Interface

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.
Fujitsu A/C Parts FJ-IR-WIFI-1NA Interface

Fujitsu A/C Parts FJ-AC-WIFI-1

Item#:

FJ-IR-WIFI-1NA

Manufacturer Item:

FJ-IR-WIFI-1NA

Manufacturer:

FUJITSU

Air Handler Multi-Position 3 Ton ECM R454B TXV 17" Singlar

Refrigerant leak detection dissipation system for added safety

Multi-tap ECM (electronic commutating motor) motors all sizes

Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board

Five available speed tags to meet a wide range of applications

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Construction innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Pre-painted galvanized steel cabinet

Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.

Installation-flexible, multipoise units. 2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations

Horizontal hanging provisions on cabinet

Newly improved filter rack area filter door insulation added for improved air seal. No tools required to access filter

Easy plug-in provisions for heater installation

Factory installed thermostatic expansion valve, TXV, on all coils

Designed for manufactured housing applications

FHMA5X36L0BA

Item#:

FHMA5X36L0BA

Manufacturer Item:

FHMA5X36L0BA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHMA5X36L0BA_Broc

Air Handler Commercial Heat Pump 7-1/2 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX072H2AA0AUA

Item#:

FHX091H2AA0AUA

Manufacturer Item:

FHX091H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX091H2AA0AUA_Spec

Air Handler 3 Ton Multipoise TXV R410A 120 VAC 1-Stage PSC

1.5 - 5 Tons

PSC Blower

EcoNet Enabled

TXV

Multi-Position

42 - 52 Tall

10-Year Warranty (With Registration)

Fujitsu FHRNPS3017SJZTNA

Item#:

FHRNPS3617SJZTNA

Manufacturer Item:

FHRNPS3617SJZTNA

Manufacturer:

FUJITSU

FHRNPS3617SJZTNA_Broc

Air Handler 2 Ton 3 Stage ECM Motor R410A

Constant CFM Motor: When paired with the EcoNet® Smart Thermostat, the motor gradually auto-adjusts from low capacity to 100% of capacity to meet comfort requirements allowing for ultimate humidity control, quieter sounds levels and year-round energy savings When paired with a 24V two-stage thermostat, the air handler runs in 3-speeds to match airflow with outdoor unit

Diagnostics Easy & Quick Diagnostics & Ongoing Monitoring with Bluetooth®2 Technology & EcoNet®: With the BluArch & EcoNet® Apps, built-in technology makes monitoring, troubleshooting and repairing the product easier than ever before The Fujitsu Line with the BluArch App via Bluetooth® technology, features up to 62% faster overall diagnostics over other residential HVAC brands1

No Dip Switches = Fast Seamless Final Installation: The Fujitsu Line, with BluArch App-based commissioning via Bluetooth® technology, features up to 54% faster installation over other residential HVAC brands*

New Fujitsu Air Handler Control Board (AHC): Enables constant CFM airflow Introduces Bluetooth® connectivity for access to advanced diagnostic information from the Contractor App on your mobile device Maintains EcoNet® diagnostics for remote access when shared by the homeowner

Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant

Quieter Sound Levels: Provided by sturdy cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics

Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces

Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility

Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect

Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193

FHRNVV2417SJZTCA

Item#:

FHRNVV2417SJZTCA

Manufacturer Item:

FHRNVV2417SJZTCA

Manufacturer:

FUJITSU

FHRNVV2417SJZTCA_Spec

Interface

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.
Fujitsu A/C Parts FJ-RC-WIFI-1NA Interface

Fujitsu A/C Parts FJ-IR-WIFI-1NA

Item#:

FJ-RC-WIFI-1NA

Manufacturer Item:

FJ-RC-WIFI-1NA

Manufacturer:

FUJITSU

Air Handler Multi-Position TXV 4 Ton 208/230 R410A ECM Motor Installed Metering Device 53-7/16" H x 21-1/8" W x 22-1/16" D

Standard Features

Limited Warranty*

Multi-tap ECM (electronic commutating motor) motors - all sizes

Large, grooved tube, louvered fin coils

Efficient, quiet, time-tested blower housings and diffusers

Sturdy, drainable condensate pans

Cabinet construction features innovations designed to prevent cabinet sweating

Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements

Super-thick R-4.2 insulation with vapor barrier

Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.

Installation-Flexible, multipoise units

Horizontal hanging provisions on cabinet

No tools required to access filter

Newly improved filter rack area filter door insulation added for improved air seal

3- through 30-kW accessory heaters - field installed

Factory-supplied power plug

Easy plug-in provisions for heater installation

Entry options for high and low voltage wiring hook-up

Leak-preventing sweat connections

Thermostatic expansion valve, TXV, on all sizes

Designed for manufactured housing applications

International Comfort Products FJMA4B42L0CB

Item#:

FJMA4B48L0CB

Manufacturer Item:

FJMA4B48L0CB

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FJMA4B48L0CB_Spec

Air Handler 4 Ton Multipoise TXV R410A 120 VAC 21" PSC Motor 21" W x 50-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNPS3621SJZTNA

Item#:

FHRNPS4821SAZTNA

Manufacturer Item:

FHRNPS4821SAZTNA

Manufacturer:

FUJITSU

FHRNPS_SPEC

FHRNPS4821SAZTNA_Broc

FHRNPS4821SAZTNA_Spec

Air Handler Multi-Position 2 Ton Constant Torque TXV 208/230 17-1/2" W x 42-1/2" H x 22" D

Versatile four-way design; Up-flow, downflow, or horizontal left or right applications with optional adapter kits

Sturdy cabinet with 1 foil faced insulation for excellent insulating & sound characteristics

Coil design provides low air pressure drop, high performance, and extremely compact size

Less than 2% cabinet air leakage in accordance with ASHRAE standard 193

Field-installed electric heat kits from 5 kw 25 kw

Slide-out blower with ECM motor

R-410A TXV factory installed for heat pump or air conditioner

4 leg blower motor mount

Aluminum fin construction bonded to internally grooved aluminum tubing with copper stub braze connections

Air handlers are 230/1 Volts

Fujitsu FHRNPS4821SJZTNA

Item#:

FHRNTT2417SJZTNA

Manufacturer Item:

FHRNTT2417SJZTNA

Manufacturer:

FUJITSU

FHRNTT2417SJZTNA_Spec

Air Handler 3.5 Ton Multipoise TXV R410A 120 VAC 1-Stage PSC

1.5 - 5 Tons

PSC Blower

EcoNet Enabled

TXV

Multi-Position

42 - 52 Tall

10-Year Warranty (With Registration)

Fujitsu FHRNPS4221SAZTNA

Item#:

FHRNPS4221SAZTNA

Manufacturer Item:

FHRNPS4221SAZTNA

Manufacturer:

FUJITSU

FHRNPS4221SAZTNA_Broc

Air Handler 5 Ton R410A