Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ 157 - 168 of 271 ▶|
View:
Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

Nortek Global (Intertherm) MG2R045F1AAM2

Item#:
MG2R045F1AAM2
Manufacturer Item:
1036485
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

Nortek Global (Intertherm) MG2S045F2ABM1

Item#:
MG2S045F2ABM1
Manufacturer Item:
MG2S-045F2ABM1
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
FEATURES and BENEFITS
  • Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
  • Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
  • Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
  • Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
  • High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
  • Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
  • Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
  • Reliable Burner: With uniform flame pattern extends life of heat exchanger.

    Nortek Global (Intertherm) MG1E090F1AAM2

  • Item#:
    MG1E090F1AAM2
    Manufacturer Item:
    1036483
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
    FEATURES and BENEFITS
  • Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
  • Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
  • Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
  • Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
  • High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
  • Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
  • Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
  • Reliable Burner: With uniform flame pattern extends life of heat exchanger.

    Nortek Global (Intertherm) MG1EB070F1AAM1

  • Item#:
    MG1EB070F1AAM1
    Manufacturer Item:
    1048452
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
    FEATURES and BENEFITS
  • Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
  • Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
  • Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
  • Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
  • High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
  • Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
  • Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
  • Reliable Burner: With uniform flame pattern extends life of heat exchanger.

    Nortek Global (Intertherm) MG1E056F1AAM2

  • Item#:
    MG1E056F1AAM2
    Manufacturer Item:
    1036477
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
    FEATURES and BENEFITS
  • Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
  • Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
  • Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
  • Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
  • High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
  • Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
  • Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
  • Reliable Burner: With uniform flame pattern extends life of heat exchanger.

    Nortek Global (Intertherm) MG1E056F1AAM1

  • Item#:
    MG1E056F1AAM1
    Manufacturer Item:
    MG1E-056F1AAM1
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
    Unique Manufactured Housing Design with a robust, 19 7/8"W, fully-insulated cabinet to fit the standard MH footprint. The MG2R is our flagship high-efficiency, HUD-compliant, gas furnace. AC-Ready 4-Ton ECM Blower with 5-speed taps, with/without a factory-installed 20"H coil box; allowing for a field-installed 20"/26"H coil box to suit your capacity and access needs. Refer to Split System sell sheets for AHRI-rated coil-fit matches. Quick LP Conversion with an easy-access gas valve regulator and manifold, using the factory-provided LP orifices included in the unit-literature kit. Category IV Venting Approval allows for vertical or horizontal direct venting using an approved non-metallic two-pipe system, or a concentric termination kit for application flexibility. Dependable Warranty and Support, handled directly by Style Crests dedicated HVAC Team, offering the most competitive warranty coverage and service in the Manufactured Housing Industry.

    Nortek Global (Intertherm) MG2SB072F2ABM1

    Item#:
    MG2SB072F2ABM1
    Manufacturer Item:
    1048430
    Manufacturer:
    NORTEK GLOBAL (INTERTHERM)
  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701712A

  • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN1352420A

  • Item#:
    N80ESN1352420A
    Manufacturer Item:
    N80ESN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0802120A

  • Item#:
    N96MSN0802120A
    Manufacturer Item:
    N96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0901714A

  • Item#:
    N80MSN0901714A
    Manufacturer Item:
    N80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 97.0% AFUE in upflow and horizontal positions, 95% AFUE in downflow position
  • Variable-speed, constant torque ECM blower motor
  • Supports single-stage and two-stage cooling units
  • Dehumidification feature in cooling
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0%
    at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Control of continuous fan speed from a compatible thermostat

    International Comfort Products N96VSN0601716B

  • Item#:
    N96VSN0601716B
    Manufacturer Item:
    N96VSN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 157 - 168 of 271 ▶|
    View: