|◀ ◀ 5137 - 5148 of 5942 ▶ ▶|
View:

Air Handler 7-1/2 Ton 460/3 R454B

International Comfort Products FAL091H2AA0AUA

Item#:
FAL091H2AA0AUA
Manufacturer Item:
FAL091H2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Air Handler Multi Position 2 Ton 230/208 VAC R454B 42-11/16" H x 17-5/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

    International Comfort Products FCMA5X24L0BA

    • Item#:
    FCMA5X24L0BA
    Manufacturer Item:
    FCMA5X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5X24L0BA_Broc

    Flow Meter

    Dunkirk Heating Parts FE3980C360 Flow Meter

    Dunkirk Heating Parts FE3980C360

    Item#:
    FE3980C360
    Manufacturer Item:
    FE3980C360
    Manufacturer:
    ECR INTERNATIONAL /ARGO IND

    The Old Swicharoo

    E.S.P. Company FF75 The Old Swicharoo,
    ESP Company FF75

    ESP Company FF75

    Item#:
    FF75
    Manufacturer Item:
    FF75
    Manufacturer:
    ESP COMPANY

    Air Handler Multi-Position 4 Ton 208/230 1400 CFM R454B 53-7/16" H x 21-1/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

    International Comfort Products FCMA5B48L0CA

    • Item#:
    FCMA5B48L0CA
    Manufacturer Item:
    FCMA5B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5B48L0CA_Broc

    Air Handler Multi-Position 3 Ton 208/230 1225 CFM R454B 53-7/16" H x 21-1/8" W x 22-1/16" D

  • Communicating variable-speed fan blower that can quietly deliver more even levels of temperature and enhanced humidity control
  • Uses R-454B refrigerant which our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-oz.one depleting properties of our previous refrigerant.
  • Includes factory-installed refrigerant leak dissipation systems to meet new UL requirements and to show our commitment to safety
  • Efficiency-optimizing Thermostatic Expansion Valve (TXV)
  • Compatible with two-stage outdoor units
  • Enhanced heat pump heating comfort with higher temperature delivery
  • Corrosion-resistant all-aluminum coil
  • Convenient washable filter
  • Air purifier and dehumidifier compatible
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacteria buildu

    International Comfort Products FCMA5B36L0CA

    • Item#:
    FCMA5B36L0CA
    Manufacturer Item:
    FCMA5B36L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCMA5B36L0CA_Broc

    AIR HANDLER,4T, 1 STAGE PSC R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FUJITSU FHRNPS4221SJZTNA

    • Item#:
    FHRNPS4221SJZTNA
    Manufacturer Item:
    FHRNPS4221SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNPS4221SJZTNA_Broc

    AIR HANDLER,3T MULTI POS 115V CT MOTOR TXV

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FUJITSU FHRNTT3617SAZTNA

    • Item#:
    FHRNTT3617SAZTNA
    Manufacturer Item:
    FHRNTT3617SAZTNA
    Manufacturer:
    FUJITSU
     
    FHRNTT3617SAZTNA_Spec

    Air Handler Multi-Position 3 Ton ECM R454B TXV 17" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X36L0BA

    • Item#:
    FHMA5X36L0BA
    Manufacturer Item:
    FHMA5X36L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X36L0BA_Broc

    Air Handler 3 Ton 36K BTU Horizontal ECM Motor TXV R410A 10-1/4" H x 49-1/4" W x 26-3/8" D

    Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number

    International Comfort Products FMC4Z3600AL

    • Item#:
    FMC4Z3600AL
    Manufacturer Item:
    FMC4Z3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMC4X-FMC4Z-ICP_Install

    Air Handler Multi-Position 3.5 Ton ECM R454B TXV 21" Modulating

    STANDARD FEATURES
  • Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes.
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
  • Five available speed tags to meet a wide range of applications.
  • Large, grooved tube, louvered fin coils.
  • Efficient, quiet, time-tested blower housings and diffusers.
  • Sturdy, drainable condensate pans.
  • Construction innovations designed to prevent cabinet sweating.
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
  • Super-thick R-4.2 insulation with vapor barrier.
  • Pre-painted galvanized steel cabinet (dark grey).
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations..
  • Horizontal hanging provisions on cabinet.
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter.
  • 3 through 30 kW accessory heaters - field installed.
  • Easy plug-in provisions for heater installation.
  • Entry options for high and low voltage wiring hook-up.
  • Leak-preventing sweat connections.
  • Factory installed thermostatic expansion valve, TXV, on all coils.
  • Designed for manufactured housing applications
    • Item#:
    FHMA5B42L0CA
    Manufacturer Item:
    FHMA5B42L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5B42L0CA
    FHMA5B42L0CA_Broc

    Air Handler Multi-Position 2 Ton ECM R454B TXV 21" Singlar

    Refrigerant leak detection dissipation system for added safety
  • Multi-tap ECM (electronic commutating motor) motors  all sizes
  • Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
  • Five available speed tags to meet a wide range of applications
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Construction innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Pre-painted galvanized steel cabinet
  • Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
  • Horizontal hanging provisions on cabinet
  • Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
  • Easy plug-in provisions for heater installation
  • Factory installed thermostatic expansion valve, TXV, on all coils
  • Designed for manufactured housing applications

    FHMA5X24L0BA

    • Item#:
    FHMA5X24L0BA
    Manufacturer Item:
    FHMA5X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FHMA5X24L0BA_Broc
    |◀ ◀ 5137 - 5148 of 5942 ▶ ▶|
    View: