Spirotherm Spirovent Junior Microbubble VJP Series Solid Brass Air,
,

Spirotherm VJP125TM

Spirotherm VJP125TM

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

Sid Harvey Item #:VJR150TM: Replaces Part #:'s : L38-346,
,

Spirotherm VJR150TM

Spirotherm VJR150TM

Peerless Boiler WBV-5 Tankless Hot Water Coil 5 GPM 5-1/8" x 10" Rectangular,

WBV-5

Peerless Boilers 90534 Tankless Coil With Gasket and Screws for WBV-04

X-1020

Zilmet ZEP-05 Expansion Tank 2.1G 3/4 MPT
Specifications

Carbon Steel Shell

Stainless Steel Connection

Butyl fixed membrane

Max operating pressure: 150 PSIG

Operating temperature: 210°F

Factory precharge: 40 PSIG

5 year limited manufacturer warranty,
Zilmet ZEP-05

Zilmet ZEP-05

Zilmet ZHT8-15 Expansion Tank 15 3/4 MPT

ZHT8-15

Zilmet ZHT18-30 Expansion Tank 30 3/4 MPT
Specifications

Carbon Steel Shell

Stainless Steel Connection

Butyl fixed membrane

Max operating pressure: 150 PSIG

Operating temperature: 210°F

Factory precharge: 40 PSIG

5 year limited manufacturer warranty,
Zilmet ZHT18-30

Zilmet ZHT18-30

Zilmet ZHT24-60 Expansion Tank 60 3/4 MPT
Specifications

Carbon Steel Shell

Stainless Steel Connection

Butyl fixed membrane

Max operating pressure: 150 PSIG

Operating temperature: 210°F

Factory precharge: 40 PSIG

5 year limited manufacturer warranty,
Zilmet ZHT24-60

Zilmet ZHT24-60

Taco 007S Circulator Pump, 1/25 HP, 115 VAC , 23 gpm

• Standard high capacity output and compact design
• Quiet, efficient operation
• Direct drive, low power consumption
• Unique replaceable cartridge design-field serviceable
• Self lubricating, no mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions and orientation allows the 0014 to easily replace other models
• Cartridge style, maintenance free, wet-rotor, in-line and single stage circulator pump
• Unique replaceable cartridge contains all of the moving parts and allows the circulator to be easily serviced instead of replacing the entire unit
• For indoor use only

,

,

taco 007-sf5

taco 007-sf5

Taco 0015e3™ 0015E3-F2 Cast Iron High-Efficiency ECM Circulator Pump Taco 0015e3is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Its ideal for hydronic systems zoned with circulators or zone valves. With 3 easy settings, the 0015e3 delivers performance, reliability and ease of installation that made the 00 famous.,
,

taco 0015e3-f2

taco 0015e3-f2

Taco 0010-SF3 Cartridge Circulator Pump, 1/8 HP, 115 VAC , 3250 RPM , 0 - 32 gpm

• Standard high capacity output, compact design
• Quiet, efficient operation
• Direct drive - low power consumption
• Unique replaceable cartridge design - field serviceable
• Self-lubricating
• No mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions
• Stainless steel cartridge, ceramic shaft, carbon bearing, aluminum stator housing

,
,

0010-SF3

0010-SF3