FEATURES

Two stage heating operation includes two stage gas valve, two stage inducer operation and variable speed ECM blower operation. Adjustable delay timer allows two stage operation with a single stage thermostat.
Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.
Compact, easy to install, ideal height 33" tall cabinet.
ECM variable speed drive for cooling SEER enhancement, improved comfort with optional airflow delay profiles, and continuous fan options for IAQ performance.
Easy access to controls to connect power/control wiring.
Built-in, high level self diagnostics with fault code display.
Low unit amp requirement for easy replacement application.
All models are convertible to use propane (LP) gas.
Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.
100% shut off main gas valve for extra safety.
24V, 40 VA control transformer and blower relay supplied for add-on cooling.
Hi-tech tubular aluminized steel primary heat exchanger with stainless steel tube/aluminum fin secondary heat exchanger for outstanding efficiency.
Solid removable bottom panel allows easy conversion.
Airflow leakage less than 1% of nominal airflow for duct performance testing conditions.
No knockouts to deal with, making installation easier.
Movable duct connector flanges for application flexibility.
Quiet inducer operation, burner, and blower operation.
Inducer rotates for easy conversion of venting options.
Fully supported blower assembly for easy access and removal of blower.
External air filters used for maximum flexibility in meeting customers IAQ needs.
Insulated blower compartment for thermal and acoustic performance.
1/4 turn knobs provided for easy independent door removal.
Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.
Protection included from air intake, exhaust vent or condensate blockage.
Venting applications maybe installed as either 2 pipe sealed combustion or single pipe vent using indoor combustion air.
These models may be connected as part of a communicating control system using a 4-wire connection bus.

FEATURES

Modulating heating operation includes:

Modulating gas valve, inducer and circulating blower

Modulating operation from 100% to 35% input in 100 increments with nearly constant temperature rise.

Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.

Compact, easy to install, ideal height 33" tall cabinet.

ECM variable speed drive for cooling SEER enhancement, improved comfort with optional airflow delay profiles, and continuous fan options for IAQ performance.

Easy access to controls to connect power/control wiring.

Built-in, high level self diagnostics with fault code display.

Low unit amp requirement for easy replacement application.

All models are convertable to use propane (LP) gas.

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.

100% shut off main gas valve for extra safety.

24V, 40 VA control transformer and blower relay supplied for add-on cooling.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions.

Solid removable bottom panel allows easy conversion.

Hi-tech tubular aluminized steel primary heat exchanger with stainless steel tube/aluminum fin secondary heat exchanger for outstanding efficiency.

No knockouts to deal with, making installation easier.

Movable duct connector flanges for application flexibility.

Quiet inducer operation, burner, and blower operation.

Inducer rotates for easy conversion of venting options.

Fully supported blower assembly for easy access and removal of blower.

External air filters used for maximum flexibility in meeting customers IAQ needs.

Insulated blower compartment for thermal and acoustic performance.

1/4 turn knobs provided for easy independent door removal.

Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.

These models may be connected as part of a communicating control system using a 4-wire connection bus

FEATURES

Modulating heating operation includes:

Modulating gas valve, inducer and circulating blower

Modulating operation from 100% to 35% input in 100 increments with nearly constant temperature rise.

Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.

Compact, easy to install, ideal height 33" tall cabinet.

ECM variable speed drive for cooling SEER enhancement, improved comfort with optional airflow delay profiles, and continuous fan options for IAQ performance.

Easy access to controls to connect power/control wiring.

Built-in, high level self diagnostics with fault code display.

Low unit amp requirement for easy replacement application.

All models are convertable to use propane (LP) gas.

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.

100% shut off main gas valve for extra safety.

24V, 40 VA control transformer and blower relay supplied for add-on cooling.

Airflow leakage less than 1% of nominal airflow for duct performance testing conditions.

Solid removable bottom panel allows easy conversion.

Hi-tech tubular aluminized steel primary heat exchanger with stainless steel tube/aluminum fin secondary heat exchanger for outstanding efficiency.

No knockouts to deal with, making installation easier.

Movable duct connector flanges for application flexibility.

Quiet inducer operation, burner, and blower operation.

Inducer rotates for easy conversion of venting options.

Fully supported blower assembly for easy access and removal of blower.

External air filters used for maximum flexibility in meeting customers IAQ needs.

Insulated blower compartment for thermal and acoustic performance.

1/4 turn knobs provided for easy independent door removal.

Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.

These models may be connected as part of a communicating control system using a 4-wire connection bus

FEATURES

Two stage heating operation includes two stage gas valve, two stage inducer operation and variable speed ECM blower operation. Adjustable delay timer allows two stage operation with a single stage thermostat.
Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.
Compact, easy to install, ideal height 33" tall cabinet.
ECM variable speed drive for cooling SEER enhancement, improved comfort with optional airflow delay profiles, and continuous fan options for IAQ performance.
Easy access to controls to connect power/control wiring.
Built-in, high level self diagnostics with fault code display.
Low unit amp requirement for easy replacement application.
All models are convertible to use propane (LP) gas.
Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.
100% shut off main gas valve for extra safety.
24V, 40 VA control transformer and blower relay supplied for add-on cooling.
Hi-tech tubular aluminized steel primary heat exchanger with stainless steel tube/aluminum fin secondary heat exchanger for outstanding efficiency.
Solid removable bottom panel allows easy conversion.
Airflow leakage less than 1% of nominal airflow for duct performance testing conditions.
No knockouts to deal with, making installation easier.
Movable duct connector flanges for application flexibility.
Quiet inducer operation, burner, and blower operation.
Inducer rotates for easy conversion of venting options.
Fully supported blower assembly for easy access and removal of blower.
External air filters used for maximum flexibility in meeting customers IAQ needs.
Insulated blower compartment for thermal and acoustic performance.
1/4 turn knobs provided for easy independent door removal.
Internal condensate trap design (patent pending) provides condensate management options and is self priming to prevent nuisance problems.
Protection included from air intake, exhaust vent or condensate blockage.
Venting applications maybe installed as either 2 pipe sealed combustion or single pipe vent using indoor combustion air.
These models may be connected as part of a communicating control system using a 4-wire connection bus.

Thermo Pride VH8FA119T60B Highboy Oil Furnace, 85% AFUE, 120 volt, 156250/40000/119000 BTU Input, 132000/119000/101000 BTU Output

• With Beckett AFG burner
• Front flue
• Heavy duty 22 gauge cabinet with powder coated finish for long lasting durability
• Dual cleanout ports and 40 VA transformer and fan control are factory wired for easy add-on cooling installation
• 5 Ton cooling capacity
• No sharp edges folded and flattened and independent door removal
• Spirit oil furnaces are standard equipped with a multi-speed direct drive blower motor, The entire blower assembly can be removed for cleaning
• 20" width x 20" depth supply air outlet
• 23-3/4" height x 19" depth return air outlet
• 7" flue diameter
• The full cabinet foil faced high density fiberglass insulation reduces heat loss and sound levels

,

,

Thermo Pride VH8FA119T60B

Thermo Products VLF-DBP Oil Furance Lo-Boy Front Flue,
,

Thermo Pride VLF-DBP

Thermo Pride VH8FA119P60B Highboy Oil Furnace, 85% AFUE, 120 volt, 156250/40000/119000 BTU Input, 132000/119000/101000 BTU Output

• With Beckett AFG burner
• Front flue
• Heavy duty 22 gauge cabinet with powder coated finish for long lasting durability
• Dual cleanout ports and 40 VA transformer and fan control are factory wired for easy add-on cooling installation
• 5 Ton cooling capacity
• No sharp edges folded and flattened and independent door removal
• Spirit oil furnaces are standard equipped with a multi-speed direct drive blower motor, The entire blower assembly can be removed for cleaning
• 20" width x 20" depth supply air outlet
• 23-3/4" height x 19" depth return air outlet
• 7" flue diameter
• The full cabinet foil faced high density fiberglass insulation reduces heat loss and sound levels

,

,

Thermo Pride VH8FA119P60B