Roth 2350000999 Ventalarm

Unless another UL approved system for fill level detection is used, all tanks must have a vent alarm (whistle) installed
• We require the use of our proprietary vent alarm in each tank
• This vent alarm also provides a 2" NPT adapter for easy connection of your vent piping to the tank
• The Roth vent alarm is installed in place of 1 of the plastic adapters in the top of the tank
• Use the cap nut and a #3 gasket (already supplied with the Roth vent alarm) to secure the vent alarm in the manner described in the Roth EcoDWT plus 3 installation instruction manual
  
  

  Roth 2350000999

Roth 2315107012 Expansion Kit for 400L, 620L and 1000L Model Double-Wall,

Roth 2315107012

Roth 2335100757 Tank Cover For Double Wall Oil Storage Tank

The Roth tank cover is designed and tested for outdoor installations
• This cover is designed to protect the top of the tank from both mother natures weather elements as well as harmful ultraviolet rays
• The cover length and width are not more than 0.5" greater than the overall length and width of the tank, it is designed for the cover height is 12" for all models
• Assembles and installs quickly with stainless steel screws
• Fastens to tank lip with self-tapping screws provided
• Knock-outs on both ends and back for fuel oil supply lines
• Required for outdoor tank installations
• May be used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The installation fit contains the assembly sheet, the warning label, screws to assemble the cover and secure it to the tank, the blind plugs to fill unused knock-out holes, and the lanyards with pins to secure the cover in the closed position
  
  

  Roth 2335100757

Roth 2315001002 Installation Kit for 620L, 1000L Double-Wall Oil Storage,

Roth 2315001002

The Roth DWT tanks are equipped with a visual leak indicator located in-between the walls. A tripped leak indicator is a sign of oil in the interstitial area of the tank, but does not necessarily mean the inner bottle has failed. The lowest point on the top of the tank is the penetration for the leak indicator. The leak indicator sits in a rubber grommet, supplied with the leak indicator. It takes less than a cup of oil to cause the oil sensitive packing located at the bottom of the leak alarm shaft to swell and raise the red alarm designator. When tripped, the presence of oil has to be determined, cleaned up and the leak indicator needs to be replaced.

Roth 2335000889

Roth 2335100749 Tank Cover for 400L and 620L Double Wall Oil Storage Tank

The Roth tank cover is designed and tested for outdoor installations
• This cover is designed to protect the top of the tank from both mother natures weather elements as well as harmful ultraviolet rays
• The cover length and width are not more than 1/2" greater than the overall length and width of the tank, it is designed for the cover height is 12" for all models
• Assembles and installs quickly with stainless steel screws provided
• Fasten to tank lip with self-tapping screws provided
• Knockouts on both ends and back for fuel oil supply lines
• Required for outdoor tank installations
• May be used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The installation fit contains the assembly sheet, the warning label, screws to assemble the cover and secure it to the tank, the blind plugs to fill unused knock-out holes, and the lanyards with pins to secure the cover in the closed position
  
  

  Roth 2335100749

Roth 2335003721 18 ga Steel Tank Cover for 1000LH Double Wall Lubrication Oil Tanks

Roth 2335003721

Roth 2350000031 Gasket for Roth DWT Safety Double Wall Oil Storage Tank, #3

Roth 2350000031

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.

Roth 2335000191

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model

Roth 2335003411

Roth 2335002054 Tank Cover for 1500L Double Wall Lubrication Oil Tanks

Assembles and installs quickly with stainless steel screws
• Fastens to tank lip with self-tapping screws
• Knockouts on both ends and back (total of 4) for fuel oil supply lines
• Cover is designed to protect the top of the tank from both mother nature's weather elements as well as harmful ultraviolet rays
• Cover is designed and tested for outdoor installations
• Used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The cover length and width are not more than 0.5" greater than the overall length and width of the tank
  
  

  Roth 2335002054