Taco 007E-2F4 Cast Iron High-Efficiency ECM Circulator Pump, 16 gpm, 120 volt, 4830 RPM Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor uses up to 85% less electricity
• BIO Barrier protects pump from system contaminants
• SureStart automatically frees locked rotor condition and self-purges air from pump
• Integral flow check (IFC) included
• Dual electrical knockouts, 6" stranded wire leads included for easy wiring
• Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
• Double insulated, no ground wire required
• Whisper quiet operation
• Equipped with a cast iron casing and should be used for closed loop systems only
• Circulator pumps are for indoor use only
• Acceptable for use with water or maximum of 50% water/glycol solution
• Composite stator housing, cartridge and impeller
• Ceramic shaft, ceramic thrust bearing
• EPDM O-ring and gaskets
• Carbon bearing Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.,
  ,
  

  Taco 007E-F4

Taco 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. The 007e is everything you love about the 007. It is ideal for hydronic systems zoned with circulators or zone valves. The 007e delivers the performance equivalent of the 007 plus the reliability and easy installation that made the 00 famous. Install it, forget it.

• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor uses up to 85% less electricity
• Bio Barrier protects pump from system contaminants
• SureStart automatically frees locked rotor condition and self-purges air from pump
• Integral Flow Check (IFC) included
• Dual electrical knockouts, 6" stranded wire leads included for easy wiring
• Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
• Optional 2-way flange model reduces SKU's and provides universal fit-up to any flange position
• Double insulated, no ground wire required
• Whisper quiet operation
• Composite stator housing cartridge
• Ceramic shaft and thrust bearing
• Carbon bearings
• EPDM o-ring and gaskets

,
,

Taco 007E-F2

Taco 0013 In-Line Circulator Pump, 1/6 HP, 115 VAC , 34 gpm

• Includes flange gaskets
• Quiet, efficient operation
• Unique replaceable cartridge design - field serviceable
• Direct drive - low power consumption
• Self lubricating
• No mechanical seal
• Unmatched reliability
• Universal flange to flange dimensions
• Exclusive ACB anti-condensate baffle with ambient air flow-protects motor windings against condensate build-up

  Taco 0013-F3

Taco 0012 Circulator Pump, 1/8 HP, 115 VAC , 52 gpm

• Exclusive ACB anti-condensate baffle with ambient air flow-protects motor windings against condensate buildup
• High velocity performance and compact design
• Quiet, efficient operation
• Direct drive, low power consumption
• Unique replaceable cartridge design-field serviceable
• Self lubricating, no mechanical seal
• No mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions and orientation allows the 0012 to easily replace other models
• Unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator
• Compact, low power consumption design makes it ideal for high-efficiency jobs

  Taco 0012F4-1

Taco 009-SF Circulator Pump, 0 - 8 gpm

• Standard high capacity output
• Compact design
• Quiet, efficient operation
• Direct drive - low power consumption
• Unique replaceable cartridge design - field serviceable
• Self-lubricating
• No mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions

,
,

Taco 009-SF

Taco 007-ZF5-3IFC The redesigned 007-IFC features a larger, removable Integral Flow Check designed to improve pump performance, simplify piping and reduce installation costs. The spring-loaded IFC replaces a separate in-line-flow check to ensure protection against reverse flow and gravity flow. IFC is available on all 00 circulators including priority zoning and variable speed control models.

• Integral Flow Check (IFC) simplifies piping, prevents reverse flow and gravity flow
• Eliminates separate in-line flow check
• Reduces installed costs
• Improves system performance
• Easy to service
• Unique replaceable cartridge design - field serviceable
• Unmatched reliability, maintenance free
• Quiet, efficient operation
• Self-lubricating, no mechanical seal
• Priority zoning

,
,

Taco 007-ZF5-3IFC

General Aire Turrent-On 1A-10GBK Epoxy Coated Disposable Spin-On Fuel Oil

General Filters 1A-10GBK

The field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturer's specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

Sid Harvey Item #:100-30: Replaces Part #:'s : x71-292,
,

Field Controls 100-30

The field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturer's specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

Sid Harvey Item #:100-22: Replaces Part #:'s : x71-184,
,

Field Controls 100-22

The Field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturers specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

• 20 ga steel ring and gate, 26 ga collar
• 63.6 sq-inch nominal capacity
• 25-1/4 - 31-1/2 circumference

Sid Harvey Item #:100-26: Replaces Part #:'s : 6H101,
,

Field Controls 100-26

Apollo Valves 10-407-05 Bronze Safety Relief Valve, 3/4", MNPT x FNPT, 30 psig

• Corrosion resistant construction
• Standard stainless steel spring
• Made in USA

Sid Harvey Item #:10-407-05: Replaces Part #:'s : 27620,
,

Apollo Valves 10-407-05

Field Controls 01950201 10" M+MG2 barometric draft control for gas and oil type M+MG2 barometric draft controls overview solid, oil or gas commercial/industrial, this is a series of compact, rugged, heavy-duty controls for use on large residential, commercial, and industrial applications. The Field Type M+MG2 draft control provides precise draft regulations for solid fuels, oil, gas, or oil/gas appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized. In a gas installation, the double-acting Type M+MG2 is specified instead of a draft hood to give the appliance the assistance of the chimney. In a duel fuel oil/gas or a gas-fired only application, use the M+MG2 as a double-acting draft control with the optional Field Thermal Switch accessory. Use the M+MG2 as a single-acting draft control for oil or solid fuel applications. For any installation with 10" or larger diameter vent pipe, specify our standard M+MG2 Draft Control, the unit that can be adapted to any fuel. The moving part (gate) rests on a long, thin, stainless steel knife edge which, in turn, is supported by self-aligning and self-cleaning bearings. When the heavy gauge gate moves, only the knife edge rests on the bearing for minimum friction and maximum sensitivity to draft changes.

Sid Harvey Item #:100-4: Replaces Part #:'s : 111,
,

Field Controls 100-4