S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
FEATURES AND SPECIFICATIONS:
APPLICATION VERSATILITY
Designed for the manufactured home market with flexibility in mind.
One-piece air handler with the ability to be factory built as upflow
(solid door) or downflow (louvered door) air handler. Can also be
field configured to opposite configuration with the proper
conversion kit. (Kits sold separately). 2 5 tons of cooling or
heating airflow with a range of electric heat kits.
MOTOR
Constant torque ECM, speeds and torque controlled by software to
maintain constant torque*. Direct drive blowers circulate air quietly
and efficiently. Motor speeds and torques pre-programmed in the
motor at the factory. Blowers mounted on rails so they can be
easily removed for service.
CABINET
Sturdy, galvanized steel cabinet with painted front panels.
Cabinet fully insulated with 1/2 micro mat non-hygroscopic
insulation to prevent sweating, to encapsulate glass fibers, and to
provide excellent R-value. Mechanical fastening ensure insulation
remains in place.
MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks.
Available from 3 to 20 KW. Models with electric heat include
sequencers and temperature limit switches for safe, efficient
operation. Modules are easily installed in the field using molex
plugs or can be ordered factory-installed. Controls are accessible
from the front for easy service. Disconnect does not protrude
through the wall panel.
ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time
delay extracting more heat/cool from the coil. Automotive pull-style
fuse integrated into board for easy diagnosis and replacement of Fuse
APPLICATION VERSATILITY
MOTOR
CABINET
MODULAR ELECTRIC HEAT KITS
ELECTRONIC CIRCUIT BOARD
AED-L-003+FCLL10
Item#:
AED-L-003+FCLL10
Manufacturer Item:
AED-L-003+FCLL10
Manufacturer:
ASPEN MFG. LLC
APPLICATION VERSATILITY
Designed for the manufactured home market with flexibility in mind. Onepiece air handler with the ability to be factory built as upflow (solid door) or
downflow (louvered door) air handler. Can also be field configured to opposite
configuration with no additional parts or kits. 2 5 tons of cooling or heating
airflow with a range of electric heat kits.
MOTOR
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service. CABINET
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place. MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel. ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board. WARRANTY
Hassle-free five-year limited parts warranty
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service.
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place.
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel.
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board.
Hassle-free five-year limited parts warranty
Aspen AED-002+FCL10
Item#:
AED-002+FCL10
Manufacturer Item:
AED-002+FCL10
Manufacturer:
ASPEN MFG. LLC
Empire Comfort DV210SGXNAT Wall Furnace Direct Vent Natural Gas 10K BTU,
,
,
Empire Comfort DV210SGXNAT
Item#:
DV210SGXNAT
Manufacturer Item:
DV210SGX NAT
Manufacturer:
EMPIRE COMFORT SYSTEMS, INC.
Standard Features
Controlled by sequencers for better temperature control
Mutliple branch circuit capability
Completely assembled and tested
Built-in overcurrent protection on all units (as indicated in the electrical data)
Control circuit arranged to readily permit staging
Factory-installed circuit breakers available on specific models (see electrical data)
Fuse link secondary high-temperature limit control
Plug-in wiring harness for ease on installation into air handler
Rust-resistant nickel chromium heat elements
ETL Listed
ETL Listed
Bosch EHK-05J
Item#:
EHK-05J
Manufacturer Item:
8733953088
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Advance Distributers 65500906 A/C Parts Electric Heater
Advance Distributers A/C Parts 65500906
Item#:
65500906
Manufacturer Item:
65500906
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
Armstrong Air Conditioning 2-Stage Variable Speed Gas Furnace, 95% AFUE, 120 VAC, 44,000 BTU, 1200 cfm
,
- Aluminized steel design primary heat exchanger with crimped non welded construction
- AL 29-4C stainless steel secondary heat exchanger, non-welded crimped S-curve primary heat exchanger design for maximum durability
- Aluminized steel in shot burners for smooth ignition, isolated burner enclosure for quiet operation
- Standardized widths for easy coil fit, unitized construction for cabinet integrity
- Heat exchanger compartment is insulated to increase efficiency and reduce sound levels
- Efficient ECM variable speed blower motor
- Motor features soft start and soft stop for quiet operation
- Active and passive dehumidification feature
- Easily removable slide out blower design
- Dynamically balanced blower wheel with resilient motor mounts for smooth and quiet operation
- 2-speed induced draft motor with stainless steel shaft, steel ball bearings and fan cooled for long life
- Direct vent refers to a combustion air supply intake pipe installed in conjunction with flue gas vent pipe
- Integrated ignition and fan control
- System sentry control retains last 5-fault codes with push butTon memory recall, regardless of power interruption
- Hot surface ignition system uses silicon nitride igniter
- Control circuit is fuse protected
- 2-stage thermostat is recommended when installed with 2-stage cooling unit
- Left or right gas and electric entry
- Certified for direct vent (2-pipe) or non-direct (1-pipe) applications
- 10 years limited parts warranty
,
Armstrong Air Conditioning 67W68
Item#:
67W68
Manufacturer Item:
95G2UH045BV12
Manufacturer:
ALLIED AIR ENTERPRISES
APPLICATION VERSATILITY
Downflow only application. Can be installed in closet and alcove.
MOTOR
X13 speeds and torques are controlled by software embedded in the motor to
maintain constant torque. Motors are pre-programmed at the factory.
CABINET
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 faced insulation to prevent sweating and mold growth, to
encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure
insulation remains in place.
MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available
from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed
in the field using molex plugs or can be ordered factory-installed. Controls
are accessible from the front for easy service. Disconnect does not protrude
through the wall panel.
ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil.
BLOWER
Direct drive variable-speed blowers circulate air quietly and efficiently. Variable speed motors allow for precise air volume selection. Motor speeds and
torques programmed in the motor. Blowers mounted on rails so they can be
easily removed for service.
WARRANTY
Five-year limited parts warranty
MODULAR ELECTRIC HEAT KITS
ELECTRONIC CIRCUIT BOARD
BLOWER
WARRANTY
Aspen AEN-000+FCL15
Item#:
AEN-000+FCL15
Manufacturer Item:
AEN-000+FCL15
Manufacturer:
ASPEN MFG. LLC
APPLICATION VERSATILITY
Downflow only application. Can be installed in closet and alcove.
MOTOR
X13 speeds and torques are controlled by software embedded in the motor to
maintain constant torque. Motors are pre-programmed at the factory.
CABINET
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 faced insulation to prevent sweating and mold growth, to
encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure
insulation remains in place.
MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available
from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed
in the field using molex plugs or can be ordered factory-installed. Controls
are accessible from the front for easy service. Disconnect does not protrude
through the wall panel.
ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil.
BLOWER
Direct drive variable-speed blowers circulate air quietly and efficiently. Variable speed motors allow for precise air volume selection. Motor speeds and
torques programmed in the motor. Blowers mounted on rails so they can be
easily removed for service.
WARRANTY
Five-year limited parts warranty
MODULAR ELECTRIC HEAT KITS
ELECTRONIC CIRCUIT BOARD
BLOWER
WARRANTY
Aspen AEN-000+FCL10
Item#:
AEN-000+FCL10
Manufacturer Item:
AEN-000+FCL10
Manufacturer:
ASPEN MFG. LLC
International Comfort Products CAELHEAT056A00 Electric Heater 15 KW 460/3
International Comfort Products CAELHEAT056A00
Item#:
CAELHEAT056A00
Manufacturer Item:
CAELHEAT056A00
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Cozy CDV305D Natural Gas Wall Furnace Direct Vent 30K BTU
Product FeaturesContinuous-Seam Welded Combustion Chamber
Constructed of heavy 18 gauge steel maximizes heat transfer
Inner Jacket Suspended with U type interlocking brackets & is easily removed for cleaning
430 Stainless Steel, Ported Burner
Provides quiet ignition/extinction and excellent flame characteristics for Natural and LP gas
100% Safety Pilot / Built in Pressure Regulator Completely stops the flow of gas in the event pilot flame is extinguished
Low BTU Pilot Durably constructed of stainless steel and provides maximum efficiency during standby
Wall Thermostat Standard on all models and provides maximum comfort and ease of operation
Matchless Spark Ignition Eliminates the need for matches or lighting tools,
,
Product Features
,
Cozy CDV305D
Item#:
CDV305D
Manufacturer Item:
CDV305D
Manufacturer:
COZY HEATING SYSTEMS LLC
International Comfort Products Fast Heating Parts CRHEATER331A00 Electric Heater 208/230 VAC 15.5 KW
International Comfort Products Fast Heating Parts CRHEATER331A00
Item#:
CRHEATER331A00
Manufacturer Item:
CRHEATER331A00
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS