Field Controls CAS-2B-90E Combustion Air Boot Beckett,
,

Field Controls CAS-2B-90E

Field Controls CAS-2B Combustion Air System for Beckett AFG/AF, Carlin EZ-1, CRD FRD, Wayne MSR Oil Burners, Upto 2 GPH

Sid Harvey Item #:CAS-2B: Replaces Part #:'s : x89-861,
,

Field Controls CAS-2B

Field Controls CAS-4JR Fan-In-a-Can Gas System 24 VAC,
,

Field Controls CAS-4JR

Field Controls CAS-1 Combustion Air System for Beckett AFFI, Nx, Riello 40BF Oil Burners, Upto 2 GPH

Sid Harvey Item #:CAS-1: Replaces Part #:'s : 5G3200,
,

Field Controls CAS-1

Field Controls CAS-34U Fan-In-a-Can Gas System 120 VAC Universal Gas/Oil

Field Controls CAS-34U

Field Controls 46139943 Control Kit with Adjustable Post Purge and Draft Control for SWG Power Venter, 24 VAC

,
,

Field Controls CK-43

Field Controls CK-63 Control Kit for SWG Series Power Vent Hoods for Controlling Oil-fired Heating Appliances

• Control the operation of SWG/CV power venter
• Draft proving switch and secondary safety switch
• Adjustable electronic post-purge
• Includes mounted pressure switch and solid state post-purge control, (1) 2 feet length of 1/4" aluminum tubing, (1) 1/4" tubing connector, (1) Flexible conduit connector, (1) WMO-1 secondary safety switch

Sid Harvey Item #:CK-63: Replaces Part #:'s : x71-291,
,

Field Controls CK-63

Field Controls CV-4 Combustion Air Combined Power Venter 4" 120 VAC

Field Controls CV-4

Field Controls DI-1 Draft Inducer Blower, 115 VAC , 0.43 amp, 1550 RPM

• Field draft inducers solve the drafting problems caused by short chimneys, undersized vent pipes and negative building pressures
• Draft Inducers are designed for easy installation in a wide variety of applications, including oil or gas-fired furnaces, water heaters and boilers
• For venting single or multiple appliances, use a control kit

,
,

Field Controls DI-1

Field Controls DI-3 Draft Inducer Motor 115V 1725 RPM 8"-12" Pipe,
,

Field Controls DI-3

Field Controls (GVD) gas vent damper was developed to reduce off cycle venting losses through boilers and draft hoods. When the boiler is in a standby mode, heat escapes up the chimney. The heat comes from the boiler and the conditioned space. To significantly reduce these losses, install a Field Controls Gas Vent Damper. The damper is installed in the vent as close to the draft hood as practical. When properly installed, the damper opens before the burner fires, and closes after the burner shuts off. The electrical circuits in this product are designed not to override the existing limit and safety controls of the boiler.

• Operates with all 24 VAC , 60 Hz intermittent ignition and standing pilot ignition systems
• Stainless steel construction provides superior corrosion resistance
• Damper operation - power opens in 15 sec, power closes in 15 sec, power is off at damper motor when it is at rest
• Hold open switch allows damper to be placed in an open position and taken out of service to assist with trouble shooting appliance problems
• Keyed wiring harness connector plug installs only one way, preventing incorrect wiring connection
• Flex seal provides self cleaning action
  

  Field Controls GVD-7PL

Field Controls (GVD) gas vent damper was developed to reduce off cycle venting losses through boilers and draft hoods. When the boiler is in a standby mode, heat escapes up the chimney. The heat comes from the boiler and the conditioned space. To significantly reduce these losses, install a Field Controls Gas Vent Damper. The damper is installed in the vent as close to the draft hood as practical. When properly installed, the damper opens before the burner fires, and closes after the burner shuts off. The electrical circuits in this product are designed not to override the existing limit and safety controls of the boiler.

• Operates with all 24 VAC , 60 Hz intermittent ignition and standing pilot ignition systems
• Stainless steel construction provides superior corrosion resistance
• Damper operation - power opens in 15 sec, power closes in 15 sec, power is off at damper motor when it is at rest
• Hold open switch allows damper to be placed in an open position and taken out of service to assist with trouble shooting appliance problems
• Keyed wiring harness connector plug installs only one way, preventing incorrect wiring connection
• Flex seal provides self cleaning action

Sid Harvey Item #:GVD-6PL: Replaces Part #:'s : 40703,
,

Field Controls GVD-6PL