Copperfield Forever Flex Is a premium chimney lining system custom made for the installer. The liner is 316Ti and all components involved in venting the gas are made out of matched metal. Just another detail that makes this the best kit in the world.
For Standard Forever Flex components 316Ti-Alloy Stainless Steel Works for all fuel types: wood, pellet, oil, non-condensing gas, and cOverall Length Highly-flexible liner Long-lasting, durable construction Secure connections to prevent leaks, drafts, and drips No additional hardware needed For Standard Forever Flex components 316Ti-Alloy Stainless Steel Works for all fuel types: wood, pellet, oil, non-condensing gas, and cOverall Length Highly-flexible liner Long-lasting, durable construction Secure connections to prevent leaks, drafts, and drips No additional hardware needed

Copperfield Chimney KST635

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer
  
  

  Hart & Cooley 10RP5

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer
  
  

  Hart & Cooley 12RS

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer
  
  

  Hart & Cooley 12REA45

Z-Flex 2SVEPWCF31 Single-Wall Pipe 3" x 112" Stainless Steel
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,

Z-Flex 2SVEPWCF31

Z-Flex Z-Vent 2SVEPWCF0305 Single-Wall Pipe 3" x 60" Stainless Steel

• Gasketed connections
• Fusion welded pipe seams
• No sealant required, no cure time, or no call backs
• Air tight seam, smooth finish, better fit
• Metallic special gas vent cut to length on site (single wall version) saves time and lowers cost.
• Highest pressure rating in the industry greater than five time the industry standard,
  
  
  

  Z-Flex 2SVEPWCF0305

Z-Flex 2SVEPWCF0402 Single-Wall Pipe 4" x 24" Stainless Steel
Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.,

Z-Flex 2SVEPWCF0402

Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel

Deep locking groove assures solid joint and secure lock
• Corrosion resistant aluminum inner wall for rapid warm-up
• Unique locking band provides 360 deg turning radius of the pipe and fittings
• Locking band slides over tabs easily, locks firmly without twisting
• Locking tabs hold pipe securely together, can be easily unlocked
• Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
• Reinforced ends curled bead on end of outer pipe for rigidity and strength
• The allowable minimum clearance to combustibles is 1"
• A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
  
  

  Hart & Cooley 3RGS