Oil Furnace Lo-Boy 101-132K BTU Output 85% AFUE 120 VAC 7" Flue 5 Ton Cooling Rear Flue

Rear flue Lowboy with PSC Direct Drive Blower Motor and Beckett AFG Burner,
,

Thermo Pride VL8RA119P60B

Item#:

VL8RA119P60B

Manufacturer Item:

VL8RA119P60B

Manufacturer:

THERMO PRODUCTS, LLC

VL8RA119P60B_Spec

Electric Strip Heater 240/1 10 KW

Warran WHE1002Bx Electric Strip Heater 240/1 10 KW,
,

Warren Technology WHE1002BX

Item#:

WHE1002BX

Manufacturer Item:

WHE1002BX

Manufacturer:

WARREN TECHNOLOGY

WHE1002BX

Electric Heater 240 VAC 5KW 230 VAC W/Circuit Breaker

Warren WHE0502BX Electric Heater 240 VAC 5KW 230 VAC

Warren Technology WHE0502BX

Item#:

WHE0502BX

Manufacturer Item:

WHE0502BX

Manufacturer:

WARREN TECHNOLOGY

WHE0502BX

Electric Heater 240/1 VAC 10KW 42 Amps

Warren WHE1002X Electric Heater 240 VAC 10KW 230 VAC
,
,

Warren Technology WHE1002X

Item#:

WHE1002X

Manufacturer Item:

WHE1002X

Manufacturer:

WARREN TECHNOLOGY

WHE1002X

Unit Heater Suspended Hydronic 33,000 (High) 23,000 (Low) Copper Tube/Alumimun Fins

Reznor Model WS Steam/Hot Water Suspended Heaters are design-engineered to be technically advanced and esthetically pleasing which makes it the hydronic heater for the 21st century.
This smart new concept in commercial heating units will accommodate all architects who are looking for something new and different.

The heating range of Model WS is 13,000 to 350,000 BTUH. The air volume ranges from 270 to 4,750 CFM.

The heat exchanger is made of one or two rows of steel coils (standard or optional copper coils) with aluminum

The standard steel tubing is very strong and long lasting. Steel tubing is designed for hot water applications up to 150 psi.

The copper tubing used for the heating coil is very thick (0.03, 0.75 mm), making Reznor heating coils extremely sturdy and long lasting. The copper tube diameter is 0.867 (22 mm) O.D. The large tube diameter reduces the water pressure drop, which means these units require lower pump pressure than other hydronic heaters. It also allows a very rapid heat radiation. For steam heating applications copper tube (Option HA12) is required. Designed for high working steam pressure up to 145 psi (10 bar), every heat exchanger is subjected to a pressure test at over 350 psi (25 bar) before leaving the factory.

The heat exchanger assembly receives a special epoxy-polyester powder coating which makes the coil long lasting and increases the thermal output.

The Fan/Motor Assembly is made up of three components: the fan, the motor and the fan guard, which also acts as the main support for the fan. This fan guard is galvanized for protection against corrosion, and is mounted onto the main casing with anti-vibration rubber mountings. The fan guard meets OSHA requirements.*

The standard 2-speed motor is a hermetically sealed motor which is maintenance free. The motor is wired for Data Chart for fan RPM, heating output and CFM ranges. output, or low speed for reduced noise level. All motors have internal protection as a standard feature.

All Model WS units can be installed for either vertical or horizontal discharge.

pre-painted steel helps protect the cabinet against oxidation.

The cabinet is held together by shake-proof screws and molded corner sections to add additional strength and installation.

The optional Air Flow Induction Optimizer is available for horizontally discharged units. The Air Flow Induction the heated air stream. See the optional accessories section for more information.

Units are packaged into strong corrugated cardboard cartons with strengthened upper and lower side sections. These containers are clearly marked with the model number, size and approximate shipping weight.

Units are manufactured in an ISO 9001 registered facility.

Reznor WS23/33C

Item#:

WS23/33C

Manufacturer Item:

WS23/33C

Manufacturer:

REZNOR LLC

WS-Series-Broc

WS-Series-Install

WS-Series-Spec

Duct Furnace Suspended 250K BTU Gravity Vented 120 VAC

Nortek Global(Reznor) X-250 Duct Furnace Suspended 250K BTU Gravity Vented 120 VAC

Reznor X-250

Item#:

X-250

Manufacturer Item:

X-250

Manufacturer:

REZNOR LLC

X-Series-Gas-Conversion-Parts_Misc

X-Series-Reznor_Spec

97% Gas Furnace Multi-Position 2-Stage 80K BTU ECM

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling or heat pump heating.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surface ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement.

Continuous fan options for indoor air quality (IAQ) performance.

Airflow leakage less than 2% of nominal airflow for duct performance testing conditions.

Low unit current requirement for easy replacement application.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety.

Inducer rotates for easy conversion of venting options.

Five-speed direct drive standard ECM blower motor.

Hi-tech tubular aluminized steel primary heat exchanger.

Corrosion resistant stainless steel secondary heat exchanger including rear cover pan and front vestibule panel.

Quiet inducer operation.

Timed on, adjustable off blower capability for maximum comfort.

Blower door safety switch below the blower deck.

Solid removable bottom panel allows easy conversion for bottom return air applications.

External air filters are used for maximum flexibility in meeting customers' IAQ needs.

1/4 turn knobs are provided for easy independent door removal.

Insulated blower compartment for thermal and acoustic performance.

Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.

Protection included from air intake, exhaust vent, or condensate blockage. Venting applications may be installed as either two-pipe sealed combustion or single-pipe vent using indoor combustion air.

No special vent termination required.

These condensing furnace models produce <40 ng/J NOx emissions.

Fold-up duct connector flanges for application flexibility.

Patented self-priming internal condensate trap design for easy installation.

York Z9ET080B12SMPS1

Item#:

Z9ET080B12SMPS1

Manufacturer Item:

Z9ET080B12SMPS1

Manufacturer:

BHC RESIDENTIAL AND LIGHT COMM

York Gas Fired Furnace 80% 60,000 BTU

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Blower-off delay for cooling SEER2 improvement

Easy access to controls to connect power and control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit current requirement for easy replacement application

All models are convertible to use propane (LP) gas.

Electronic hot surface ignition saves fuel cost with increased dependability and reliability.

100% shut-off main gas valve for extra safety

Five-speed direct drive standard ECM blower motor

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling

Hi-tech tubular aluminized steel primary heat exchanger

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

Solid removable bottom panel allows easy conversion for bottom return air applications

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions

No electrical knockouts to deal with, making installation easier

Fold-up duct connector flanges for application flexibility

Quiet inducer operation

Inducer rotates for easy conversion of venting options

Fully supported blower assembly for easy access and removal of blower

External air filters are used for maximum flexibility in meeting customers' indoor air quality (IAQ) needs.

Venting applications: install as a common vent with other gas-fired appliances or use a lined masonry chimney.

1/4 turn knobs are provided for easy independent door removal.

High-efficiency blower motor for lower electrical power usage and improved AC SEER2 ratings

Insulated blower compartment for thermal and acoustic performance

Item#:

Z8ES060A12SMPS1

Manufacturer Item:

Z8ES060A12SMPS1

Manufacturer:

BHC RESIDENTIAL AND LIGHT COMM

Z8ES SERIES SPEC

York Gas Fired Furnace 90% 100,000 BTU

Features

Easily applied in upflow, horizontal left or horizontal right, or downflow installation with minimal conversion necessary.

Venting kit for downflow (counter-flow) applications on B, C, and D cabinets where side discharge is not possible.

The unit cabinet is compact and easy to install with an ideal height of 33 in.

Full length fold-up duct connector flanges for application flexibility.

Easy access to controls to connect power and control wiring.

No electrical knockouts to deal with, making installation easier.

24 V, 40 VA control transformer and control provisions supplied for single or multi-stage add on cooling.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Front-facing screws on flame sensor and hot surgace ignitor for ease of service.

Front-facing screws on blower assembly for easy access and removal of blower.

Constant torque blower motor for cooling SEER2 enhancement.

Blower-off delay for cooling SEER2 improvement

Item#:

Z9ES100C16SMPS1

Manufacturer Item:

Z9ES100C16SMPS1

Manufacturer:

BHC RESIDENTIAL AND LIGHT COMM

Z9ES060B12SMPS1 submittal

97% Gas Furnace Multi-Position 2-Stage 100K BTU ECM