|◀ 85 - 96 of 1448 ▶|
View:
Features
  • Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation
  • The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort
  • 1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity
  • The air coil design provides exceptional heat transfer and low air resistance
  • Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB
  • Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions
  • Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

    bosch bovb-36hdn1-m18m

  • Item#:
    BOVB-36HDN1-M18M
    Manufacturer Item:
    8-733-955-036
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • Item#:
    FVM4X6000BL
    Manufacturer Item:
    FVM4X6000BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Bard W24AB-A05ZPXXXJ Wall Mount A/C 2 Ton 230/1 5 KW
    BARD WALL-MOUNTTM Air Conditioners 1.5 - 6 Ton Capacity W18A - W72A Models 208V - 460V 60 hz The Bard Wall-Mount Air Conditioner is an energy efficient self contained system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. This unit is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures, correctional facilities and many more. Factory or field installed accessories are available to meet specific job requirements for your unique application.
  • Complies with efficiency requirements of ANSI/ASHRAE/IES 90.1-2019.
  • Certified to AHRI Standard 390-2021 for SPVU (Single Package Vertical Units).
  • Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL 1995/CSA 22.2 No. 236-05 Fourth Edition.
  • Commercial Product - Not intended for residential applications.
  • Bard is an ISO 9001:2015 Certified Manufacturer.
  • The AHRI Certified mark indicates Bard Manufacturing Company participation in the AHRI Certification program. For verification of individual certified products, go to www.ahridirectory.org.

    W24AB-A05ZPXXXJ

  • Item#:
    W24AB-A05ZPXXXJ
    Manufacturer Item:
    W24AB-A05ZPXXXJ
    Manufacturer:
    BARD MFG COMPANY INC.
    Rheem RGEA14048ACT101AA Package Gas/Electric 4 Ton 230/3 14 SEER 48,000 BTU cooling, 100,00 BTU Heating
      Weight 482 Lbs.s
    • Width 47.5"
    • Height 4"
    • Length 52.4375"
    • SEER 14
    • EER 12
    • Refrigerant R-410A
    • AFUE 81%
    • CFM 3300
    • CFM Cooling 1,600
    • Cooling Capacity 48,000
    • Heating Capacity 10,0000
    • Air Flow Multi-Position
    • Voltage 208/230 VAC
    • Phase 3
    • Circuit Breaker - Min Amps 25
    • Circuit Breaker - Max Amps 35
    • Minimum Circuit Amps 25
    • Blower Motor HP 3/4 HP
    • Blower Motor RPM 1075
    • Blower Motor Speeds Variable
    • Condenser Motor Type Direct Drive
    • Condenser Motor HP 1/3 HP
    • Condenser Motor RPM 1075
    • Condenser Motor Speeds 1
    • Rated Load Amps 13.1
    • Locked Rotor Amps 83.1
    • Drive Type Direct
    • Compressor (1) Scroll
    • Gas Connection 1/2" [12.7 mm] N.P.T.
    • UL Listed Yes
    • Nominal AFUE 81Nominal SEER 14Nominal EER 11Product Family RGEA14

      RGEA14048ACT101AA

    Item#:
    RGEA14048ACT101AA
    Manufacturer Item:
    RGEA14048ACT101AA
    Manufacturer:
    FUJITSU(MINI-SPLITS)
  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • Item#:
    FVM4X2400BL
    Manufacturer Item:
    FVM4X2400BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products CPHEATER130A03 Heater,Elec,10Kw,230/1,Breaker

    CPHEATER130A03

    Item#:
    CPHEATER130A03
    Manufacturer Item:
    WZH1002SX
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products Commercial CRECOHRN001A00 Economizer Kit Harness

    International Comfort Products Commercial CRECOHRN001A00

    Item#:
    CRECOHRN001A00
    Manufacturer Item:
    CRECOHRN001A00
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products Commercial CRECOMZR106A00 Horizontal Economizer Low Leak

    CRECOMZR106A00

    Item#:
    CRECOMZR106A00
    Manufacturer Item:
    CRECOMZR106A00
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products Commercial CRECOMZR105A00 Vertical Economizer Low Leak

    International Comfort Products Commercial CRECOMZR105A00

    Item#:
    CRECOMZR105A00
    Manufacturer Item:
    CRECOMZR105A00
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Other A/C Equipment CRECOMZR101A00
    Type: Horizontal Economizer - Application: Roof-Top Units - Tonnage: - Volts: - Phase:

    International Comfort Products Commercial CRECOMZR101A00

    Item#:
    CRECOMZR101A00
    Manufacturer Item:
    CRECOMZR101A00
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products Commercial CRECOMZR102A00 Horizontal Economizer Low Leak

    International Comfort Products Commercial CRECOMZR102A00

    Item#:
    CRECOMZR102A00
    Manufacturer Item:
    CRECOMZR102A00
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort

    RXRD-01MDDAM3

    Item#:
    RXRD-01MDDAM3
    Manufacturer Item:
    RXRD-01MDDAM3
    Manufacturer:
    FUJITSU
    |◀ 85 - 96 of 1448 ▶|
    View: