REFRIGERATION CIRCUIT

Copeland Scroll compressors on all models

Filterdrier supplied with every unit for field installation

External high and low refrigerant service ports

Copper tube / aluminum fin coil PERFORMANCE

Communicating, selfconfiguring operation when used with Observer Wall Control (TSTAT0201CW)

Outdoor temperature sensor factory installed

Compressor sound blanket standard

Isolation compressor grommets EASY TO INSTALL AND SERVICE

Text based diagnostics with Observer Communicating Wall Control

Easy access service valves on all models

Innovative control box design

High and low pressure switches

Only two screws to access control panel

Factory charged with R410A refrigerant BUILT TO LAST

High gloss, bakedon powder coat finish over galv. steel

Postpainted (black) coil fins

Coated, weatherresistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

International Comfort Products TSA660GK

REFRIGERATION CIRCUIT

Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%

High pressure switch

Suction pressure transducer

Pressure equalizer valve for easy starting

Compressor discharge temperature sensor

Coil temperature sensor

Copper tube/aluminum fin coil PERFORMANCE

Up to 13.0 EER

Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control

Observer Wall Control with version 5.0 or newer software required

Also capable of 2stage operation with 2stage thermostat

Selfconfiguring installation with Observer Communicating Wall Control

Compact ECM fan motor driven by integrated inverter control

Outdoor temperature sensor factory installed

Highperformance compressor sound shield standard

Isolation compressor grommets

Enhanced dehumidification EASY TO INSTALL AND SERVICE

Text based diagnostics with Observer Communicating Wall Control

Only 2 control wires required from communicating indoor unit to condenser

External high and low refrigerant service ports

Factory charged with R410A refrigerant

Adjustments for min and max staging with Observer Wall Control BUILT TO LAST

High gloss, bakedon powder coat finish over galvanized steel

Postpainted (black) coil fins

Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)

Corner posts for extra strength and style

International Comfort Products TVA948GKA

REFRIGERATION CIRCUIT

Variable speed compressor operates at 5 stages with capacity range from as wide as 25  100%

High pressure switch

Suction pressure transducer

Pressure equalizer valve for easy starting

Compressor discharge temperature sensor

Coil temperature sensor

Copper tube/aluminum fin coil PERFORMANCE

Up to 13.0 EER

Integrated inverter control enables 5stage operation with complete Observer communicating system including Observer control

Observer Wall Control with version 5.0 or newer software required

Also capable of 2stage operation with 2stage thermostat

Selfconfiguring installation with Observer Communicating Wall Control

Compact ECM fan motor driven by integrated inverter control

Outdoor temperature sensor factory installed

Highperformance compressor sound shield standard

Isolation compressor grommets

Enhanced dehumidification EASY TO INSTALL AND SERVICE

Text based diagnostics with Observer Communicating Wall Control

Only 2 control wires required from communicating indoor unit to condenser

External high and low refrigerant service ports

Factory charged with R410A refrigerant

Adjustments for min and max staging with Observer Wall Control BUILT TO LAST

High gloss, bakedon powder coat finish over galvanized steel

Postpainted (black) coil fins

Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)

Corner posts for extra strength and style

International Comfort Products TVA936GKA

VCU-T-SLV01 Above Air Tall Series Sleeve

Above Air Technologies VCU-T-SLV01

Fujitsu FH4824TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH4824TPSJSN

REFRIGERATION CIRCUIT

Copeland Scroll Ultratecht compressors on all models

Crankcase Heater factory installed

Suction line accumulator factory installed

Bi- flow filter- drier included for field installation

Integrated solid state control with Time- Temperature Defrost

High and low pressure switches

Discharge gas thermostat

Copper tube / aluminum fin coil PERFORMANCE

Self configuring installation capabilities with Observer Communicating Wall Control

Outdoor temperature sensor factory installed

Ball Bearing PSC Fan Motors on all models

High performance compressor sound shield standard

Isolation compressor grommets
EASY TO INSTALL AND SERVICE

Text based diagnostics with Observer Communicating Wall Control

Only 2 control wires required from communicating indoor unit to condenser

Easy access service valves on all models

Innovative control box design

External high and low refrigerant service ports

Only two screws to access control panel

Factory charged with R- 410A refrigerant
BUILT TO LAST

High gloss, baked- on powder coat finish over galvanized steel

Post- painted (black) coil fins

Coated, weather- resistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection (hail guard)

Corner posts for extra strength and style

International Comfort Products

Tempstar TCH636GK

Mars Universal Remote will operate with virtually any mini-split produced in any region of the world. Programming is accomplished by imputing your mini-split brand code or use the easy and intuitive self learn mode to set-up the remote to operate your mini-split. Operates with 2 AAA batteries..

Motors & Armatures 65775

Advance Distributers BCRMB6136-S01 Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 48000BTU, 4 Ton, 20 kw, 115 VAC

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening

,
,

Advance Distributers BCRMC3148-S03

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TTSASN

Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC

• Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  ,
  

  Thermo Pride AH2436AE1

Thermo Pride AH4260AE1 Air Handler Hydro 3-1/2-5 Ton ECM Motor115 VAC

• Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  ,
  

  Thermo Pride AH4260AE1

Advance Distributers BCRMA3124-S03 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 120 VAC

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening

,

Advance Distributers BCRMA3124-S03