Midwest P6510L Left Cut Offset Aviation Snip, 18/22 ga Cold Rolled Steel/Stainless Steel, 9-3/4" OAL

• Offset models in 3-blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut
• Cuts tighter curves than regular aviation snips
• Easiest used in right hand
• Bottom blade serrated
• Long blade life, precision-formed blades for aviation and bulldog snips
• Ultimate spring durability, reinforced chrome silicone valve-quality wire lasts for a lifetime
• Quick identification - color coding on both blades and handles plus arrow icons allow

Sid Harvey Item #:P6510-L: Replaces Part #:'s : 14516,
,

Midwest P6510-L

Midwest P6510-L

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

,
,

Malco S6R

Malco S6R

The time-saving Turboshear model number TS1 inserts directly into the chuck of a standard 1200 RPM A/C or cordless drill. Its that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) Galvanized steel. Blind cuts require only a 1/2" starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable. For premium performance without the premium price of a dedicated power shear, Turboshear is an easy addition to every tool bag.

• Inserts into chuck of A/C or cordless drill
• Offset design saves hands
• Navigates tight patterns and square cuts
• Cuts a variety of building materials
• Cut-away view
• Tsdc drill clamp (optional)
• Made in the U.S.A.

,
,

Malco TS1

Malco TS1

Built-in wire cutter lets you finish the job you started with just one tool! double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. comfortable, non-slip vinyl gripped handles.

• Built-in wire cutter
• Double edged blade
• Cuts from either direction
• Fine honed blade
• 10.4 to 1 - 11.9 to 1 wire cutter variable leverage ratio (high/low) throughout stroke

,
,

Malco T671-2

Malco T671-2

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

Sid Harvey Item #:T646-1: Replaces Part #:'s : 13447,
,

Malco T646-1

Malco T646-1

Malco 12F Folding Tool, 22 ga Sheet Metal, 12" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment

Sid Harvey Item #:T646-3: Replaces Part #:'s : 13019,
,

Malco T646-3

Malco T646-3

Malco DS1 Anodized Aluminum Duct Stretcher, 16" OAL

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole,
  ,
  
  
  
  

  T646-5

  
  

  T646-5

Malco DS2 Anodized Aluminum Offset Duct Stretcher, 16" OAL

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up holeSid Harvey Item #:T646-6: Replaces Part #:'s : 13167,
  ,
  
  
  
  

  Malco T646-6

  
  

  Malco T646-6

The non-slip serrated jaws of Wiss metalmaster snips are made of tough, wear-resistant molybdenum steel to provide the durability demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves. The handles are formed of special high strength steel and have a margin of strength far above the amount of hand pressure that can be applied.

• Cuts straight (or wide curves left or right in light stock)
• Accomplishes most metal cutting requirements of the home crafts man

Sid Harvey Item #:T652: Replaces Part #:'s : 5733,
,

T652

T652

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.35 mm). light-weight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) Galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20" (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.

• Versatile for a variety of metal work
• Long-lasting cutter bit
• Precision fit sealed bearings
• Easy adjusting pivot pin

Sid Harvey Item #:T646-8: Replaces Part #:'s : 13275,
,

Malco T646-8

Malco T646-8

The original Max2000 features euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All Max2000 aviation snips feature superior hardened blade edges for"maximum" cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! and an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

• Fast offset cuts in vinyl plastics, layered metal and seams
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Cuts sharp right angles, straight lines and 5" diameter circles
• Feature a serrated upper jaw of hardened alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up

,
,

Malco T652-5

Malco T652-5

The original Max2000 features euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All Max2000 aviation snips feature superior hardened blade edges for"maximum" cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! and an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

• Fast offset cuts in vinyl plastics, layered metal and seams
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Cuts sharp left angles, straight lines and 5" diameter Circles
• Feature a serrated upper jaw of hardened alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up

,
,

Malco T652-4

Malco T652-4