|◀ ◀ 97 - 108 of 1448 ▶ ▶|
View:

Air Handler Apartment Fan Coil Upflow Only 1-1/2 Ton Piston 208/230 R410A 36-1/2" H x 20-1/2" W x 15" D

  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit

    International Comfort Products FMA4X1800AL

    • Item#:
    FMA4X1800AL
    Manufacturer Item:
    FMA4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FMAX COILS
    FMA4X1800AL_Spec

    Air Conditioning Condensing Unit Quiet Performance 1.5 Ton 15 SEER

    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the oz.one
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N4A5S18AKAWA

    • Item#:
    N4A5S18AKAWA
    Manufacturer Item:
    N4A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A5S-ICP-Care_Misc
    N4A5S-ICP_Broc
    N4A5S-ICP_Install
    N4A5S18AKAWA_Spec

    Package Roof Top Unit Gas 3 Ton 36K BTU 14 SEER 460/3 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection


    International Comfort Products Commercial RGV036LEFA0AAA

    • Item#:
    RGV036LEFA0AAA
    Manufacturer Item:
    RGV036LEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    RGVSERIES_Spec

    Evaporator Coil Cased Multipoise 4 Ton Alumium 24-1/2" TXV Installed

    Material  Foil faced insulation material on the inner walls decreases energy loss and eliminates condensation.
  • Cabinets  Painted galvanized steel cabinet is salt spray tested for improved durability and corrosion-resistance.
  • Electric Heat  Can accommodate electric heat with no modification to the cabinet for additional heat on-demand when you need it most.
  • Two stage ECM motor  Indoor blower stages up and down to provide enhanced comfort, energy savings, and superior humidity control.
  • All-Aluminum Coil  With excellent heat transfer, efficiency, and humidity removal, the A-coil is more durable and has a lower chance of refrigerant leakage compared to typical copper coils.
  • Control Board Pocket  A dedicated slot for the control board protects it from humidity in the airstream and extends its lifetime.
  • Integrated Drain Pan - Made from corrosion-resistant composite material, gently sloped to eliminate standing water.
  • Secondary Drain Pan  Flexibility for VT or HZ applications.
  • Filter Rack  Factory reserved, provides convenience for field installation and serviceability.

    Bosch BMAC4248DNTF

    • Item#:
    BMAC4248DNTF
    Manufacturer Item:
    8733947955
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    BMAC4248DNTF_Install
    BMAC4248DNTF_Spec

    Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied


    FXM4X3600AL

    • Item#:
    FXM4X3600AL
    Manufacturer Item:
    FXM4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3600AL_Spec

    Air Handler Multi-Position 2-1/2 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied



    INTERNATIONAL COMFORT PRODUCTS FXM4X3000AL

    • Item#:
    FXM4X3000AL
    Manufacturer Item:
    FXM4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X3000AL_Spec

    Condensing Unit Thru-The-Wall 2-1/2 Ton 19"H x 36"W x 18.5"D

    Above Air HK-OA ceiling mounted high-percentage outdoor-air A/Cs & H/Ps provide a floor saving above-the-ceiling ventilation solution
  • 2-1/2 Ton
  • Height 13"
  • Width 36"
  • Depth 13-1/2"

    ABOVE AIR TECHNOLOGIES VCU-C-030-1-X

    • Item#:
    VCU-C-030-1-X
    Manufacturer Item:
    VCU-C-030-1-X
    Manufacturer:
    ABOVE AIR TECHNOLOGIES

    Evaporator Coil Cased Multipoise 4 Ton Alumium 17-1/2" TXV Installed

    Material  Foil faced insulation material on the inner walls decreases energy loss and eliminates condensation.
  • Cabinets  Painted galvanized steel cabinet is salt spray tested for improved durability and corrosion-resistance.
  • Electric Heat  Can accommodate electric heat with no modification to the cabinet for additional heat on-demand when you need it most.
  • Two stage ECM motor  Indoor blower stages up and down to provide enhanced comfort, energy savings, and superior humidity control.
  • All-Aluminum Coil  With excellent heat transfer, efficiency, and humidity removal, the A-coil is more durable and has a lower chance of refrigerant leakage compared to typical copper coils.
  • Control Board Pocket  A dedicated slot for the control board protects it from humidity in the airstream and extends its lifetime.
  • Integrated Drain Pan - Made from corrosion-resistant composite material, gently sloped to eliminate standing water.
  • Secondary Drain Pan  Flexibility for VT or HZ applications.
  • Filter Rack  Factory reserved, provides convenience for field installation and serviceability.

    Bosch BMAC4248BNTF

    • Item#:
    BMAC4248BNTF
    Manufacturer Item:
    8733947953
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    BMAC4248BNTF_Install
    BMAC4248BNTF_Spec

    Bosch Heat Pump Condensing Unit Inverter 5 Ton 18 SEER R410A 208/230/1

    Features
  • Intelligent control features help adjust the output capacity, allowing the unit to keep the temperature and humidity at your desired levels without fluctuation
  • The high efficiency variable capacity inverter compressor can adjust to any speed between 33% and 110% (in1% increments) to perfectly cool and heat your home using minimal energy for maximum comfort
  • 1-1/2 or 2 ton cooling capacity - 20,000 BTU's to 24,000 BTU's heating capacity
  • The air coil design provides exceptional heat transfer and low air resistance
  • Direct drive fan blades provide vortex suppresion to reduce sound of airflow exiting the condenser giving sound levels as low as 56 dB
  • Condensers include an electronic expansion valve (EEV) to ensure proper refrigerant flow during all conditions
  • Compressor liquid return protection - Compressor high or low compression ratio protection - Compressor high temperature protection - High / low voltage protection and over current protection - IPM and electronic control board high temperature protection

    Bosch BOVB-60HDN1-M18M

    • Item#:
    BOVB-60HDN1-M18M
    Manufacturer Item:
    8-733-955-037
    Manufacturer:
    BOSCH THERMOTECHNOLOGY CORP
     
    SV-SERIES-BOSH_Broc

    Air Handler Multi-Position 1-1/2 Ton 208/230 TXV R410A ECM Motor 49-5/8" H x 17-5/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied

    INTERNATIONAL COMFORT PRODUCTS FXM4X1800AL

    • Item#:
    FXM4X1800AL
    Manufacturer Item:
    FXM4X1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FXM4X_Install
    FXM4X1800AL_Spec

    Window Air Conditioning Thru-The Wall Unit 18K BTU 230 VAC W/11,000 Electric Heat

    Friedrich WET16A33A Thru-The Wall Unit 18K BTU 230 VAC,

    WET16A33A

    Item#:
    WET16A33A
    Manufacturer Item:
    WET16A33A
    Manufacturer:
    FRIEDRICH AIR CONDITIONING CO.
     
    WET16A33A_Broc

    Item#:
    RGV036HEFA0AAA
     
    Commerical-Rooftop_Broc
    |◀ ◀ 97 - 108 of 1448 ▶ ▶|
    View: