Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ ◀ 181 - 192 of 333 ▶ ▶|
View:

QuietComfort 96 Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Gas Furnace 80K BTU 96% AFUE ECM Motor Multipoise 2 Stage 17"

    International Comfort Products G96VTN0801716B

    • Item#:
    G96VTN0801716B
    Manufacturer Item:
    G96VTN0801716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    QuietComfort 96 Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Gas Furnace 60K BTU 96% AFUE ECM Motor Multipoise 2 Stage 14",

    International Comfort Products G96VTN0601412B

    • Item#:
    G96VTN0601412B
    Manufacturer Item:
    G96VTN0601412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96VTN

    97% Modulating Communicating Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN0801714B

    • Item#:
    G97CMN0801714B
    Manufacturer Item:
    G97CMN0801714B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-Care_Misc
    G97CMN_Install
    G97CMN_Spec

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet



    International Comfort Products G97CMN0601714A

    • Item#:
    G97CMN0601714A
    Manufacturer Item:
    G97CMN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN0802120B

    • Item#:
    G97CMN0802120B
    Manufacturer Item:
    G97CMN0802120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0901716B

    • Item#:
    G80CTL0901716B
    Manufacturer Item:
    G80CTL0901716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • Operates quieter at lower heating rates
  • Variable speed induced draft combustion blower
  • Variable speed, constant airflow, communicating ECM blower motor
  • Insulated steel cabinet

    International Comfort Products G97CMN1002122B

    • Item#:
    G97CMN1002122B
    Manufacturer Item:
    G97CMN1002122B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G97CMN-ICP-Care_Misc
    G97CMN-ICP_Install
    G97CMN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0701716B

    • Item#:
    G80CTL0701716B
    Manufacturer Item:
    G80CTL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0702120A

    • Item#:
    G80CTL0702120A
    Manufacturer Item:
    G80CTL0702120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    • Item#:
    G80CTL0702120B
    Manufacturer Item:
    G80CTL0702120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    96% Variable-Speed Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±

    International Comfort Products G96CTN1202422B

    • Item#:
    G96CTN1202422B
    Manufacturer Item:
    G96CTN1202422B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL1102120B

    • Item#:
    G80CTL1102120B
    Manufacturer Item:
    G80CTL1102120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec
    |◀ ◀ 181 - 192 of 333 ▶ ▶|
    View: