S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER
Quiet performance Single-stage compressor operation Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating Durably built to withstand bad weather and debris Designed for corrosion resistance and lasting performance Single-speed fan motor System protecting high and low-pressure switches and filter drier Durable, protective inlet grille panels allow easy coil cleaning Baked-on powder coat finish over Gallonvanized steel Compatible with humidity sensing thermostats Suction line accumulator factory installed Bi-flow filter-drier included for field installation Integrated solid state control with time-temperature defrost High and low pressure switches Copper tube/aluminum fin coil Easy access service valves External high and low refrigerant service ports Only two screws to access control panel Post-painted (black) coil fins Coated, weather-resistant cabinet screws Coated inlet grille with 3/8" spacing for extra protection
International Comfort Products N4H442GKP
Item#:
N4H442GKP
Manufacturer Item:
N4H442GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll compressors on all models
Suction line accumulator factory installed
Biflow filterdrier included for field installation
Integrated solid state control with TimeTemperature Defrost
High and Low pressure switches
Copper tube / aluminum fin coil
EASY TO INSTALL AND SERVICE
Easy Access service valves on all models
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R410A refrigerant
BUILT TO LAST
Bakedon powder coat finish over galvanized steel
Postpainted (black) coil fins
Coated, weatherresistant cabinet screws
Coated inlet grille with 3/8 (10mm) grille spacing for
extra protection
International Comfort Products NXH642GKP
Item#:
NXH642GKP
Manufacturer Item:
NXH642GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll Ultratecht compressors on all models
Crankcase Heater factory installed
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
High and low pressure switches
Discharge gas thermostat
Copper tube / aluminum fin coil
PERFORMANCE
Self configuring installation capabilities with Observer
Communicating Wall Control
Outdoor temperature sensor factory installed
Ball Bearing PSC Fan Motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
Corner posts for extra strength and style International Comfort Products
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products Tempstar TCH624GK
Item#:
TCH624GK
Manufacturer Item:
TCH624GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll Ultratecht compressors on all models
Crankcase Heater factory installed
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
High and low pressure switches
Discharge gas thermostat
Copper tube / aluminum fin coil
PERFORMANCE
Self configuring installation capabilities with Observer
Communicating Wall Control
Outdoor temperature sensor factory installed
Ball Bearing PSC Fan Motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
Corner posts for extra strength and style International Comfort Products
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products Tempstar TSH648GKA
Item#:
TSH648GKA
Manufacturer Item:
TSH648GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll Ultratecht compressors on all models
Crankcase Heater factory installed
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
High and low pressure switches
Discharge gas thermostat
Copper tube / aluminum fin coil
PERFORMANCE
Self configuring installation capabilities with Observer
Communicating Wall Control
Outdoor temperature sensor factory installed
Ball Bearing PSC Fan Motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
Corner posts for extra strength and style International Comfort Products
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products Tempstar TSH630GKA
Item#:
TSH630GKA
Manufacturer Item:
TSH630GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll Ultratecht compressors on all models
Crankcase Heater factory installed
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
High and low pressure switches
Discharge gas thermostat
Copper tube / aluminum fin coil
PERFORMANCE
Self configuring installation capabilities with Observer
Communicating Wall Control
Outdoor temperature sensor factory installed
Ball Bearing PSC Fan Motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
Corner posts for extra strength and style International Comfort Products
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products Tempstar TSH642GKA
Item#:
TSH642GKA
Manufacturer Item:
TSH642GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
Copeland Scroll Ultratecht compressors on all models
Crankcase Heater factory installed
Suction line accumulator factory installed
Bi- flow filter- drier included for field installation
Integrated solid state control with Time- Temperature Defrost
High and low pressure switches
Discharge gas thermostat
Copper tube / aluminum fin coil
PERFORMANCE
Self configuring installation capabilities with Observer
Communicating Wall Control
Outdoor temperature sensor factory installed
Ball Bearing PSC Fan Motors on all models
High performance compressor sound shield standard
Isolation compressor grommets
EASY TO INSTALL AND SERVICE
Text based diagnostics with Observer Communicating Wall
Control
Only 2 control wires required from communicating indoor unit to condenser
Easy access service valves on all models
Innovative control box design
External high and low refrigerant service ports
Only two screws to access control panel
Factory charged with R- 410A refrigerant
BUILT TO LAST
High gloss, baked- on powder coat finish over galvanized steel
Post- painted (black) coil fins
Coated, weather- resistant cabinet screws
Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)
Corner posts for extra strength and style International Comfort Products
EASY TO INSTALL AND SERVICE
BUILT TO LAST
International Comfort Products Tempstar TSH636GKA
Item#:
TSH636GKA
Manufacturer Item:
TSH636GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products DLCSRBH36AAK
Item#:
DLCSRBH36AAK
Manufacturer Item:
DLCSRBH36AAK
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Meet the Bosch SV Mode
The i Series Greensource water source heat pump comes equipped with the quality and innovative technology that only Bosch can provide. All units are available in vertical and horizontal configurations. Additionally, several options of return air and supply air are offered as standard, providing configuration flexibility.
Serviceability
All units are designed to be serviced from the front of the unit. Schrader valves for high and low pressure gauges and the electrical box components are easily accessible for diagnosing and servicing the unit.
Quiet Operation
Noise reduction is a critical consideration of the unit design. All SV units have a unique floating base compressor that is mounted on a heavy steel plate which rests on a high density rubber pad on the base of the unit.
Hanging Brackets
All horizontal units come standard with hanging bracket kits for suspending the unit from field supplied hanger rods. These kits include heavy duty steel brackets and rubber grommets for sound and vibration isolation from the building structure.
Filter Racks and Unit Options Units come standard with a 1 filter rack and 1 construction filter. A 1 return duct collar is integral to the filter rack eliminating the need for field mounted duct collars.
Bosch SV015-1HZN-FRE
Item#:
SV015-1HZN-FRE
Manufacturer Item:
7-735-086-420
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Meet the Bosch SV Mode
The i Series Greensource water source heat pump comes equipped with the quality and innovative technology that only Bosch can provide. All units are available in vertical and horizontal configurations. Additionally, several options of return air and supply air are offered as standard, providing configuration flexibility.
Serviceability
All units are designed to be serviced from the front of the unit. Schrader valves for high and low pressure gauges and the electrical box components are easily accessible for diagnosing and servicing the unit.
Quiet Operation
Noise reduction is a critical consideration of the unit design. All SV units have a unique floating base compressor that is mounted on a heavy steel plate which rests on a high density rubber pad on the base of the unit.
Hanging Brackets
All horizontal units come standard with hanging bracket kits for suspending the unit from field supplied hanger rods. These kits include heavy duty steel brackets and rubber grommets for sound and vibration isolation from the building structure.
Filter Racks and Unit Options Units come standard with a 1 filter rack and 1 construction filter. A 1 return duct collar is integral to the filter rack eliminating the need for field mounted duct collars.
Bosch SV030-1VTN-FRT
Item#:
SV030-1VTN-FRT
Manufacturer Item:
7-735-072-114
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Meet the Bosch SV Mode
The i Series Greensource water source heat pump comes equipped with the quality and innovative technology that only Bosch can provide. All units are available in vertical and horizontal configurations. Additionally, several options of return air and supply air are offered as standard, providing configuration flexibility.
Serviceability
All units are designed to be serviced from the front of the unit. Schrader valves for high and low pressure gauges and the electrical box components are easily accessible for diagnosing and servicing the unit.
Quiet Operation
Noise reduction is a critical consideration of the unit design. All SV units have a unique floating base compressor that is mounted on a heavy steel plate which rests on a high density rubber pad on the base of the unit.
Hanging Brackets
All horizontal units come standard with hanging bracket kits for suspending the unit from field supplied hanger rods. These kits include heavy duty steel brackets and rubber grommets for sound and vibration isolation from the building structure.
Filter Racks and Unit Options Units come standard with a 1 filter rack and 1 construction filter. A 1 return duct collar is integral to the filter rack eliminating the need for field mounted duct collars.
Bosch SV042-1HZN-FRE
Item#:
SV042-1HZN-FRE
Manufacturer Item:
7-735-072-126
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP