|◀ ◀ 601 - 612 of 876 ▶ ▶|
View:

Evaporator Coil Cased Slab 4 Ton 48K R22/R410A

Features
  • Rifled copper tubing, enhanced aluminum fins.
  • Fully insulated cabinets with faced insulation.
  • Split access doors in front of cabinet for easy service access.
    Refrigerant and plumbing connections:
  • Immersion tested at 500 psi, followed by nitrogen pressurization and factory sealing to ensure optimal system integrity and long-term reliability.
  • Schrader provided for pressure assurance testing with 3/8 ODS Stem mounted on end of Liquid Line.
  • Condensate Drains: 3/4 NPT
  • Liquid line: 3/8 ODS
  • Suction line: 3/4 ODS on 1-1/2-ton to 3-ton 7/8 on 3-1/2-ton to 5-ton

    Aspen CH48A3G-100L-000

    • Item#:
    CH48A3G-100L-000
    Manufacturer Item:
    CH48A3G-000
    Manufacturer:
    ASPEN MFG. LLC

    Ductless Mini-Split Outdoor 36K BTU 230 VAC

  • Cost-competitive
  • Available in 115V and 208/230V
  • Built-in basepan heater on heat pump units
  • Auto-restart function
  • Condenser high-temperature protection
  • Refrigerant leakage detection
  • Quiet outdoor operation, as low as 52 dB(A)
  • Anti-corrosive fin coating
  • Piping length 82 ~ 164 ft. (25-50 m.)
  • Cooling operating range 0° ~ 22° F (-17° ~ 50° C)
  • Heating operating range 0° ~ 86° F (-17° ~ 30° C)

    International Comfort Products DLCSRBH36AAK

    • Item#:
    DLCSRBH36AAK
    Manufacturer Item:
    DLCSRBH36AAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Mini-Splits_Broc

    Evaporator Coil Cased 5 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC60A24-245L-059

    • Item#:
    CC60A24-245L-059
    Manufacturer Item:
    CC60A24-245L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    Evaporator Coil Cased 2-1/2 Ton R22/R410A Up-Flow/Down-Flow

    STANDARD SPECIFICATIONS
  • Rifled copper tubing, enhanced aluminum fins.
  • Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
  • Left- or right-hand refrigerant and plumbing connections.
  • Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
  • Externally mounted flowrater body with Schrader valve for hiss-testing.
  • Heavy duty plastic drain pans on most models.
  • Upflow without field modification. Downflow applications require plate kit, included.
  • AHRI certifiable with all brands of A/C and heat pump systems.
  • ETL listed for use with both R-22 and R-410a when proper metering device is used.
  • Ten-year limited warranty.

    Aspen CC30A24-145L-059

    • Item#:
    CC30A24-145L-059
    Manufacturer Item:
    CC30A24-145L-059
    Manufacturer:
    ASPEN MFG. LLC
     
    Aspen-Evaporator_Spec

    RES,PACKAGED, UNIT,GAS,3T R410A,230/3

    Faster comfort
  • Next-generation high-efficiency blower
  • delivers reduced energy consumption.
  • Consistent comfort
  • High-efficiency standard ECM motor ensures dependable air distribution. Quiet comfort
  • Advanced fan design and vibration-reducing technology minimizes noise to provide you with the peace and quiet you expect from YORK Dependable comfort
  • Stainless steel heat exchanger provides long
  • life and optional lifetime warranty*.
  • All-aluminum indoor coil resists corrosion to extend operating life.
  • Robust compressor provides dependable, long-lasting operation.
  • Durable, corrosion-resistant materials and finish - the cabinet is finished with powder coat paint subjected to 750-hour salt spray tests. Galvanized steel base rails protect your unit from the elements.
  • Extruded steel louvers add strength and stability for added durability.
    • Item#:
    PCG4A360753X4
    Manufacturer Item:
    PCG4A360753X4
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM
     
    PCG4-Series_Spec

    RES,PACKAGED, UNIT,GAS,4T R410A,230/3

    Faster comfort
  • Next-generation high-efficiency blower
  • delivers reduced energy consumption.
  • Consistent comfort
  • High-efficiency standard ECM motor ensures dependable air distribution. Quiet comfort
  • Advanced fan design and vibration-reducing technology minimizes noise to provide you with the peace and quiet you expect from YORK Dependable comfort
  • Stainless steel heat exchanger provides long
  • life and optional lifetime warranty*.
  • All-aluminum indoor coil resists corrosion to extend operating life.
  • Robust compressor provides dependable, long-lasting operation.
  • Durable, corrosion-resistant materials and finish - the cabinet is finished with powder coat paint subjected to 750-hour salt spray tests. Galvanized steel base rails protect your unit from the elements.
  • Extruded steel louvers add strength and stability for added durability.
    • Item#:
    PCG4B481003X4
    Manufacturer Item:
    PCG4B481003X4
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Air Conditioning Condensing Unit Quiet & Efficient Operation 3 Ton

  • 3-Speed Fan PSC Motor
  • Horizontal
  • Control Type 40 Volt Amp Transformer
  • Applicable Standard CSA (Canada and US), GAMA

    Armstrong Air Conditioning 4AC13B36P

    • Item#:
    4AC13B36P
    Manufacturer Item:
    4AC13B36P
    Manufacturer:
    ALLIED AIR ENTERPRISES
     
    4AC13_Armstrong_Install
    4AC13_Armstrong_Spec

    Air Condition Condenser 7-1/2 Ton 90K BTU 230/3 VAC

  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor Protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

    International Comfort Products CAS091LAA0A00A

    • Item#:
    CAS091LAA0A00A
    Manufacturer Item:
    CAS091LAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Package Roof Top Unit 4 Ton 36K BTU 230/3 Medium Static X-Vane

  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAV048H0FA0AAA

    • Item#:
    RAV048H0FA0AAA
    Manufacturer Item:
    RAV048H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    RGV-RAV_Spec

    Package Roof Top Unit Gas 12.5 Ton 150K BTU 15 SEER 460/3 Hi Heat, Stand/Medium Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV150LE2A0AAA

    • Item#:
    RGV150LE2A0AAA
    Manufacturer Item:
    RGV150LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGVSERIES1 (2)

    Package Roof Top Unit Gas/Elec. 20 Ton 460/3 Medium Heat

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV240LE2A0AAA

    • Item#:
    RGV240LE2A0AAA
    Manufacturer Item:
    RGV240LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Conditioning Condensing Unit Composite Base 10 Ton

    Standard Features:
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • PlusOne Expanded Valve Space  3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • PlusOne Triple Service Access  15" wide, industry leading corner service access  makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
  • Diagnostic service window with two-fastener opening  provides access to the high and low pressure.
  • External gauge port access  allows easy connection of low-loss gauge ports
  • 35% fewer cabinet fasteners and fastener-free base  allow for faster access to internal components and hassle-free panel removal Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
  • Low ambient control  a pressure sensitive fan cycling control allows operation of units down to 0°F [-18°C].
  • High pressure control  manual reset control deactivates system if abnormally high pressure occurs.
  • Low pressure control  automatic reset control deactivates system if abnormally low pressure or refrigerant loss occurs.
  • Service valves  standard on liquid and suction lines.
  • Condenser fan motors  direct drive, single-phase permanently lubricated ECM motors with inherent overload protection.
  • Transformer  50VA step-down type, from Line to 24 volts.
  • Contactor  the contactor is an electrical switch which operates the compressor and condenser fans. Its 24 volt coil is activated through the High Pressure Control and Low Pressure Control on a call for cooling.
  • Equipment ground  lug for field connection of ground wire.
  • Testing  all units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.
  • Compressor time delay control  compressor will remain off for five minutes after power or thermostat interruption, allowing system pressures to equalize. (Model No. RXMD-B01)
  • Filter/Drier  a liquid line filter drier is shipped with each unit for field installation.

    Fujitsu RAWL-121CAZ

    • Item#:
    RAWL-121CAZ
    Manufacturer Item:
    RAWL-121CAZ
    Manufacturer:
    FUJITSU(UNITARY)
     
    RAWL-Fujitsu_Spec
    |◀ ◀ 601 - 612 of 876 ▶ ▶|
    View: