• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening

Advance Distributers BCRMA3124-S03

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening

Advance Distributers BCRMB6136-S03

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening

Advance Distributers BCRMB6136-S01

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP eXpansion valve available factory installed, eXpansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 10" width X 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number
• 0 and 5 kw, hot water standard stripped wire
• 20-1/2" width X 21" depth supply duct opening
• 17-3/4" width X 22" depth return duct opening

Advance Distributers BCRMD1660-S3N4

• 3 Ton 15 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  ,
  

  Bosch BVA-36WN1-M15

Bosch BVA-36WN1-M20

Bosch BVA-24WN1-M15

Bosch BVA-24WN1-M20

• 4 Ton 15 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  ,
  

  Bosch BVA-48WN1-M15

• 4 Ton 20 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  ,
  

  Bosch BVA-48WN1-M20

• 5 Ton 15 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  ,
  

  Bosch BVA-60WN1-M15