|◀ 4765 - 4776 of 5942 ▶|
View:
FEATURES:
Smart Diagnostics
  • Self configuring (ease of installation)
  • Easier troubleshooting, providing faster service and repair
  • Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)
  • Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
    Technology
  • R-410A refrigerant chlorine-free, non-ozone depleting
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

    International Comfort Products FCMB4B60L0DA

  • Item#:
    FCMB4B60L0DA
    Manufacturer Item:
    FCMB4B60L0DA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    FEATURES:
    Smart Diagnostics
  • Self configuring (ease of installation)
  • Easier troubleshooting, providing faster service and repair
  • Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)
  • Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
    Technology
  • R-410A refrigerant chlorine-free, non-ozone depleting
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

    International Comfort Products FCMB4X24L0BA

  • Item#:
    FCMB4X24L0BA
    Manufacturer Item:
    FCMB4X24L0BA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX091L2AA0AUA

  • Item#:
    FAX091L2AA0AUA
    Manufacturer Item:
    FAX091L2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    FEATURES:
    Smart Diagnostics
  • Self configuring (ease of installation)
  • Easier troubleshooting, providing faster service and repair
  • Energy Tracking capability with the Ion Wall Control. (Energy Tracking has the ability to monitor and estimate the energy consumption of your Ion system.)
  • Compatibility with wall control depends on software version. Check the installation instructions for minimum requirements. Environmentally Responsible Refrigerant
    Technology
  • R-410A refrigerant chlorine-free, non-ozone depleting
  • Thermostatic Expansion Valve (TXV) designed to maximize performance with R-410A refrigerant. Bi-flow hard-shutoff with mechanical fittings

    International Comfort Products FCMB4B48L0CA

  • Item#:
    FCMB4B48L0CA
    Manufacturer Item:
    FCMB4B48L0CA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P1800AL

  • Item#:
    FEM4P1800AL
    Manufacturer Item:
    FEM4P1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FAX120H2AA0AUA

  • Item#:
    FAX120H2AA0AUA
    Manufacturer Item:
    FAX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
    The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
    • 48K BTU 4 Ton
    • 115/1 VAC
    • 21" Wide
    • PSC Motor
    • Multi-Position,
      ,

      Fujitsu FH4821TPSJSN

    Item#:
    FH4821TPSJSN
    Manufacturer Item:
    FH4821TPSJSN
    Manufacturer:
    FUJITSU
  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections
  • Air handlers are 230/1 Volts

    Fujitsu FHRNPS4821SJZTNA

  • Item#:
    FHRNPS4821SJZTNA
    Manufacturer Item:
    FHRNPS4821SJZTNA
    Manufacturer:
    FUJITSU
  • Multiposition design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wide range of applications than competitive package air handler lines
  • Economizer accessory provides ventilations air and free cooling
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers
  • Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes
  • Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes
  • High efficiency copper tube / aluminum coils
  • Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance  removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24volt terminal block for control wiring connection.
  • Hot water coil, steam coil, and electric heat accessories are available.

    International Comfort Products FHS240HAAA2AUA

  • Item#:
    FHS240HAAA2AUA
    Manufacturer Item:
    FHS240HAAA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections
  • Air handlers are 230/1 Volts

    Fujitsu FHSMTT3621SAZTNAN00

  • Item#:
    FHSMTT3621SAZTNAN00
    Manufacturer Item:
    FHSMTT3621SAZTNAN00
    Manufacturer:
    FUJITSU
  • Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits
  • Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics
  • Coil design provides low air pressure drop, high performance, and extremely compact size
  • Less than 2% cabinet air leakage in accordance with ASHRAE standard 193
  • Field-installed electric heat kits from 5 kw  25 kw
  • Slide-out blower with ECM motor
  • R-410A TXV factory installed for heat pump or air conditioner
  • 4 leg blower motor mount
  • Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections
  • Air handlers are 230/1 Volts

    Fujitsu FHRNTT3617SJZTNA

  • Item#:
    FHRNTT3617SJZTNA
    Manufacturer Item:
    FHRNTT3617SJZTNA
    Manufacturer:
    FUJITSU
  • Multi-position design for horizontal or vertical installation without modification.
  • Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.
  • High-static design meets a wider range of applications than competitive packaged air handler lines.
  • Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
  • Cooling coils with mechanically bonded fins provide peak heat transfer.
  • Hot water coil, steam coil, and electric heat accessories are available.
  • Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Standard 2-Speed Indoor Fan Motor system.

    International Comfort Products FHX120H2AA0AUA

  • Item#:
    FHX120H2AA0AUA
    Manufacturer Item:
    FHX120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 4765 - 4776 of 5942 ▶|
    View: