
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X4200AL

  • Item#:
    FXM4X4200AL
    Manufacturer Item:
    FXM4X4200AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Bosch Heating Parts FT4 Hood Termination W/V 4"

    Bosch Heating Parts FT4

    Item#:
    FT4
    Manufacturer Item:
    46483400
    Manufacturer:
    FIELD CONTROLS LLC
    Empire Comforts FRBC Battery Operated Remore Control for Use with,

    FRBC

    Item#:
    FRBC
    Manufacturer Item:
    FRBC
    Manufacturer:
    EMPIRE COMFORT SYSTEMS, INC.
    Therma Flow Parts GASKET-ECT Peerless ECT Gasket,

    GASKET-ECT

    Item#:
    GASKET-ECT
    Manufacturer Item:
    GASKET-ECT
    Manufacturer:
    THERMA-FLOW, INC.
    Therma Flow Parts GASKET-GO Flame Rod Assembly EC200/EC200,

    GASKET-GO

    Item#:
    GASKET-GO
    Manufacturer Item:
    GASKET-GO
    Manufacturer:
    THERMA-FLOW, INC.
    Carrier Heating Parts HH18HA452 Limit Switch 3" 250 Degrees SPST Manual Reset

    HH18HA452

    Item#:
    HH18HA452
    Manufacturer Item:
    HH18HA452
    Manufacturer:
    CARRIER NORTHEAST
    |◀ 5173 - 5184 of 5928 ▶|
    View: