S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
MULTIFAMILY CEILING MOUNT FAN COIL
FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or
10 kW
40VA, 208/230V-1-60 transformer
All models use Puron Advance, R-454B refrigerant and have a
hard-shutoff TXV metering device
Adjustable condensate drain pan
FM(C,U)5X, FM(C,U)5Z
Horizontal return applications require field fabricated bottom cover
Cabinets meet the requirement of 1.4% cabinet leakage rate when
tested to ASHRAE Standard 193
Cabinets insulated to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or
side of casing
Performance
PSC motor on all FMU5X & FMC5X models
ECM motor on all FMU5Z & FMC5Z models
Easy To Install Service
A-coil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for
application flexibility
Primary and secondary drain connections exit from the back or side
of the cabinet
Supports furred-down ceiling open return and ducted return
applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X,
FMC5Z, and FMU5Z models with AL in the 10th & 11th position
Item#:
FMU5Z2400AL
Manufacturer Item:
FMU5Z2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
FHMA5X18L0AA
Item#:
FHMA5X18L0AA
Manufacturer Item:
FHMA5X18L0AA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FHSMTT2417SAZTNAN00
Item#:
FHSMTT2417SAZTNAN00
Manufacturer Item:
FHSMTT2417SAZTNAN00
Manufacturer:
FUJITSU
MULTIFAMILY CEILING MOUNT FAN COIL
FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons
Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or
10 kW
40VA, 208/230V-1-60 transformer
All models use Puron Advance, R-454B refrigerant and have a
hard-shutoff TXV metering device
Adjustable condensate drain pan
FM(C,U)5X, FM(C,U)5Z
Horizontal return applications require field fabricated bottom cover
Cabinets meet the requirement of 1.4% cabinet leakage rate when
tested to ASHRAE Standard 193
Cabinets insulated to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or
side of casing
Performance
PSC motor on all FMU5X & FMC5X models
ECM motor on all FMU5Z & FMC5Z models
Easy To Install Service
A-coil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for
application flexibility
Primary and secondary drain connections exit from the back or side
of the cabinet
Supports furred-down ceiling open return and ducted return
applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X,
FMC5Z, and FMU5Z models with AL in the 10th & 11th position
Item#:
FMU5Z3600AL
Manufacturer Item:
FMU5Z3600AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
FHMA5B60L0DA
Item#:
FHMA5B60L0DA
Manufacturer Item:
FHMA5B60L0DA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort
Fujitsu A/C Parts FJ-AC-WIFI-1
Item#:
FJ-AC-WIFI-1
Manufacturer Item:
FJ-AC-WIFI-1
Manufacturer:
FUJITSU
International Comfort Products FHS180LAAA2AUA
Item#:
FHS180LAAA2AUA
Manufacturer Item:
FHS180LAAA2AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Refrigerant leak detection dissipation system for added safety
Multi-tap ECM (electronic commutating motor) motors all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Construction innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations
Horizontal hanging provisions on cabinet
Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter
Easy plug-in provisions for heater installation
Factory installed thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications
FHMA5X30L0BA
Item#:
FHMA5X30L0BA
Manufacturer Item:
FHMA5X30L0BA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
New composite base pan dampens sound, captures
louver panels, eliminates corrosion and reduces number
of fasteners needed
Powder coat paint system for a long lasting professional
finish
Scroll compressor uses 70% fewer moving parts for
higher efficiency and increased reliability
Modern cabinet aesthetics increased curb appeal with
visually appealing design
Curved louver panels provide ultimate coil protection,
enhance cabinet strength, and increased cabinet rigidity
Optimized fan orifice optimizes airflow and reduces
unit sound
Rust resistant screws confirmed through 1500-hour
salt spray testing
3"-4"-5" service valve space provides a minimum
working area of 27-square inches for easier access
15" wide, industry leading corner service access
makes repairs easier and faster
External gauge port access allows easy connection of
low-loss gauge ports
Single-row condenser coil makes unit lighter and
allows thorough coil cleaning to maintain out of the
box performance
Fewer cabinet fasteners allow for faster access to
internal components and hassle-free panel removal
Service trays hold fasteners or caps during service
calls
QR code provides technical information on demand for
faster service calls
Fan motor harness with extra long wires allows unit top
to be removed without disconnecting fan wire.
Fujitsu FO1814RSJNAB
FHSMTT4824SJZTNAB07
Item#:
FHSMTT4824SJZTNAB07
Manufacturer Item:
FHSMTT4824SJZTNAB0
Manufacturer:
FUJITSU
International Comfort Products FHX091L2AA0AUA
Item#:
FHX091L2AA0AUA
Manufacturer Item:
FHX091L2AA0AUA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
FEATURES
Environmentally Balanced Refrigerant Technology
R-410A, chlorine-free, non-ozone depleting refrigerant
Thermostatic Expansion Valve (TXV) designed to maximize
performance with R-410A refrigerant
Energy Efficient Operation
Variable Speed Constant Airflow ECM (Electronically Commutating
Motor) operates efficiently at all speeds
Maximizes efficiency of heating and cooling systems
Ultra low power consumption during fan only operation
Indoor Weather Control
Warm, comfortable heating air temperatures
Unmatched humidity control, especially with thermostat with relative
humidity controls
Airflow and Sound Technology
Diffuser air discharge section for high airflow efficiency and quiet,
smooth operation
High duct static capability
Design meets stringent regulations for cabinet air leakage of less than
2% when tested at 0.5 inches W.C., and cabinet air leakage less than
1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE
193 standard.
Condensate Control and Disposal Technology
Minimal standing waterless microbial growth for improved IAQ and
reduced condensate line clogging and related condensate leakage
Condensate fittings relocated away from turbulent airflow patterns at
the blower entrance for improved condensate control performance
Overflow feature for slope coil units allows condensate to exit the unit
without damage to product under clogged primary and secondary line
conditions
Tested for condensate disposal at conditions much more severe than
those required by AHRI
Primary and secondary drain connections to comply with HUD
All pans constructed of an injection molded glass-filled polycarbonate
engineered resin material, with brass drain connections.
High density, super thick cabinetry insulation with vapor barrier
Indoor Weather Control
engineered resin material, with brass drain connections.
International Comfort Products FTMA4X24L0BA
Item#:
FTMA4X24L0BA
Manufacturer Item:
FTMA4X24L0BA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS