Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW

208/230-1-60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

Puron Advance refrigerant, TXV standard

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW

208/230-1-60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

Puron Advance refrigerant, TXV standard

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW

208/230-1-60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

Puron Advance refrigerant, TXV standard

MULTIFAMILY CEILING MOUNT FAN COIL

FMU5Z and FMC5Z 1-1/2, 2, 2-1/2, and 3 Tons

FMU5X and FMC5X 1-1/2, 2, 2-1/2, and 3 Tons All Models

Horizontal application only

Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW

40VA, 208/230V-1-60 transformer

All models use R-454B refrigerant and have a hard-shutoff TXV metering device

Adjustable condensate drain pan FM(C,U)5X, FM(C,U)5Z

Horizontal return applications require field fabricated bottom cover

Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193

Cabinets insulated to prevent cabinet sweating

Refrigerant lines and electrical connections can be run out the back or side of casing Performance

PSC motor on all FMU5X & FMC5X models

ECM motor on all FMU5Z & FMC5Z models Easy To Install Service

A-coil design for maximum surface area

Multiple electrical, refrigerant lineset and drain line entry for application flexibility

Primary and secondary drain connections exit from the back or side of the cabinet

Supports furred-down ceiling open return and ducted return applications

Sweat connections for long term reliability

Grooved aluminum tube / aluminum fin coils on FMU5X, FMC5X, FMC5Z, and FMU5Z models with AL in the 10th & 11th position

1-1/2, 2, 2-1/2, and 3 Tons

Upflow application only

Accessory field-installed electric heat kits available in 5, 7.5, or 10 kW

208/230-1-60 supply voltage

Cabinet exterior is galvanized sheet metal

Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

Insulated for conditioned space (not to be installed in unconditioned spaces)

All Aluminum coils

Puron Advance refrigerant, TXV standard

Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40VA, 208/230V-1-60 transformer
All models use Puron Advance, R-454B refrigerant and have a hard-shutoff TXV metering device
Adjustable condensate drain pan

Advance Distributers Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 48000 BTU, 4 Ton, 20 kw, 115 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening
  

Fujitsu FB17TSJ07NB Air Handler 1-1/2-2 Ton R410A 208/230 VAC 7 KW 17" Wide

ndustry Standard R-410A Refrigerant
• Models featuring Electric Heat without Indoor CoolingCoil
• Quiet and efficient X-13 (ECM) motor technology
• Only 35" tall and 4-way convertible for all those tight spaces
• Available from factory in upflow and horizontal configurations
• Nominal airflow up to 0.5" eXternal static pressure with reduced airflow up to 1.0" eXternal static pressure
• Factory installed MultiFleX coils
• Sturdy steel construction with 1" [25.4 mm] of foil faced insulation for eXcellent sound and insulating characteristics
• Permanent, easily accessible and washable filter furnished standard
• Circuit breaker (standard on units with more than 11 kW) meets U.L. and cUL requirements for service disconnect
• Factory installed auXiliary electric heat provides eXact heat for indoor comfort over a variety of applications
• Fan settings for selectable, customized cooling airflow over a wide variety of applications
• Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE standard 193,
  

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  Thermo Pride AH2436AE1
  

Thermo Pride AH4260AE1 Air Handler Hydro 3-1/2-5 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,