S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
Item#:
24HCXW2V10AVB00AAF
Manufacturer Item:
6024W2V10AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
Item#:
24HCXW2010AVB00AAF
Manufacturer Item:
6024W2010AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
Item#:
30HCXW2010AVB00AAF
Manufacturer Item:
6030W2010AVB00AAF
Manufacturer:
FIRST CO.
Multi-function micro-processor circuit board with these standard features:
Blower start relay - Eliminates field installed boiler relay, allowing direct wiring from the boiler to the air
handler
Blower-on fan delay - (heating mode) - preheats the HW coil for 45 seconds.
Blower-off fan delay - (heating and cooling models) - blower continues to operate for 45 seconds after
thermostat is satisfied, for increased efficiency
120V or 24V zone valve control - The micro-pro-cessor powers either 120V or 24V field supplied
motorized zone valves
Factory or field installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
Manual Air Vent on hot water coil
Blower door shut-off switch (except 60/61HCXW (PSC))
Slide out hot water coil for easier service
Copper tube heating and cooling coils
Compatible with all major brands of split condensing units and heat pumps
Attractive baked-on powder coated cabinet
Primary and secondary condensate drain connections
Easily accessible 1 filter
Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
Item#:
36HCXW2010AVB00AAF
Manufacturer Item:
6036W2010AVB00AAF
Manufacturer:
FIRST CO.
Evaporator Coils 921482
Cased/Uncased: Uncased - Tonnage: 3 - refrigerant: R22/R410A - Configuration: - Coil Type: A-Coil
Cased/Uncased: Uncased - Tonnage: 3 - refrigerant: R22/R410A - Configuration: - Coil Type: A-Coil
Item#:
921482
Manufacturer Item:
921482
Manufacturer:
NORTEK GLOBAL-(PHILCO PLUS)
Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort
Item#:
9900826079
Manufacturer Item:
9900826079
Manufacturer:
FUJITSU
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC42A24-210L-059
Manufacturer Item:
CC42A24-210L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC60A24-245L-059
Manufacturer Item:
CC60A24-245L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC30A24-145L-059
Manufacturer Item:
CC30A24-145L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC48A24-210L-059
Manufacturer Item:
CC48A24-210L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC30A24-175L-059
Manufacturer Item:
CC30A24-175L-059
Manufacturer:
ASPEN MFG. LLC
STANDARD SPECIFICATIONS
Rifled copper tubing, enhanced aluminum fins.
Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.
Left- or right-hand refrigerant and plumbing connections.
Liquid line - 3/8 ODS, suction line - 3/4 ODS on 1-1/2- 3 ton & 7/8 ODS on 3-1/2 - 5 ton.
Externally mounted flowrater body with Schrader valve for hiss-testing.
Heavy duty plastic drain pans on most models.
Upflow without field modification. Downflow applications require plate kit, included.
AHRI certifiable with all brands of A/C and heat pump systems.
ETL listed for use with both R-22 and R-410a when proper metering device is used.
Ten-year limited warranty
Item#:
CC24A24-145L-059
Manufacturer Item:
CC24A24-145L-059
Manufacturer:
ASPEN MFG. LLC