Brand Name
Type
Tonnage
BTU
Refrigerant
Uncased Coil
Cased Coil
|◀ ◀ 145 - 156 of 270 ▶ ▶|
View:

Evaporator Coil Cased 2.5 Ton W/Power-V Technology Upflow/Downflow 17" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation
    • Item#:
    EVD5X24M17A
    Manufacturer Item:
    EVD5X24M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coil Cased Upflow/Downflow W/TXV 2.5 Ton R410A Aluminum

  • Bolt-on TXV metering device factory installed on all models
  • (2) condensate drain connections
  • Removable front access panel
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Non-sweat cabinet even at eXtreme conditions
  • Cabinets meet or eXceed 2% air leakage codes
  • Up flow or down flow installation
  • Compact design, shorter than comparable a-coils
  • Aluminum hairpin
  • 5 years parts limited warranty
    • Item#:
    END4X30L14
    Manufacturer Item:
    END4X30L14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Uncased Upflow/Counterflow W/Piston 2 Ton

    Armstrong Air Conditioning EU1P24AN Evaporator Coil Uncased Upflow/Counterflow W/Piston 2 Ton

    EU1P24AN

    Item#:
    EU1P24AN
    Manufacturer Item:
    1.911195
    Manufacturer:
    ALLIED AIR ENTERPRISES
     
    Armstrong-Evaporators_Spec

    Evaporator Coil Cased 3 Ton W/Power-V Technology Upflow/Downflow 21" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation
    • Item#:
    EVD5X36M21A
    Manufacturer Item:
    EVD5X36M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coil Cased Upflow/Downflow W/TXV 3.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
      Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      END4X42L21

    • Item#:
    END4X42L21
    Manufacturer Item:
    END4X42L21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Cased 2 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
    • Item#:
    EVM4X25M17A
    Manufacturer Item:
    EVM4X25M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X

    Evaporator Coil Cased Upflow/Downflow W/TXV 3.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
      Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      INTERNATIONAL COMFORT PRODUCTS END4X42L17

    • Item#:
    END4X42L17
    Manufacturer Item:
    END4X42L17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Cased 2 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM4X24M14A

    • Item#:
    EVM4X24M14A
    Manufacturer Item:
    EVM4X24M14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X_Spec

    Evaporator Coil Cased 2-1/2 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM4X31M17A

    • Item#:
    EVM4X31M17A
    Manufacturer Item:
    EVM4X31M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X

    COIL,V,MULTIPOS,3.5T,21",R454B ALUM

    Item#:
    EVM5X44M21A
    Manufacturer Item:
    EVM5X44M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coil Cased 1-1/2Ton W/Power-V Technology Upflow/Downflow

  • Performance  Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • Thermostatic Expansion Valves (TXV)  All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • Durable Condensate Pan  The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort. Condensate Drain Pan Plugs  The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Refrigerant Connections  Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tubeonce the pipe swages are cut offto accommodate braze-less compression fittings.
  • Burst Pressure  Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application.
  • UV Knockout  This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Serviceability  Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools

    International Comfort Products EVD4X18M14A

    • Item#:
    EVD4X18M14A
    Manufacturer Item:
    EVD4X18M14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ESD4X

    Evaporator Coil Cased 3 Ton W/Power-V Technology Multipoise

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
  • Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
  • Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM4X36M17A

    • Item#:
    EVM4X36M17A
    Manufacturer Item:
    EVM4X36M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM4X
    |◀ ◀ 145 - 156 of 270 ▶ ▶|
    View: