S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Room BTU Calculator
Select the room conditions to determine the required BTU.
BTU Result
International Comfort Products PHB448000L000B
Item#:
PHB448000L000B
Manufacturer Item:
PHB448000L000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Proven quality construction
Next-generation, high-efficiency blower
delivers reduced energy consumption
Advanced fan design and vibration-reducing
technology minimize noise for peace and quiet
Stainless-steel heat exchanger
Durable powder-coat paint is 1,000-hour
salt-spray rated and in a sleek new color
15.2 SEER2 models meet CEE Tier 1
eligibility requirements for 25C Federal
TSingle- and three-phase models available for
residential and light-commercial applications
Individual panels and front-facing components
for easy access
Convertible airflow design allows upflow,
downflow or horizontal applications
Easy-to-read, color-coded wiring diagramsax Credits and other rebates/incentives
Item#:
PG3E30L07S21
Manufacturer Item:
PG3E30L07S21
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Item#:
PHB424000K000B
Manufacturer Item:
PHB424000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB442060H000B
Manufacturer Item:
PGB442060H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Faster comfort
Next-generation high-efficiency blower
delivers reduced energy consumption.
Consistent comfort
High-efficiency standard ECM motor ensures dependable air distribution.
Quiet comfort
Advanced fan design and vibration-reducing technology minimizes noise to provide you with the peace and quiet you expect from YORK
Dependable comfort
Stainless steel heat exchanger provides long
life and optional lifetime warranty*.
All-aluminum indoor coil resists corrosion to extend operating life.
Robust compressor provides dependable, long-lasting operation.
Durable, corrosion-resistant materials and finish - the
cabinet is finished with powder coat paint subjected
to 750-hour salt spray tests. Galvanized steel base
rails protect your unit from the elements.
Extruded steel louvers add strength and
stability for added durability.
Item#:
PCG4A360753X4
Manufacturer Item:
PCG4A360753X4
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
International Comfort Products PHB442000K000B
Item#:
PHB442000K000B
Manufacturer Item:
PHB442000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products PHB436000H000B
Item#:
PHB436000H000B
Manufacturer Item:
PHB436000H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
PHB460000K000B
Item#:
PHB460000K000B
Manufacturer Item:
PHB460000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Proven quality construction
Next-generation, high-efficiency blower
delivers reduced energy consumption
Advanced fan design and vibration-reducing
technology minimize noise for peace and quiet
Stainless-steel heat exchanger
Durable powder-coat paint is 1,000-hour
salt-spray rated and in a sleek new color
15.2 SEER2 models meet CEE Tier 1
eligibility requirements for 25C Federal
TSingle- and three-phase models available for
residential and light-commercial applications
Individual panels and front-facing components
for easy access
Convertible airflow design allows upflow,
downflow or horizontal applications
Easy-to-read, color-coded wiring diagramsax Credits and other rebates/incentives
Item#:
PG3E60L12S21
Manufacturer Item:
PG3E60L12S21
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
Proven quality construction
Next-generation, high-efficiency blower
delivers reduced energy consumption
Advanced fan design and vibration-reducing
technology minimize noise for peace and quiet
Stainless-steel heat exchanger
Durable powder-coat paint is 1,000-hour
salt-spray rated and in a sleek new color
15.2 SEER2 models meet CEE Tier 1
eligibility requirements for 25C Federal
TSingle- and three-phase models available for
residential and light-commercial applications
Individual panels and front-facing components
for easy access
Convertible airflow design allows upflow,
downflow or horizontal applications
Easy-to-read, color-coded wiring diagramsax Credits and other rebates/incentives
Item#:
PG3E24L07S21
Manufacturer Item:
PG3E24L07S21
Manufacturer:
BHC RESIDENTIAL AND LIGHT COMM
REFRIGERATION CIRCUIT
Environmentally sound R410A refrigerant
Scroll compressor standard on all models
Copper tube/aluminum fin condenser and evaporator coils
Dehumidification mode (airflow reduction) on all models
EASY TO INSTALL AND SERVICE
Installs easily on a rooftop or at ground level
Easy threepanel accessibility for maintenance and installation
Easily converts to down discharge applications
Combination gas heating, heat pump heating, and electric cooling
Low NOx units available
BUILT TO LAST
Hail guard (3/8 spacing) wire grilles standard on PDS models (2 spacing wire grilles on PDD models)
Induceddraft combustion and venting
Prepainted steel cabinet
Aluminized steel tubular heat exchanger on PDD4 models, Stainless Steel tubular heat exchanger on PDS4 models
Direct spark ignition
High efficiency ECM indoor blower motor on all models
Vertical condenser fan discharge
Full perimeter steel base rails
High and low pressure switches provide added reliability for the compressor
PDS4 models come with tincoated copper evaporator coil standard
PDD430060K000K
Item#:
PDD430060K000K
Manufacturer Item:
PDD430060K000K
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products PHB448000K000B
Item#:
PHB448000K000B
Manufacturer Item:
PHB448000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS