|◀ 1537 - 1548 of 1659 ▶|
View:
Cash Acme VR-801 VAC uum relief valve is designed to protect hot water supply systems and pressure vessels against negative pressure. It is especially well suited for many domestic and commercial systems. It works by preventing internal VAC uum conditions that could result in burned out heaters and/or collapsed storage tanks. Installed on the cold water supply line, the Cash Acme VR-801 closes tightly under pressure and opens at a 1" mercury VAC uum. Atmosphere admitted to the system breaks the VAC uum, preventing collapse of the storage tank.,

Cash Acme VR801-34LF

Item#:
VR801-34LF
Manufacturer Item:
VR801-34LF
Manufacturer:
Cash Acme
Diversified Heat Transfer NCG-V1 Neoprene Coil Gasket, 1/4" Diameter

Diversified Heat Transfer NCG-V1

Item#:
NCG-V1
Manufacturer Item:
NCG-V1
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer NCG-PR Neoprene Coil Gasket, 1/4 Inch Dia.

Diversified Heat Transfer NCG-PF

Item#:
NCG-PF
Manufacturer Item:
NCG-PR
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
AS-MB-125 Microbubble Air Separator, 1-1/4", IPS, 150 psig, 240 deg F, 23.1 gpm, Forged Brass, 3-12/16" L x 6-15/16" H,
,

Watts Water AS-MB125

Item#:
AS-MB125
Manufacturer Item:
0858548
Manufacturer:
WATTS REGULATOR CO.
Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).
  • Built-In Dial-Set- no gauge is needed to install or set static pressure
  • Built-in strainer to simplify maintenance
  • Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
  • Balanced single seat construction
  • Minimum pressure differential between inlet and outlet ports is 14.5 psig
  • Plus or minus 4 psig dial calibration
  • Less than 0.25% of weighted average of low lead content
  • 1/4" NPT gauge tap
  • 10:1 maximum reduction ratio
  • Double union sweat union fittings
,
,

Resideo Braukmann DS06-101-DUT-LF

Item#:
DS06-101-DUT-LF
Manufacturer Item:
DS06101DUTLF
Manufacturer:
HONEYWELL
Arzel PAN-SOLO4 Solenoid Valve, for use with MPS and AirBoss Panels, 24 VDC
  • ,
    ,

    Arzel PAN-SOLO4

Item#:
PAN-SOLO4
Manufacturer Item:
PAN-SOLO4
Manufacturer:
ARZEL SOLUTION-BASED COMFORT
Duro Dyne RS156 Steel Damper Regulator
Item#:
RS156
Manufacturer Item:
8086
Manufacturer:
DURO DYNE NATIONAL CORPORATION
Webstone Valve Pro-Connect Press 74003 Air Separator, 3/4", FNPT, 150 psig, 6 gpm, Forged Brass, 3-5/8" W x 6-1/4" H
  • Reduces noise
  • Improves system efficiency and operation
  • Reduces wear on system components
  • Requires no regular maintenance
  • Fewer call backs
  • Stainless steel coalescing medium is a more durable alternative
  • Pin guided float ensures smooth operation
  • Vent head and coalescing medium can be removed for cleaning
  • Flow may be directed into either side of the unit
,

Webstone Valve 74003

Item#:
74003
Manufacturer Item:
H-74003
Manufacturer:
WEBSTONE COMPANY INC
Honeywell SPRD08 Zonefirst SPRD Static Pressure Bypass Regulating Damper 8"

Honeywell SPRD08

Item#:
SPRD08
Manufacturer Item:
SPRD08
Manufacturer:
HONEYWELL
Honeywell V8043B1027 Zone Valve 2-Way Normally Open24 VAC Straight 3/4" OD
Item#:
V5011N1065
Manufacturer Item:
V5011N1065
Manufacturer:
HONEYWELL
The Resideo SuperVent, purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding.
  • No clog vent
  • Dirt and debris resistant
  • 360 deg adjustable collar ring for installation flexibility
  • Stainless steel concentrator which eliminates gurgling noise
  • Bronze body for rigid construction
Sid Harvey Item #:PV150: Replaces Part #:'s : R55-621,
,

Honeywell PV150

Item#:
PV150
Manufacturer Item:
PV150
Manufacturer:
HONEYWELL
All field vent hoods are made of heavy gauge aluminum and can be used with natural gas, LP gas or oil-fired equipment. There are five diameters ranging from 3 to 8 Inch. The concentric pipe, angled outlet deflectors, and spaced plate design allow for better heat dissipation. This type of construction minimizes the effects of heat on the outside wall. The angled hood design reduces the effects of wind on the venting system. The inner and outer pipe are a continuous structure. This allows for easy installation to power venter or vent pipe and also eliminates possible positive pressure leaks in the wall section.
  • Can be used in conjunction with PVG and PVO power venters or with forced draft systems
  • 7-5/8 x 7-5/8 shield for 0 clearance to combustible
  • Designed for standard vent pipe and Class B type double-wall (B-Vent) connection
  • Provides proper clearance between flue gas stream and wall combustible
Item#:
SWH-4
Manufacturer Item:
46092800
Manufacturer:
FIELD CONTROLS LLC
|◀ 1537 - 1548 of 1659 ▶|
View: