S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER
Efficiency
14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
(depending on unit size and indoor combination installed)
Indoor air quality accessories available
Sound
Sound levels as low as 69 dBA with accessory sound blanket
Comfort
System supports programmable or standard thermostat controls
Reliability
Non-ozone depleting refrigerant
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Loss of charge switch
Filter drier
Balanced refrigeration system for maximum reliability
International Comfort Products N4H5S18CKAAA
Item#:
N4H5S18CKAAA
Manufacturer Item:
N4H5S18CKAAA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Bosch BOVB-60HDN1-M18M
Item#:
BOVB-60HDN1-M18M
Manufacturer Item:
8-733-955-037
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BOVB-36HDN1-M18M
Item#:
BOVB-36HDN1-M18M
Manufacturer Item:
8-733-955-036
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BRB-36HWD1N1-M18
Item#:
BRB-36HWD1N1-M18
Manufacturer Item:
8733954410
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
BUILT TO LAST, EASY TO INSTALL AND SERVICE
All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
Brass suction and liquid line service valves
Fully hermetic scroll compressor with crankcase heater and suction line accumulators
6 - 7.5 Ton
Comfort AlertTM Diagnostic Board LED Go-No-Go and fault code
,Built in time guard anti-short cycle, Phase protection, Fault code retention logic
Full perimeter base rail with built-in rigging adapters and fork truck slots 20 Ton
Filter drier standard with each unit (shopped for field installation)
Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
Direct drive permanently lubricated condenser fan motors
Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
All units have high and low pressure switches
Outdoor temperature cooling operation range up to 125F (52C) and down to 35F ( 2C ) using winter start kit
Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
All units factory run tested
International Comfort Products CHS072HAA0A00A
Item#:
CHS072HAA0A00A
Manufacturer Item:
CHS072HAA0A00A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
New composite base pan dampens sound, secures
wire grille, eliminates corrosion and reduces number of
fasteners needed
Improved tubing design reduces vibration and stress,
making unit quieter and reducing opportunity for leaks
Optimized defrost characteristics - decrease defrosting
and provide better home comfort
Powder coat paint finish for a long lasting professional finish
Optimized reversing valve sizing improves shifting performance for quieter unit operation and increased life of the system
Enhanced mufflers help to dissipate vibration energy for quieter unit operation
Scroll compressor a sound abating feature added to
the compressor significantly reduces noise when system
transitions in and out of defrost mode
Modern cabinet aesthetics increased curb appeal with visually appealing design
Louver panels provide ultimate coil protection,
enhance cabinet strength and increase cabinet rigidity
Optimized fan orifice optimizes airflow and reduces unit sound
Rust resistant screws confirmed through 1500-hour salt spray testing
Service valve has between 3"-4"-5" valve space provides a minimum working area of 27-square inches for easier access
Integrated heat pump lift receptacle allows standard
CPVC stands to be inserted into the base
15" wide, industry leading corner service access
makes repairs easier and faster.
External gauge port access allows easy connection of
low-loss gauge ports
Single-row condenser coil makes unit lighter and allows
thorough coil cleaning to maintain out of the box
performance
Fewer cabinet fasteners allow for faster access to
internal components and hassle-free panel removal
Service trays hold fasteners or caps during service calls
QR code provides technical information on demand for
faster service calls
Fan motor harness with extra-long wires allows unit
top to be removed without disconnecting fan wire
Fujitsu FO4815RSJNAA
Item#:
FO4815RSJNAA
Manufacturer Item:
FO4815RSJNAA
Manufacturer:
FUJITSU
Features
New composite base pan dampens sound, secures
wire grille, eliminates corrosion and reduces number of
fasteners needed
Improved tubing design reduces vibration and stress,
making unit quieter and reducing opportunity for leaks
Optimized defrost characteristics - decrease defrosting
and provide better home comfort
Powder coat paint finish for a long lasting professional finish
Optimized reversing valve sizing improves shifting performance for quieter unit operation and increased life of the system
Enhanced mufflers help to dissipate vibration energy for quieter unit operation
Scroll compressor a sound abating feature added to
the compressor significantly reduces noise when system
transitions in and out of defrost mode
Modern cabinet aesthetics increased curb appeal with visually appealing design
Louver panels provide ultimate coil protection,
enhance cabinet strength and increase cabinet rigidity
Optimized fan orifice optimizes airflow and reduces unit sound
Rust resistant screws confirmed through 1500-hour salt spray testing
Service valve has between 3"-4"-5" valve space provides a minimum working area of 27-square inches for easier access
Integrated heat pump lift receptacle allows standard
CPVC stands to be inserted into the base
15" wide, industry leading corner service access
makes repairs easier and faster.
External gauge port access allows easy connection of
low-loss gauge ports
Single-row condenser coil makes unit lighter and allows
thorough coil cleaning to maintain out of the box
performance
Fewer cabinet fasteners allow for faster access to
internal components and hassle-free panel removal
Service trays hold fasteners or caps during service calls
QR code provides technical information on demand for
faster service calls
Fan motor harness with extra-long wires allows unit
top to be removed without disconnecting fan wire
Fujitsu FO4215RSJNAB
Features and Benefits
EcoNet Enabled: Automatic system configuration and optimization
Diagnostics & Bluetooth Connectivity: With the BIuArch
Contractor & EcoNet Apps, built-in technology makes
advanced set-up, monitoring, troubleshooting, and repairing
the product easier than ever before
Brushless DC Condenser Motors (BLDC): Enhances
reliability and allows for sasier serviceabilty
Swept Wing Fan Technology: Features quieter operation
and improved unit acoustics.
Expanded Valve Space: 3 in. 4 in. - 5 in. service valve.
space provides a minimum working area of 27-square Inches for easier access
Triple Service Access: 15 in. wide, industry leading comer
service access, two fastener, removeable corer and
Individual louver panels - makes repairs easier and faster
Fujitsu FOC1836MJAZCA1
Features
New composite base pan dampens sound, captures
louver panels, eliminates corrosion and reduces number
of fasteners needed
Powder coat paint system for a long lasting professional
finish
Scroll compressor uses 70% fewer moving parts for
higher efficiency and increased reliability
Modern cabinet aesthetics increased curb appeal with
visually appealing design
Curved louver panels provide ultimate coil protection,
enhance cabinet strength, and increased cabinet rigidity
Optimized fan orifice optimizes airflow and reduces
unit sound
Rust resistant screws confirmed through 1500-hour
salt spray testing
3"-4"-5" service valve space provides a minimum
working area of 27-square inches for easier access
15" wide, industry leading corner service access
makes repairs easier and faster
External gauge port access allows easy connection of
low-loss gauge ports
Single-row condenser coil makes unit lighter and
allows thorough coil cleaning to maintain out of the
box performance
Fewer cabinet fasteners allow for faster access to
internal components and hassle-free panel removal
Service trays hold fasteners or caps during service
calls
QR code provides technical information on demand for
faster service calls
Fan motor harness with extra long wires allows unit top
to be removed without disconnecting fan wire.
Fujitsu FO1814RSJNAB
REFRIGERATION CIRCUIT
Scroll compressors on all models
Suction line accumulator factory installed
Biflow filterdrier included for field installation
Integrated solid state control with TimeTemperature Defrost
High and Low pressure switches
Round tube / aluminum plate fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R410A refrigerant
BUILT TO LAST
Bakedon powder coat finish over galvanized steel
Postpainted (black) coil fins
Coated, weatherresistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for extra protection
International Comfort Products N4H448GHP
Item#:
N4H448GHP
Manufacturer Item:
N4H448GHP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll compressors on select models
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
External high and low refrigerant service ports
Copper tube / aluminum fin coil
PERFORMANCE
Communicating, self- configuring operation when used with
Observer Wall Control (TSTAT0201CW)
Outdoor temperature sensor factory installed
Compressor sound blanket standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Easy access service valves on all models
Innovative control box design
High and low pressure switches
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection
Corner posts for extra strength and style
International Comfort Products N4H7T24AKAAA
Item#:
N4H7T24AKAAA
Manufacturer Item:
N4H7T24AKAAA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Energy Efficiency 13.8 - 16.0 SEER2 / 11.2 - 13.0 EER2
Levels as low as 65 dBA
Design Features
Small footprint
Durable cabinet
All steel cabinet construction
Mesh coil guard
Reliability, Quality and Toughness
Scroll compressor
Factory-supplied filter drier
High pressure switch
Line lengths up to 250ft (76.2m)
Low ambient cooling (down to 0°F / -18°C) with approved low ambient accessory kits.
International Comfort Products S4A5S30AKAWA
Item#:
S4A5S30AKAWA
Manufacturer Item:
S4A5S30AKAWA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
