|◀ ◀ 1129 - 1140 of 1775 ▶ ▶|
View:

Air Handler Hot Water Hydronic 3-3-1/2 Ton 120 49-3/4" H x 21-1/2" W x 25" D

Mortex H15-49-50-A1BC Air Handler Hot Water Hydronic 3-3-1/2 Ton 120 VAC
  • Upflow, Horizontal (right to left)
  • Drain pans are manufactured of durable, non-corrosive plastic, and meet ASHRAE standards for IAQ. Pans are"dry" thus holding minimum water.
  • Drain pans have primary and secondary drains for either left or right hand connections.
  • Cabinet is heavy gauge embossed Gallonvanized steel substrate, with front and top panels pre-painted a durable neutral gray.
  • All units are equipped with factory installed time delay relay as standard.
  • All units have 1 foil faced insulation.
  • All units include a 1" throw away filter.
  • All electric heat units are 208/230/1/60 All hydronic heat units are 115/1/60.
  • Standard units with 12 KW electric heat or larger have a factory installed circuit breaker (UL Requirement). All units 10 KW and smaller may be ordered with or without the circuit breaker option.
  • All units are suitable for"0"" clearance to combustible materials.
  • Electric heat units are field convertible to downflow with factory conversion kit.
  • Blower assembly slides out for easy maintenance.
  • Refrigeration coil connections are swaged and then factory sealed with copper caps to maintain a nitrogen holding charge.
  • All hydronic units include a freeze protection switch.
  • All hydronic units include a compressor lockout switch.

    Mortex Products H15-49-50-A1BC

Item#:
H15-49-50-A1BC
Manufacturer Item:
H15-49-50-A1BC
Manufacturer:
MORTEX PRODUCTS, INC.
 
H15-49-50-A1BC_Spec

COND,HP,5T,VS,HORIZ,DISCH,18S2 R454B

Item#:
HH860E2S11
Manufacturer Item:
HH860E2S11
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM

Hot Water Coil Cased 18 Gauge 7/8" OD Cased Vertical or Horizontal

Direct Coil HPX-2-2125 Hot Water Coil Cased 18 Gauge
Cased/Uncased: Cased - Tonnage: - refrigerant: R410A: Configuration: Upflow/Downflow - Coil Type: M-Coil

Direct Coil HPX-2-2125

Item#:
HPX-2-2125
Manufacturer Item:
HPX-2-2125
Manufacturer:
DIRECT COIL INC.
 
Direct-Coil_Install
Direct-Coil_Misc

COND,HP,2T,VS,HORIZ,DISCH,18S2 R454B

Item#:
HH824E2S11
Manufacturer Item:
HH824E2S11
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM

Hot Water Coil Cased 18 Gauge 7/8" OD Cased Vertical or Horizontal

Direct Coil HPX-2-2450 Hot Water Coil Cased 18 Gauge
Cased/Uncased: Cased - Tonnage: - refrigerant: R410A: Configuration: Upflow/Downflow - Coil Type: M-Coil

Direct Coil HPX-2-2450

Item#:
HPX-2-2450
Manufacturer Item:
HPX-2-2450
Manufacturer:
DIRECT COIL INC.
 
Direct-Coil_Install
Direct-Coil_Misc

Air Handler Multi-Position 230/1 5 Ton R454B TXV ECM

Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE60D5CJ2SS1

    • Item#:
    JHE60D5CJ2SS1
    Manufacturer Item:
    JHE60D5CJ2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 1200 CFM 21" W ECM Motor

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME12C2SN1

    • Item#:
    JME12C2SN1
    Manufacturer Item:
    JME12C2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Air Handler Multi-Position 230/1 3 Ton R454B TXV ECM

    Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE36C5CD2SS1

    • Item#:
    JHE36C5CD2SS1
    Manufacturer Item:
    JHE36C5CD2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    YORK,AIR,HANDLER,17.5 230V,2.0 TON

    Item#:
    JHC24B5AC2SS1
    Manufacturer Item:
    JHC24B5AC2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Air Handler Multi-Position 230/1 5 Ton R454B TXV ECM

    Features
  • Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation
  • Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application
  • Designed for easy installation and service
  • A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion. A2L refrigerant ready An R-454B refrigerant detection system (RDS) is factory installed.

    York JHE60C5CH2SS1

    • Item#:
    JHE60C5CH2SS1
    Manufacturer Item:
    JHE60C5CH2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    Modular Blower 1200 CFM 17.5" W ECM Motor

  • Features Next generation high-efficiency blower
  • Delivers increased airflow and reduced blower watts by 10%, using a standard ECM motor.
  • Two-stage operation Provides flexibility in application with single and two-stage outdoor equipment.
  • Next generation insulation and gasket design
  • Reduces thermal transmission paths and reduces sweating.
  • Nine speed standard ECM blower motor
  • Provides increased system compatibility.
  • Electric heat kit 8HK field-installed series available for easy installation and service application.
  • Designed for easy installation and service A casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time.
  • Cabinet air leakage Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193.
  • Long lasting quality Structural components made of postpowder painted steel or galvanized steel to prevent corrosion.

    York JME12B2SN1

    • Item#:
    JME12B2SN1
    Manufacturer Item:
    JME12B2SN1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM

    AIR,HANDLER,2T,R454B,TXV 230/1,ECM,48.3"H,17.5"W,20.5"D

    Item#:
    JHE24B5AC2SS1
    Manufacturer Item:
    JHE24B5AC2SS1
    Manufacturer:
    BHC RESIDENTIAL AND LIGHT COMM
    |◀ ◀ 1129 - 1140 of 1775 ▶ ▶|
    View: