Field Controls SWGII-5S Power Venter 5" 115 VAC 3k RPM 290k Btu Stainless Steel,

Field Controls SWGII-5S

,

SWGII-5S

Field Controls SWGII-6 Power Venter 6" 115 VAC,

Field Controls SWGII-6

,

SWGII-6

Watts Water 1156F-P Reducing Valve 1/2" FPT,

1156F-P

,

1156F-P

Riello 7001081 Electronic Air Shutter Retrofit Kit for F3 Burner

,

Riello Parts 7001081

,

7001081

Tjernlund HSJ Aluminized Steel Housing and Blower Wheel Side Wall Power Venter, 4 Inch, 115 VAC , 3000 RPM , 125000 BTU/hr

• UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs
• Built-in adjustable damper also allows regulation for maximum combustion efficiency
• Interlocks with any 24/120 VAC burner circuit
• UC1 universal control features adjustable pre/post-purge, LED status indicators, and fault code memory
• Thermal protection, sintered iron sleeve type bearing
• UC1 interlock control, fan proving switch, adjustable damper, vibration isolators included

Sid Harvey Item #:HS-J: Replaces Part #:'s : X89-438,

Tjernlund HS-J

,

HS-J

Tjernlund HS2 Aluminized Steel Housing and Blower Wheel Side Wall Power Venter, 6", 115 VAC , 3300 RPM , 600000 BTU

• UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs
• Built-in adjustable damper also allows regulation for maximum combustion efficiency
• Interlocks with any 24/120 VAC burner circuit
• UC1 universal control features adjustable pre/post-purge, LED status indicators, and fault code memory
• Thermal protection, sintered iron sleeve type bearing
• UC1 interlock control, fan proving switch, adjustable damper, vibration isolators included

Sid Harvey Item #:HS2: Replaces Part #:'s : 30933,

Tjernlund HS2

,

HS2

Tjernlund HS1 Steel Side Wall Power Venter with UC1 Control, 115 VAC at 60 Used for side wall venting residential/light commercial natural gas, LP or oil fired equipment including: Furnaces, boilers, water heaters and unit heaters. All models feature the new UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs. Built-in adjustable damper also allows regulation for maximum combustion efficiency. UC1 universal control features include, adjustable pre and post-purge settings, LED status/diagnostic indicators, fan prover switch monitoring. Interlocks with any 24 - 120 VAC burner control circuit and also includes dry contact actuation option. Easily interlock multiple appliances with our MAC-series multiple appliance controls.Sid Harvey Item #:HS1: Replaces Part #:'s : 21767,

Tjernlund HS1

,

HS1

The SideShot models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system. Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas. Factory wired safety and operating controls allow simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations. Ultra-fine draft adjustment and slide-out access to all internal components. Easy multiple appliance interlocks with our MAC Series multiple appliance controls.

• Use to side wall vent non-condensing oil fired boilers, water heaters and furnaces that otherwise would require a conventional roof top terminated chimney
• Built-in interlock control with redundant high limit safety switch interfaces easily with thermostat, aquastat or primary controls
• Adjustable pre and post purge timing and easy fault code retrieval
• Stainless steel construction in all critical components including outdoor terminus
• Patented design jets flue gases away from the outside wall to eliminate potential staining of siding
• Slide out service drawer and material handling stainless steel impeller

Sid Harvey Item #:SS2: Replaces Part #:'s : 6H167A,

Tjernlund SS2

,

SS2

The SideShot models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system. Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas. Factory wired safety and operating controls allow simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations. Ultra-fine draft adjustment and slide-out access to all internal components. Easy multiple appliance interlocks with our MAC Series multiple appliance controls.

• Use to side wall vent non-condensing oil fired boilers, water heaters and furnaces that otherwise would require a conventional roof top terminated chimney
• Built-in interlock control with redundant high limit safety switch interfaces easily with thermostat, aquastat or primary controls
• Adjustable pre and post purge timing and easy fault code retrieval
• Stainless steel construction in all critical components including outdoor terminus
• Patented design jets flue gases away from the outside wall to eliminate potential staining of siding

Sid Harvey Item #:106-10: Replaces Part #:'s : 6H167,

Tjernlund 106-10

,

106-10

Duro Dyne Rapit 8086 Steel Damper Regulator

• An inexpensive, rattle-free regulator for quick installation on balance or splitter dampers
• It is formed from rust-resistant, heavy gauge, Galvanized steel and installs in seconds
• The rapit will penetrate and secure to round or rectangular damper blades up to 24 ga steel
• It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position

Sid Harvey Item #:RS156: Replaces Part #:'s : 5769

Field Controls 46235000 Stainless Steel Universal Replacement Motor Assembly, 6"

• Field Controls 46235000 Stainless Steel Universal Replacement Motor Assembly, 6",
  
  

  Tjernlund SWGII-6RMK

  ,
  

  SWGII-6RMK

Weil-Mclain Heating Parts 381800475 Vent Damper 5"

,



Weil-Mclain Heating Parts 381800475

,


381800475