|◀ ◀ 613 - 624 of 876 ▶ ▶|
View:

Air Conditioning Condensing Unit Non-Communicating Composite Base 5 Ton

Features
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • 15" wide, industry leading corner service access  makes repairs easier and faster
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

    Fujitsu FO6014CSCNB

    • Item#:
    FO6014CSCNB
    Manufacturer Item:
    FO6014CSCNB
    Manufacturer:
    FUJITSU(UNITARY)
     
    FO6014CSCNB_Spec

    Commercial Split System Condensing Unit 10 Ton 117k BTU Cool 11.2 EER Single Circuit

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS121HAA0A00A

    • Item#:
    CAS121HAA0A00A
    Manufacturer Item:
    CAS121HAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Condition Condenser 10 Ton 120K BTU 460/3 VAC

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS121LAA0A00A

    • Item#:
    CAS121LAA0A00A
    Manufacturer Item:
    CAS121LAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Commercial Split System Condensing Unit 10 Ton 117k BTU Cool 11.2 EER Single Circuit

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS120HDA0A00A

    • Item#:
    CAS120HDA0A00A
    Manufacturer Item:
    CAS120HDA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Comfortmaker Air Conditioning Condensing Unit 2.5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll® compressors on all models
  • Filterdrier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil PERFORMANCE
  • Communicating, selfconfiguring operation when used with Observer Wall Control (TSTAT0201CW)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • High gloss, bakedon powder coat finish over galv. steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style

    International Comfort Products CSA630GKA

    • Item#:
    CSA630GKA
    Manufacturer Item:
    CSA630GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CSA630GKA_Spec

    Air Conditioning Condensing Unit 2 Ton 15 SEER 208/230/1

    Fujitsu FOC1524VJAZCA1

    Item#:
    FOC1524VJAZCA1
    Manufacturer Item:
    FOC1524VJAZCA1
    Manufacturer:
    FUJITSU

    Air Conditioning Condensing Unit 4 Ton 16 SEER 208/230/1

    Fujitsu FOC1648VJAZCA1

    Item#:
    FOC1648VJAZCA1
    Manufacturer Item:
    FOC1648VJAZCA1
    Manufacturer:
    FUJITSU

    Air Conditioning Condensing Unit 2 Ton 16 SEER 208/230/1

    Fujitsu FOC1636VJAZCA1

    Item#:
    FOC1636VJAZCA1
    Manufacturer Item:
    FOC1636VJAZCA1
    Manufacturer:
    FUJITSU

    Air Conditioning Condensing Unit 5 Ton 14.3 SEER 208/230/1

    Fujitsu FOC1460SJAZNA1

    Item#:
    FOC1460SJAZNA1
    Manufacturer Item:
    FOC1460SJAZNA1
    Manufacturer:
    FUJITSU
     
    FOC1460SJAZNA1_Spec

    COND,UNIT 4T 14.3S 208/230/1

  • Lighter Footprint & Less Environmental Impact from New 7mm Condenser Coil:
  • Provided by a decrease in refrigerant requirements and an overall weight reduction
  • Efficient Cooling: Up to 16 SEER2/13 EER2
  • Expanded Value Space: 3in.  4in.  5 in. service valve space  provides a minimum working area of 27-square inches for easier access
  • Triple Service Access: 15 in. wide, industry leading corner service access  makes repairs easier and faster. The two fastener, removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
  • System Matching Simplicity: Matches to all tiers of gas furnaces
  • Modern Cabinet Aesthetics: High curb appeal with visually appealing design Curved Louver Panels: Provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Diagnostic Service Window: With two-fastener opening  provides access to the high and low pressure
  • External Gauge Port Access: Allows easy connection of low-loss gauge ports
  • QR Code: Provides technical information on demand for faster service calls
  • Fan Motor Harness: With extra-long wires allows unit top to be removed without disconnecting fan wire

    Fujitsu FOC1448SJAZNA1

    • Item#:
    FOC1448SJAZNA1
    Manufacturer Item:
    FOC1448SJAZNA1
    Manufacturer:
    FUJITSU
     
    FOC1448SJAZNA1_Spec

    Heil Air Conditioning Condensing Unit 5 Ton

    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on select models
  • Filterdrier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil PERFORMANCE
  • Communicating, selfconfiguring operation when used with Ion System Control (SYST0101CW)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets EASY TO INSTALL AND SERVICE
  • Text based diagnostics with Ion System Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • High gloss, bakedon powder coat finish over galv. steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style

    International Comfort Products HSA560GKA

    • Item#:
    HSA560GKA
    Manufacturer Item:
    HSA560GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    HSA560GKA_Spec

    Air Conditioning Condensing Unit High Efficiency 4 Ton

    Efficiency:
  • Up to 17.0 SEER / 12.2  14.0 EER Reliability
  • R-410A refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier Durability
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Longline  up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
  • Low ambient down to 0°F (-18°C).

    International Comfort Products N4A648GLB

    • Item#:
    N4A648GLB
    Manufacturer Item:
    N4A648GLB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A6-ICP-Wiring_Misc
    N4A6-ICP_Broc
    N4A6-ICP_Install
    |◀ ◀ 613 - 624 of 876 ▶ ▶|
    View: