Brand Name
Type
Fuel Type
BTU Input
BTU Output
AFUE
Voltage
Phase
|◀ ◀ 37 - 48 of 63 ▶ ▶|
View:

Hot Water/Steam Heater Propeller Type 33K BTU 120 VAC

Modine HS-33S Power-Throw Hot Water/Steam Unit Heater, 33000 BTU Steam, 630 cfm, Horizontal Mounting
    This permits the units to be rotated 360 deg without piping change
  • This permits the units to be installed in low clearance areas
  • Units have a 2-piece casing for easy coil access
  • Tapped holes for suspension by threaded rod
  • Serpentine copper tube coil design has high resistance to thermal shock, even under high steam pressures
  • Absence of coil headers eliminates potential leaks and increases coil face area without increasing overall size of unit
  • Coil designed for greater water carrying capacity with lower friction loss
  • Standard coil type
Item#:
HS-33S
Manufacturer Item:
HS33S 01 PACK
Manufacturer:
MODINE MFG COMPANY
 
Modine-HS-HSB-Catalog_Misc
Modine-HS-HSB_Install

Unit Heater Gas Fired 300K BTU 120 VAC

Modine PDP300AE0130SBAN Unit Heater Gas Fired 300K BTU 120 VAC,
Item#:
PDP300AE0130SBAN
Manufacturer Item:
PDP300AE0130SBAN
Manufacturer:
EMERSON-SWAN INC
 
Modine-Catalog_Misc

Unit Heater Oil 231k BTU 120 VAC Propeller Type

Modine model POR oil-fired unit heaters offer an efficient and reliable means of heating, particularly in regions where supplies of other fuels, such as natural gas, may be unavailable, undependable, or interruptible. The units are direct driven propeller fan type units designed for overhead suspension and horizontal delivery of heated air.
    Advanced burner and burner controls
  • Durable attractive casing design
  • Quiet, efficient and safe air mover
  • Effective heat throw
  • Superior heat exchanger life expectancy
  • Efficient combustion
  • Easy installation
  • Reduced maintenance, easy to service
  • Protects the burner pump from excessive line pressure
  • Fuel oil filter protects oil burner from foreign particles
  • Vertical louvers used in combination with standard horizontal louvers for complete control of air delivery
  • Draft regulator barometric type with screw adjustments and hinge-pin action
  • Includes adapter, gaskets, vacuum relief valve, outside intake air hood and other miscellaneous hardware
  • 54 deg F temperature rise
Item#:
POH185A
Manufacturer Item:
POR185A0101
Manufacturer:
MODINE MFG COMPANY
 
POR_INTSALL

Unit Heater Gas Fired S/S 200K BTU 120 VAC 80% AFUE Power Vented

Modine PTP200SS0111 Unit Heater Gas Fired S/S 200K BTU 120 VAC,
Item#:
PTP200SS0111
Manufacturer Item:
PTP200SS0111
Manufacturer:
MODINE MFG COMPANY
 
Modine-PTP-Catalog_Broc
Modine-PTP_Install

Unit Heater Natural Gas Power Vented 45K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-45
    Manufacturer Item:
    UDAP-45
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 400K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-400
    Manufacturer Item:
    UDXC-400
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 300K BTU 83% 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves


    • Item#:
    UDX-300
    Manufacturer Item:
    UDX-300
    Manufacturer:
    REZNOR LLC
     
    UDX-300

    Unit Heater Natural Gas Power Vented 75K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-75
    Manufacturer Item:
    UDXC-75
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 60K 83% AFUE 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-60
    Manufacturer Item:
    UDXC-60
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 175K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-175
    Manufacturer Item:
    UDAP-175
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 30K BTU 83% 120 VAC

  • Power-vented low-static axial fan (model UDXC)
  • High-static blower fan (model UBXC)
  • 14 sizes from 30,000 to 400,000 BTUh optimize cost and capacity
  • 82 to 83% thermal effi ciency
  • Natural gas standard (propane conversion kit available)
  • External gas connection for easier installation
  • Sealed control compartment houses all electrical components
  • Field convertible to separated-combustion using added kit
  • TCORE2® titanium-stabilized aluminized-steel heat exchanger
  • Certifi ed for commercial/industrial heating applications (all UBXC sizes and only UDXC sizes 30 to 400)
  • Approved use in residential garages and workshops (only UDXC sizes 30 to 125)
    • Item#:
    UDXC-30
    Manufacturer Item:
    UDXC-30
    Manufacturer:
    REZNOR LLC
     
    UDXC-Reznor_Broc

    Unit Heater Natural Gas Power Vented 400K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)
    • Item#:
    UDAP-400
    Manufacturer Item:
    UDAP-400
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec
    |◀ ◀ 37 - 48 of 63 ▶ ▶|
    View: