Resideo PV-001RP Replacement Air Vent Assembly,
,

Honeywell PV-001RP

Watts Water RA-1-SW-3/4 Bronze Radiator Gate Straight Valve 3/4" Threaded x Male Union,
,

Watts Water RA-1-SW-3/4

Watts Regulators series 1156F high capacity feed water pressure regulators are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1156F has high capacity performance and simplified servicing design.

• Tight seating check valve
• Purge lever for manual purging
• High capacity performance as well as unique simplified servicing accessibility for complete unitized maintenance
• Stainless steel strainer to protect the valve disc from fouling
• Designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times
• Provide make up water to the system in the event of system leaks
• 15 psi factory set, 100 psi maximum working pressure

,
,

Watts Water TB1156F

Spirotherm VDR100FT Spirocombi Air & Dirt Separator 1" FPT W/Magnet

Spirotherm VDR100FT

Field Controls VRV-4 Stainless Steel Vacuum Relief Valve 4",
,

Field Controls VRV-4

Spirotherm Spirotop VTP Brass Air Release Valve, 1/2", FPT, 150 psig

• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring

,
,

Spirotherm VTP050FT

Erie PopTop VS2213 Forged Brass 2-Way Steam High Temperature Zone Valve Erie's line of motorized hydronic valves, the PopTop, provides convenient, reliable, and easy installation for a variety of heating and cooling applications. The PopTop makes installation a snap with easy, one-handed removal or engagement of the actuator to the valve body.,
,

Erie VS3213

Watts regulators series 009 reduced pressure zone assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction 1/4 - 2" or FDA approved epoxy coated cast iron 2-1/2 - 3", 2 in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance.

• Single access cover and modular check construction for ease of maintenance
• Top entry - all internals immediately accessible
• Captured springs for safe maintenance
• Internal relief valve for reduced installation clearances
• Replaceable seats for economical repair
• Bronze body construction for durability
• Ball valve test cocks - screwdriver slotted
• Large body passages provides low pressure drop
• Compact, space saving design
• No special tools required for servicing
• 1/4-turn ball valve

  Watts Water 009-QT-FS-1/2

Danfoss 013G8044 Nickel-Plated Brass Straight Thermostatic Radiator Valve Body, 3/4", Solder Union

• Valve bodies are designed to meet the demands of the residential, commercial and industrial sectors
• Thermostatic radiator valves regulate the flow of hot water or low pressure steam through free-standing radiators, baseboards or convectors in hot water and 2-pipe steam systems
• Valves are fitted with a packing gland assembly that is replaceable while the system is in operation
• EPDM rubber valve disc provides a seal against the valve seat at differential pressures of up to 15 psig in hot water heating systems, while 15 psig for low pressure steam systems
• Manual plastic cap supplied to protect the valve pusHPin and provide manual control of the valve during installation
• Valves remain normally open with no operator mounted
• Brass bonnet, spindle, nickel-plated brass tailpiece, union nut, EPDM disc, packing O-ring, stainless steel spring

Sid Harvey Item #:013G8044: Replaces Part #:'s : 5847,
,

Danfoss 013G8044

Danfoss 013G8024 Nickel-Plated Brass Thermostatic Radiator Angle Valve, 1", FPT x MPT Union Tailpiece

• Thermostatic radiator valves regulate the flow of hot water or low pressure steam through free-standing radiators, baseboards or convectors in hot water and 2-pipe steam systems
• Valves are fitted with a packing gland assembly that is replaceable while the system is in operation
• EPDM rubber valve disc provides a seal against the valve seat at differential pressures of up to 15 psig in hot water heating systems, while 15 psig for low pressure steam systems
• Manual plastic cap supplied to protect the valve pusHPin and provide manual control of the valve during installation
• Valves remain normally open with no operator mounted
• Brass bonnet, spindle, nickel-plated tailpiece, union nut, EPDM disc, packing O-ring, stainless steel spring

Sid Harvey Item #:013G8024: Replaces Part #:'s : 5841
,
,

Danfoss 013G8024

Watts regulators series 009 reduced pressure zone assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction 1/4 - 2" or FDA approved epoxy coated cast iron 2-1/2 - 3", 2 in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance.

• Single access cover and modular check construction for ease of maintenance
• Top entry - all internals immediately accessible
• Captured springs for safe maintenance
• Internal relief valve for reduced installation clearances
• Replaceable seats for economical repair
• Bronze body construction for durability
• Ball valve test cocks - screwdriver slotted
• Large body passages provides low pressure drop
• Compact, space saving design
• No special tools required for servicing
• 1/4-turn ball valve

,
,

Watts Water 009QT-3/4

Watts regulators series 009 reduced pressure zone assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction 1/4 - 2" or FDA approved epoxy coated cast iron 2-1/2 - 3", 2 in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance.

• Single access cover and modular check construction for ease of maintenance
• Top entry - all internals immediately accessible
• Captured springs for safe maintenance
• Internal relief valve for reduced installation clearances
• Replaceable seats for economical repair
• Bronze body construction for durability
• Ball valve test cocks - screwdriver slotted
• Large body passages provides low pressure drop
• Compact, space saving design
• No special tools required for servicing
• 1/4-turn ball valve

,
,

Watts Water 009QT-1/2