Scully Unifill Straight Adapter 2",
,

Scully Signal 04328

Scully Signal 04317 Raised Flush Box Cap 2",
,

Scully Signal 04316

Beckett Parts 14515 Fill Vent Alarm 2" x 1-1/2", 2" x 1-1/2",
,

Beckett Parts 14045

Roth 2315105343 Front to Back Expansion Kit for DWT 275 Gallon Double-Wall Oil Storage Tank, #3

,
,

Roth 2315001002

OME International 22AS Black Pigtail 1/4" x 90 Degree,
,

OME International 22AS

Roth 2335100222 Tie Down Kit for 620L and 1000L Double-Wall Oil Storage Tank

• Clips over top rim of tank
• Base bolts to floor/concrete
• Tumbuckles adjust tension
• Use 1-kit in low risk areas
• Use multiple kits in high risk areas

,

,

Roth 2335003723

Roth 2335100757 Tank Cover For Double Wall Oil Storage Tank

• The Roth tank cover is designed and tested for outdoor installations
• This cover is designed to protect the top of the tank from both mother natures weather elements as well as harmful ultraviolet rays
• The cover length and width are not more than 0.5" greater than the overall length and width of the tank, it is designed for the cover height is 12" for all models
• Assembles and installs quickly with stainless steel screws
• Fastens to tank lip with self-tapping screws provided
• Knock-outs on both ends and back for fuel oil supply lines
• Required for outdoor tank installations
• May be used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The installation fit contains the assembly sheet, the warning label, screws to assemble the cover and secure it to the tank, the blind plugs to fill unused knock-out holes, and the lanyards with pins to secure the cover in the closed position

,
,

Roth 2335100749

Roth 2335002054 Tank Cover for 1500L Double Wall Lubrication Oil Tanks

• Assembles and installs quickly with stainless steel screws
• Fastens to tank lip with self-tapping screws
• Knockouts on both ends and back (total of 4) for fuel oil supply lines
• Cover is designed to protect the top of the tank from both mother nature's weather elements as well as harmful ultraviolet rays
• Cover is designed and tested for outdoor installations
• Used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The cover length and width are not more than 0.5" greater than the overall length and width of the tank

,

,

Roth 2335001863

Roth 2335100749 Tank Cover for 400L and 620L Double Wall Oil Storage Tank

• The Roth tank cover is designed and tested for outdoor installations
• This cover is designed to protect the top of the tank from both mother natures weather elements as well as harmful ultraviolet rays
• The cover length and width are not more than 1/2" greater than the overall length and width of the tank, it is designed for the cover height is 12" for all models
• Assembles and installs quickly with stainless steel screws provided
• Fasten to tank lip with self-tapping screws provided
• Knockouts on both ends and back for fuel oil supply lines
• Required for outdoor tank installations
• May be used for multiple tank installations with separate fill and vent lines when fuel oil supply lines are manifolded outside the covers
• The installation fit contains the assembly sheet, the warning label, screws to assemble the cover and secure it to the tank, the blind plugs to fill unused knock-out holes, and the lanyards with pins to secure the cover in the closed position

,
,

Roth 2335100222

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.,
,

Roth 2315107012

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.,
,

Roth 2335002054

Roth 2335003721 18 ga Steel Tank Cover for 1000LH Double Wall Lubrication Oil Tanks

• ,
  ,
  
  
  
  

  Roth 2335003411