Brand Name
Type
Fuel Type
BTU Input
BTU Output
AFUE
Voltage
Phase
View:
  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ÂĽ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves
  • Item#:
    UDX-400
    Manufacturer Item:
    UDX-400
    Manufacturer:
    REZNOR LLC
  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ÂĽ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves



    UDX-250


    UDX-250

  • Item#:
    UDX-250
    Manufacturer Item:
    UDX-250
    Manufacturer:
    REZNOR LLC
  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ÂĽ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves
  • Item#:
    UDX-150
    Manufacturer Item:
    UDX-150
    Manufacturer:
    REZNOR LLC
  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ÂĽ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves



    UDX-75


    UDX-75

  • Item#:
    UDX-75
    Manufacturer Item:
    UDX-75
    Manufacturer:
    REZNOR LLC
    Modine PDP400AE0130 Baked-On Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage Gas Fired High Efficiency Power Vented Propeller Unit Heater, 400000 BTU
    • 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions

    ,



    Modine 832-40


    Modine 832-40

    Item#:
    832-40
    Manufacturer Item:
    43718
    Manufacturer:
    MODINE MFG COMPANY
    Modine PDP350AE0130 Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage High Efficiency Power Vented Natural Gas Fired Unit Heater, 350000 BTU Input, 280000 BTU Output
    • 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
    • The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use and offer excellent in-service economy
    Sid Harvey Item #:832-39: Replaces Part #:'s : L96-841,



    832-39


    832-39

    Item#:
    832-39
    Manufacturer Item:
    PDP350AE0130
    Manufacturer:
    MODINE MFG COMPANY
    Modine PDP300AE0130SBAN Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage High Efficiency Power Vented Natural Gas Fired Unit Heater, 300000 BTU Input, 240000 BTU Output
    • 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
    • The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use and offer excellent in-service economy
    Sid Harvey Item #:832-38: Replaces Part #:'s : L96-840
    ,
    ,



    Modine 832-38


    Modine 832-38

    Item#:
    832-38
    Manufacturer Item:
    43716
    Manufacturer:
    MODINE MFG COMPANY
    Modine PDP250AE0130 Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage High Efficiency Power Vented Natural Gas Fired Unit Heater, 250000 BTU Input, 200000 BTU Output
    • 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
    • The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use and offer excellent in-service economy
    Sid Harvey Item #:832-37: Replaces Part #:'s : L96-839
    ,
    ,



    Modine 832-37


    Modine 832-37

    Item#:
    832-37
    Manufacturer Item:
    43715
    Manufacturer:
    EMERSON-SWAN INC
    Modine PDP200 Power-Exhausted Propeller Natural Gas Fired Unit Heater, 200000 BTU Input, 160000 BTU Output
    • 80% thermal efficiency for fuel savings
    • Light-weight, easily installs 1" from ceiling with only two angle bracket
    • Install quickly and easily with knockouts for quick access to gas and electricity
    • The standard power exhauster allows the unit to be vented vertically or horizontally and is designed to use the smallest diameter vent pipe possible
    • Permanently-lubricated motor for trouble-free dependability
    • 10 years warranty on heat exchanger
    Sid Harvey Item #:832-36: Replaces Part #:'s : L96-838,
    ,



    Modine 832-36


    Modine 832-36

    Item#:
    832-36
    Manufacturer Item:
    43714
    Manufacturer:
    MODINE MFG COMPANY
    Modine PDP175 Power-Exhausted Propeller Natural Gas Fired Unit Heater, 175000 BTU Input, 140000 BTU Output
    • 80% thermal efficiency for fuel savings
    • Light-weight, easily installs 1" from ceiling with only two angle bracket
    • Install quickly and easily with knockouts for quick access to gas and electricity
    • The standard power exhauster allows the unit to be vented vertically or horizontally and is designed to use the smallest diameter vent pipe possible
    • Permanently-lubricated motor for trouble-free dependability
    • 10 years warranty on heat exchanger
    Sid Harvey Item #:832-35: Replaces Part #:'s : L96-837,
    ,



    Modine 832-35


    Modine 832-35

    Item#:
    832-35
    Manufacturer Item:
    43713
    Manufacturer:
    MODINE MFG COMPANY
    Modine PDP150AE0130 Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage High Efficiency Power Vented Natural Gas Fired Unit Heater, 150000 BTU Input, 120000 BTU Output
    • 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
    • The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use and offer excellent in-service economy
    Sid Harvey Item #:832-34: Replaces Part #:'s : L96-836,
    ,



    Modine 832-34


    Modine 832-34

    Item#:
    832-34
    Manufacturer Item:
    43712
    Manufacturer:
    MODINE MFG COMPANY
    Modine's Hot Dawg is widely recognized as the industry's most popular residentially-certified gas-fired unit heater. It is an ideal solution for residential garages and workshops, along with light commercial or industrial applications.
    • Use your workspace - comfortably - year-round
    • Only Modine offers numerous colors and appearance kits, letting you heat your space in style
    • Free up more workspace by getting rid of space heaters that clutter up the area
    • Quieter garage with the hot dawg thanks to noise levels less than other units
    • Trouble-free motor dependability
    • Simplified side-wall or roof venting with small-diameter vent pipes
    • Tubular power vented propeller unit
    • Hush-puppy quiet operation
    • 10 years warranty on heat exchanger
    • Lightweight, easy installation 1" from ceiling
    • Power vented model simplifies side-wall or roof venting with small-diameter vent pipe
    • Permanently lubricated motor
    • Controls can be either single or 2-stage, direct spark ignition, 100% shut-off with continuous retry
    • Aluminized heat exchanger

    ,

    ,



    Modine HD125LP


    Modine HD125LP

    Item#:
    HD125LP
    Manufacturer Item:
    HD125AS0121
    Manufacturer:
    MODINE MFG COMPANY
    View: